Technical brief template
Organise the project objective, services and responsibilities. The guide provides a TXT template and a version to select and copy.
View the template and how to use it Download editable TXT
Eventos Globales
Compare equipment and services for your event, prepare content and coordinate tasks with your agency, venue and technical suppliers. Choose a guide to help decide between LED rental and purchase, organise playback or prepare sound and lighting using planning criteria, official documentation and checklists.
Reading is optional: choose the topic that helps you or enquire now with what you already have. Start with an idea, even if dates, venue or dimensions are still undecided.
Reference documentation
Search for a task, model or symptom. Find the guide, check the manual edition and continue to the service you need for your event.
These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.
234 results
Separate cabinet mapping from cropping and layer size when preparing presentations and two sources. This guide covers the original VX1000; VX1000 Pro capabilities differ.
Manuals and editionsPrepare the COEX system from receiving cards and panel configuration through layers and port distribution. Identify VMP, firmware and operating mode before calculating capacity.
Manuals and editionsFollow a source from Dante or a local input through the channel, bus and destination. Distinguish patching, mixing and scene recall before changing the show.
Manuals and editionsPrepare speech and music checks with identified sources, cabling, positions and levels. Compare clarity across listening areas before choosing more level or a different distribution.
Manuals and editionsOrganise patch, groups, presets and cues for the programme, and check session membership and output separately. The reference is compact XT 4010505, not onPC command wing XT.
Manuals and editionsPrepare lighting control by distinguishing the computer, Eos software, key and output interface. Complete the check at the responding fixture as well as the values on screen.
Manuals and editionsCompare image width, optical throw, signal and actual room light when preparing a conference. Check the regional model suffix: the PT-VMZ61U reference and its accessories do not automatically describe every unit in the series.
Manuals and editionsPlan playback around content, composition and output destinations. Review version, conditions of use and computer capacity as separate decisions, with tests before the event.
Manuals and editionsIdentify installed cards and separate control, preview and LED data. This guide uses H2 Specifications V1.17.0 and H Series Manual V1.15.0; do not transfer limits from H5 or H9.
Manuals and editionsPrepare composition and LED mapping separately, checking cards, senders and operating mode. Distinguish a preset from a configuration backup and rehearse recovery outside the programme.
Manuals and editionsPrepare an LED system with A10s Pro or A5s Plus from its controller, cabinet files and versions. Distinguish NovaLCT from COEX/VMP and plan a test with the person responsible for the display.
Manuals and editionsCompare presentation formats with the canvas, operating mode and physical cabinet distribution. This guide uses MX20 Specifications and User Manual V1.5.0; identify receiving cards and versions before preparing the configuration.
Manuals and editionsPlan the optical path between control and display by identifying the variant and both ends. Compare CVT4K-S V1.0.5 and CVT4K-M V1.0.4, separating link status, data transmission and the correct image in each group.
Manuals and editionsPrepare a display around a defined canvas: distinguish LED sending from upstream scaling or composition. Check inputs, port capacity and mapping against MCTRL4K User Manual V1.2.0 and Specifications V1.2.2.
Manuals and editionsCheck cropped presentations, cabinet order or settings that change after power-up. This guide covers the original MCTRL660 using User Manual V1.4.4 and Specifications V1.4.3; identify the unit before transferring information from MCTRL660 PRO or MCTRL600.
Manuals and editionsPrepare a stand, conference or stage from source format through layers and LED mapping. The reference is NovaPro UHD Jr User Manual V1.5.0; the Jr suffix and document edition are part of the identification.
Manuals and editionsPrepare a composition change from PVW to PGM and distinguish a preset, saving to receiving cards and a USB backup. This guide uses NovaPro UHD V1.2.0; identify that model, its input card and firmware before rehearsal.
Manuals and editionsChoose how to frame a presentation or video and separate the layer from the physical cabinet map. The reference is the original VX600: User Manual V1.5.0 and Specifications V1.7.1. Confirm its operating mode before preparing scaling or PIP.
Manuals and editionsPrepare an HD production and define the files needed after the event: program, ISO inputs, audio and editing project. Identify the HD8 ISO variant and check media and files during rehearsal.
Manuals and editionsDefine what each display, stream and recorder must receive. Compare ATEM Television Studio 4K8 UHD program recording with the external recording needed to retain separate cameras.
Manuals and editionsPrepare an HDMI presentation or SDI feed for its event destination. Separate 12G-CROSS input, scaler and output, then check picture and sound using operating manual 1.4.
Manuals and editionsCompare MD-LX direct conversion with the MD-HX scaler. These setup notes apply to MD-HX serial prefixes CLA/CLB/CLC and manual 1.5; identify the serial prefix before rehearsal.
Manuals and editionsPrepare speech, playback and audio feeds for the room, video or recording. Identify Dante-equipped DM3 versus DM3 Standard and separate network subscription, INPUT PATCH and USB/PB sources.
Manuals and editionsMove I/O closer to the stage while distinguishing connectors, mixing channels and buses. Check Tio1608-D2, console, sample rate and setup method before integrating the rack.
Manuals and editionsPrepare event sources while separating mixing channels, local connectors and remote inputs. Review NY64-D, SLOT, HA control and USB roles using TF1-specific documentation.
Manuals and editionsPrepare audio and operator handover by distinguishing Dante patching, internal patching, preamp control and scenes. Save a rehearsal variant and define what must change and remain.
Manuals and editionsPrepare speech, playback and feeds for house, stage, remote guests and recording. Compare DM7 Compact resources and plan scenes and preamp ownership with your production team.
Manuals and editionsCheck remote I/O, startup state and preamp ownership. Follow a signal from microphone to console and each return, distinguishing D3 from D2 and Rio1608-D3.
Manuals and editionsPrepare house, remote-call and recording audio as separate feeds. Check USB source, tap point and filters before using a received file on SQ-5.
Manuals and editionsPrepare the Show and scenes for running-order changes. Separate patching, the active Mix and enabled functions on the Avantis Solo used for the event.
Manuals and editionsPrepare the event mix and define the files to deliver. Identify M32R LIVE and its installed card before choosing tracks, computer, media and backup scope.
Manuals and editionsFollow the signal from transmitter to console. Separate RF energy, active link and audio, prepare the channel spare and check MIC/LINE before adjusting levels.
Manuals and editionsPrepare stage inputs and returns with a compatible console. Separate synchronization, patching and preamp control before adding I/O or sharing sources between operators.
Manuals and editionsPrepare one microphone source for different preamps. Identify direct outputs, the isolated output and phantom owner for house, monitors or recording.
Manuals and editionsConnect keyboards or playback to the console while keeping left and right. Prepare adapters, mic inputs and levels so the audience receives the complete program.
Manuals and editionsPrepare four balanced analog signals between event areas. Identify modules, dedicated cabling and microphone power before using a venue route.
Manuals and editionsPrepare a microphone-and-video presentation or a console feed. Compare inputs, level control and distribution of the same program to another speaker.
Manuals and editionsPrepare speech and music for a ceremony or presentation with waiting time. Identify MK2, sources and intended power to rehearse program continuity.
Manuals and editionsChoose the input for your source and prepare the feed to another destination. Separate gain, mixing and processing for K12.2 room or stage-feed use.
Manuals and editionsPrepare a sound system’s bass extension. Identify signals, feeds to main speakers, filters and control responsibilities before choosing the system.
Manuals and editionsPrepare wall lighting and accents: identify original AX5 or BTB, control source, filter and operating time.
Manuals and editionsSeparate RGB plate, white tubes and tilt using COLORSTRIKEMV2 manual Rev. 15 and chart Rev. 10; prepare the patch and camera rehearsal.
Manuals and editionsPrepare visible practical lamps: compare FP7-E26, E27 and B22, continuous power, control and testing with the actual fixture.
Manuals and editionsPrepare accents for objects and details: distinguish AX3-CRMX from AX3-BTB, choose a diffuser, app bridge and control method.
Manuals and editionsPrepare SDI-to-USB capture and app camera/audio selection. Check the result from the receiving participant.
Manuals and editionsPrepare program, audio, network and recording storage. Separate local output, platform reception and deliverable files.
Manuals and editionsPlan up to four HD/SD files, with input, audio and destination defined per channel. Check delivery in the editing system.
Manuals and editionsPrepare signal, codec, media and monitoring to record program or play a clip. Separate these tasks before building the system.
Manuals and editionsPrepare the path between camera, control and destination with the correct SDI/fiber pair. Separate transport, conversion and reception testing.
Manuals and editionsTrace content and reference separately. Identify groups, formats and receivers before preparing system synchronization.
Manuals and editionsPrepare picture, audio and ATC paths separately. Choose the mode, identify each source and check the screen, recording or streaming result.
Manuals and editionsSeparate picture reference and LTC. Record model, version, terminals and destinations for the multicamera test.
Manuals and editionsIdentify processor, connector and output format. Prepare the audio map and check reference, picture and timecode separately.
Manuals and editionsPrepare distribution from an existing generator: identify input, termination, gain and receivers. Compare the direct connection with every branch.
Manuals and editionsPrepare microphone sends and remote returns as separate paths. Define echo reference, application selection and listening at each destination.
Manuals and editionsCompare ceiling and close microphone pickup for the room. Prepare networking, coverage, conferencing interface and remote participant listening.
Manuals and editionsPlan two wireless channels with an APXD2 base and compatible transmitters. Separate power, USB audio, call sends and room listening.
Manuals and editionsChoose stations and speaking arrangements for a discussion table. Define chairperson, requests and audio feeds with the complete MXCW system.
Manuals and editionsPlan the table around participants, speaking arrangements and listening. Identify WD unit, access point, microphones and batteries separately.
Manuals and editionsDefine languages, interpreter listening and the signal required at each destination. Prepare DCNM-IDESK within the applicable system.
Manuals and editionsDefine simultaneous voices, transmitters and the console feed. Prepare standard EM 2 with its own power and connections.
Manuals and editionsFollow each voice from transmitter to console and final destination. Choose analog or Dante output and prepare an identified control path.
Manuals and editionsChoose handheld use and prepare band, synchronization, mute and level through to each destination.
Manuals and editionsPrepare four receiver channels with identified transmitters and decide which voices must arrive separately or mixed.
Manuals and editionsPrepare the two-channel Axient Digital system, replacement transmitters and console, remote or recording feeds.
Manuals and editionsCompare four voices in normal mode with two in Quadversity and prepare antennas, control and output format.
Manuals and editionsOrganize microphones, in-ears, antennas and zones; distinguish scanning, calculated plans, deployment and whole-system tests.
Manuals and editionsDefine each performer’s mix and prepare Stereo/MixMode, levels and panel locking with the P10R+ variant identified.
Manuals and editionsChoose separate outputs or intentional summing and prepare transmitters, console and recording for the exact variant.
Manuals and editionsFollow audio from microphones and playback to the audience; compare placement, sources and active-speaker settings.
Manuals and editionsDefine audience areas, sources and system role; identify MK2 and prepare connections, preset and listening checks.
Manuals and editionsChoose signal paths to the subwoofer and main speakers, identifying outputs, filters and preparation responsibilities.
Manuals and editionsCompare a modular array with distributed speakers and prepare geometry, signal paths, tasks and responsibilities for your event.
Manuals and editionsPrepare speech and video for the audience and useful listening for the presenter; identify inputs, outputs and mixes.
Manuals and editionsOrganize speech, video and music signals, control networking and recording feeds to prepare the room system.
Manuals and editionsIdentify DZR12 or DZR12-D and prepare the mix and output needed at each destination: audience, performer or another area.
Manuals and editionsDefine the subwoofer role, feeds to the main speakers and who prepares filtering, placement and whole-system checks.
Manuals and editionsIdentify speakers, loads, cabling and mixes; compare A/B routing and prepare the venue’s passive system with its documentation.
Manuals and editionsDefine sources, mixing and positions for announcements and music; compare a shared program with different zone requirements.
Manuals and editionsIdentify the model and path to each zone; coordinate sources, responsibilities and installed-system documentation.
Manuals and editionsPrepare a conference with cameras, presentations and graphics: define the room feed, speaker return and streaming computer feed.
Manuals and editionsOrganize SDI routes for displays, switchers and recorders. Identify where distribution, conversion or production switching is required.
Manuals and editionsPrepare conversion between computer, processing and display: define the received format and framing your audience needs.
Manuals and editionsChoose how the talk advances: direct speaker control or cues to an operator. Prepare USB, the main presentation and backup.
Manuals and editionsPrepare text, spreadsheets and video for the display and audience positions. Compare native resolution, input format and venue lighting.
Manuals and editionsDefine projection using the surface, available distance and appropriate lens. Prepare signal, content and rehearsal before finalizing configuration.
Manuals and editionsCheck whether the location supports the planned image width and separate size, framing and sharpness. Retain measurements and rehearsal results.
Manuals and editionsPrepare content for a stand, entrance or information display: define files, live input, independent pictures and recovery.
Manuals and editionsDefine what audiences see, what streams and what editing files are delivered. Prepare sources, layouts, speaker changes and system checks.
Manuals and editionsOrganize recording for talks and recurring sessions: sources, channels, storage, responsibilities and verification of delivered files.
Manuals and editionsDefine content, size and signal path. Identify panel and receiver, retain the map and agree a test with the intended camera.
Manuals and editionsPrepare the path from source to panels: format, canvas, per-port capacity, distribution and operating fallback for the identified version.
Manuals and editionsPrepare source, mapping and per-port load. Distinguish the data loop from processor recovery and agree which failures rehearsal must cover.
Manuals and editionsIdentify panels and DVI-D input. Prepare size and format upstream of S4 and check placement, proportions and timing with event content.
Manuals and editionsPrepare the DVI-D source, canvas and output path. Check what changes in Low Latency and define the continuity required for the event.
Manuals and editionsCompare documented V10 and V2 revisions before selecting files or processing. Identify the actual cabinet receiver, dimensions and documentation.
Manuals and editionsPlan canvas, sources, resources and multiview before operation. Distinguish composition from physical connections.
Manuals and editionsDefine HDMI sources, program, monitoring and external capture. Check Input 4 and EDID when a computer does not deliver the expected image.
Manuals and editionsPrepare PTZ positions, coverage, control and signal. Compare preset recall with rehearsal before overwriting memories.
Manuals and editionsDefine format and receiver per camera. Compare physical and IP signal, power, audio and delay at the planned destinations.
Manuals and editionsSeparate moiré, temporal bands and signal paths. Prepare framing, power, control and a recorded sample with the planned LED display.
Manuals and editionsDefine the complete position: compatible lens, support, camera signal, return and communication. Check each function at camera and production.
Manuals and editionsPrepare a stage-detail shot, its feed to production and its own recording. Define lens, position access, power, control and file acceptance.
Manuals and editionsChoose the feed to monitor and file to record. Separate video input, supported RAW capture, media, audio and the USB-C role.
Manuals and editionsAgree the shot, lens and sensor window; prepare the production feed, return and camera file separately.
Manuals and editionsDefine the output to record and clips to play. Prepare input, codec, media, audio and a fill/key test at the switcher.
Manuals and editionsPrepare SDI cameras/presentation, program and isolated takes. Agree the single USB-C role, monitoring, audio and editing handoff.
Manuals and editionsOrganize sources and assign program, room and monitoring per destination. Prepare ISO files, audio and a test of all planned paths.
Manuals and editionsPrepare slides/video against image size, light and back row. Compare throw/zoom with the planned mount and signal.
Manuals and editionsAssess projection near the screen with placement, focus and walking routes defined. Prepare content and connection for the actual space.
Manuals and editionsPrepare a 16:10 short-throw image with zoom and lens shift. Separate framing, readability and signal transport.
Manuals and editionsPrepare size/position with fixed optics, rehearse Quick Focus and check presenter movement with final content.
Manuals and editionsPrepare the entire ultra-short-throw space: surface, body, beam, circulation and signal. Use its manual references for placement.
Manuals and editionsPrepare distance, zoom, focus and content for this lamp-based Full HD model. Include sound and shutdown time in the event plan.
Manuals and editionsPrepare image width, placement and signal using the built-in lens and motorized zoom. Check audience readability before finalizing screen and setup.
Manuals and editionsPrepare a Full HD image close to the surface with placement, beam path and connections defined. Rehearse text, video and audio in the intended space.
Manuals and editionsPrepare readability, placement and signal for a conference with this WUXGA LCD laser model. Separate optics, 4K input, DIGITAL LINK and wireless accessories.
Manuals and editionsDefine body and lens by code, usable canvas and inputs in the proposed configuration. Prepare content and framing using the identified combination.
Manuals and editionsPrepare body/lens codes, content for 4K Crystal Motion and the EB-PQ2008B’s actual connections. Identify optics and inputs before finalizing setup.
Manuals and editionsPrepare a conference screen change: compare aspect ratio, distance and zoom, preserve settings and check image, sound and control with the actual source.
Manuals and editionsEvent preparation guide
Event preparation guide
Event preparation guide
Event preparation guide
Event preparation guide
Event preparation guide
Plan lighting distribution for a conference, theater or show using a source → engine → destination map. Separate physical connectors, network universes and the decision about which controller should act.
Manuals and editionsPlan the control-to-stage network around actual devices, destinations and distances. Separate Ethernet transport from DMX generation and verify the variant before selecting fiber or PoE power.
Manuals and editionsPlan lighting for a presentation, theater or show from the incoming file to the stage output. Separate version, patch, programming and testing so your production can agree who prepares each task and which services are needed.
Official version-specific documentationPlan stage, background and room lighting with clear responsibilities. Compare file, control surface and signal path before proposing a backup console for a conference, festival or show.
Official version-specific documentationPrepare an incoming MagicQ show when the stage uses different equipment from the original design. Separate patch adaptation, cue results and output mapping to agree preparation and operation.
Official edition-specific documentationA moving meter does not establish that a voice reaches the intended loudspeaker. For a plenary session, trace an identified source through socket, channel, mix and output. If a monitor remains audible with inputs muted, locate its actual path before raising levels or rebuilding the show.
Official edition-specific documentationBefore linking a second speaker, decide whether it needs the same source or a different mix. DZR10’s two outputs do not have identical selection options. Identifying channel and path avoids assuming the next device automatically copies the first speaker’s sound.
Official edition-specific documentationA rack appearing on screen does not establish that its microphone reaches a channel or the room. For a plenary with stage and console apart, prepare three separate checks: Dante reception, internal assignment and output to the destination. Preserve the current show before proposing changes.
Official edition-specific documentationFor a wall or column accent, start with surface, ambient light and total operating time. A unit switching on does not establish that it will retain the look until closing or receive console changes from its final position. Plan those two tests separately.
Official edition-specific documentationBefore counting available microphones, separate selected wireless family, enabled channels and audio path. Names on screen or an audible test do not establish that every voice reaches the event’s intended destinations.
Official edition-specific documentationPrepare an interview, lectern or discussion panel by separating the requested white light, the console profile and what each camera actually records. Use the worksheet to agree on a comparison before storing the event look.
Official edition-specific documentationPrepare presentation or remote-participant audio by separating playback, the send to the call and the return to the room. The diagram helps locate an application selection or missing subscription before blaming the adapter for absent audio.
Official edition-specific documentationPrepare a microphone presentation and reception music by identifying every source, its channel and who changes the program. Aim for understandable speech during entrances, pauses and closing remarks, with a path the operator can trace.
Official edition-specific documentationPrepare speech and playback for a talk by separating incoming signal, what the audience hears and what feeds another destination. Choosing the right output avoids expecting the second speaker to follow a change the first never transmits.
Official edition-specific documentationPrepare camera or presentation capture for a conference, stream or recording. Separate the source output, monitor picture and application input: each is a different check and needs its own result.
Official edition-specific documentationPlan welcome or sponsor playback by separating the approved file, prepared presentation and signal to the screen. An autonomous loop and a talk using editable slides require different content and operating decisions.
Official edition-specific documentationPrepare a conference with cameras, presentation and remote participant by separating what each destination sees and hears. Bus and source assignments matter as much as the cable: a fader or local screen alone does not establish what reaches the guest.
Official edition-specific documentationPrepare conference delivery by separating incoming program, encoding profile and audience playback. Local thumbnail, server connection and recorded file are different evidence; every agreed destination needs its own check.
Official edition-specific documentationPrepare a talk stream by separating four results: input program, Internet access, external reception and local file. Use this worksheet to agree on delivery and the owner of each check before a broadcast; a connected control screen does not establish audience picture and sound.
Official edition-specific documentationPrepare conference control by tracing transmitter → receiver → computer → application → screen. A reception light or edited setting does not establish that the correct slide reached the room. Use this guide to document the actual equipment and agree on a test using the event file.
Official edition-specific documentationFor control across stage, dance floor and perimeter, prepare one route per zone: console, network universe, radio output, receiver and fixture. Use this guide to locate the segment needing verification before blaming an unresponsive light on wireless transport. Data transport does not supply fixture power.
Official edition-specific documentationFor lights distributed around a room, first define who generates the scene and where it must arrive. MoonLite² can occupy different ends of the route: confusing receive with transmit changes the design. This worksheet separates application, radio link, DMX data and fixture response without claiming tested coverage.
Official edition-specific documentationFor a scene prepared on a laptop, separate device detection, application access, output universe and light response. A recognized USB device does not establish a ready scene. Use this guide to document the route and propose an off-program test without launching software or connecting equipment.
Official edition-specific documentationFor a stand with opening, demonstration and closing scenes, define what must play and who may trigger it first. Correct capture does not establish that the selected output delivers the universe to the lights. This guide organizes content, mapping and a proposed test with controls understandable to the event operator.
Official edition-specific documentationFor lighting control across event zones, preserve the logical map before moving cables or changing universes. An active Ethernet link and enabled port do not establish useful output. This guide separates network data, patch and DMX transmission, focusing on custom configurations that must remain recoverable.
Official edition-specific documentationIf a light responds manually but a recorded look is dark, preserve the file and compare control paths before deleting memories. This guide prepares a room with clear scenes and function-specific checks: fixture, patch, intensity source and playback. Manual response is a clue rather than full show validation.
Official edition-specific documentationTo light a lectern while keeping the screen behind it clear, describe the required area and edge first. Then review optics, position and control together. This guide records the patch and compares fixtures without confusing DMX reception, profile and mix; actual coverage and image need rehearsal.
Official edition-specific documentationFor a show with cues, called changes and multiple lighting zones, prepare file, operator and data paths together. This guide separates a mismapped output, incompatible version and partitioned session. It is documentary preparation; no console, network or show copy was operated for this candidate.
Official edition-specific documentationWhen a presenter stands near an LED screen, adding output alone does not define the useful lit area or the data path. This candidate organizes an Orbiter with Projection 35° from optic identification to a rehearsal worksheet. Distance, coverage and the camera result still need assessment on the actual system.
Official edition-specific documentationFor an interview or panel discussion, prepare lighting for both wide and close camera views. This guide uses Classic SkyPanel S60-C with Standard Diffusion to record coverage, power and control. A light specification alone determines neither the fixture count nor a completed rehearsal.
Official edition-specific documentationFor an interview in a small room, changing a modifier can change spill, shadow and useful light level. Preserve a system reference before compensating camera or intensity. This guide plans a STORM 80c/Light Dome 40 comparison and a documentary DMX route; it establishes no mounting, operation or camera result.
Official edition-specific documentationFor an interview near windows, first define the camera image and how ambient light changes during the intended time. This guide plans a STORM 1200x/BM7830 reference for directional or bounced light without promising to balance daylight from a watt figure. Power, control and rehearsal are documented separately.
Official edition-specific documentationWhen a fixture lacks CRMX reception, the wireless path must end at a device delivering the correct signal to its DMX input. This guide plans Sidus One reception with an identified adapter. It separates universe source, radio role and fixture personality; no equipment was linked or operated for this candidate.
Official edition-specific documentationMoving from ambience to an accent needs more than an end position: plan beam width, color, level and what remains visible during transition. This guide uses Robe LEDBeam 150 RGBW Mode 1 as a documentary reference. No fixture was moved or operated; the plan approves neither mounting nor image.
Official edition-specific documentationA show with the intended patch does not prove that the right port sends data to the stage. This guide separates parameter budget, physical routing and operator handover for grandMA3 light 4010502. Software references use grandMA3 2.5 documentation; no console, session or show copy was operated here.
Official edition-specific documentationA distant lighting position requires more than distance alone: record target size, performer path, camera, optical mode and ownership of each attribute. This guide plans an iFORTE LTX WB reference and distinguishes FS without establishing a complete followspot system or completed rehearsal.
Official edition-specific documentationA lighting plan may bring a network to the stage while requiring DMX for the final connection. Before planning distribution for a panel, runway or presentation, identify the LEDBeam 350 variant. The family name alone establishes neither available ports nor the console profile.
Official edition-specific documentationAt an event with an audience and a stream, hearing a source at the console does not establish what each destination receives. Trace each microphone or playback source from its connector to the room, monitors or stream. This guide uses full-size DM7 and separates mixing capacity, local connections and Dante transport.
Official edition-specific documentationTwo connected loudspeakers do not necessarily provide two independent mixes. For speech, playback and monitoring, define what the audience should hear and what the person on stage needs. This guide selects analog powered DZR15 and identifies the signal-path decisions to settle before choosing an output to another speaker.
Official edition-specific documentationOne person may send speech to a console while receiving a monitor mix, but those paths need separate assignments. For a presentation with production cues or a performance, this guide organizes Spectera components, links and channels without equating device discovery with audio delivery.
Official edition-specific documentationA room display, livestream and recorded file may need different content or formats. Before allocating outputs, state what each destination must receive and which tasks must run together. This guide prepares a V-80HD destination matrix without treating a 4K input as evidence of 4K program output.
Official edition-specific documentationA folding riser needs more information than its open footprint. For a presentation, awards area or performance, separate useful surface, height, storage position and transport route. This guide organizes FR-2403 documentary identification before finalizing layout and installation responsibilities.
Identified official documentsA riser inquiry may describe the finished surface while omitting its support system. For modular-stage planning, list supports, decks, braces and interfaces separately. This guide selects an ME-1000AS reference and compares AT where identification differs, without treating the ME-1000 name as a complete assembly.
Identified official documentsA program change may require a stage to be moved away and repositioned between sessions. For that inquiry, separate storage position, proposed travel route and final use condition. ME-3750 identifies a rolling support system; saying a stage has casters is insufficient. Decks, locators and supports need to match the documentation and complete event layout.
Identified official documentsAt a bilingual conference, counting receivers does not define the system: identify the original voice, interpreter and intended listening feed for each attendee. This guide maps that route for the standard DLT 400 and Standard Interpretation Mode in MAN 241N. Interpretation is performed by people; the equipment distributes audio without translating automatically.
Identified official documentsA conference room may need separate listening paths for the original voice and an interpretation. Begin with audio sources and listeners, then assign channels and receivers. This guide uses IR T2 and MAN 217G without treating infrared distribution as automatic translation or claiming proven listening at every seat.
Identified official documentsWhen a lighting proposal includes a wireless link, map the console signal and where it returns to wired DMX. This guide prepares that path for Wireless Solution Micro F-1 under the January 2019 G5 manual, second edition. Identify equipment and pending checks before rehearsal; a link indicator is no proof of verified lighting behavior.
Identified official documentsA line of fixtures may occupy the same space yet respond differently when the console profile does not match the selected mode. This guide separates mechanical identity, DMX footprint, channel functions and zone order for a stage, stand or conference. Pixel Line IP STROBE 3 IP with omega brackets is the selected documentary reference; actual unit and firmware remain unconfirmed.
Identified official documentsA five-head bar can offer per-head movement with shared color controls in the same mode. Before requesting programming, define which functions need independence and which may be common. This guide uses ACME Tornado TB 5 IP and 41 CH as a documentary reference without converting head count into a promise of full pixel control.
Identified official documentsFor standalone lighting preparation, connector count is insufficient: relate every fixture to its mode, profile, address and genuinely enabled universe. This guide scopes WMX1 MK2 review before creating a project or test. It separates power, MIDI and DMX input instead of treating all ports as equivalent outputs.
Identified official documentsDuring an operator change, a project file alone resolves neither power, peripherals nor the receiving controller’s settings. This guide separates project contents from records that need unit-specific verification. Prepare a useful handover matrix before connecting, importing or rehearsing the lighting system.
Identified official documentsA monitor feed needs a complete path: console mix, transmitter input, audio channel, RF link and the listener’s receiver. This guide provides a planning matrix for ADTD while separating audio from control networking. Use it to agree responsibilities and records before load-in.
Identified official documentsBefore handing over a monitor bodypack, define what the listener needs, which settings may change and how power will be documented. This guide prepares an ADXR handover by mapping mix to receiver, separating status indicators and providing a review sheet before rehearsal.
Identified official documentsA stage’s outside dimensions do not explain how decks and supports relate. This guide helps identify an ME-500 reference, map interfaces and collect the records needed by the assembly owner. Use the sheet to prepare a layout-and-components inquiry before installation.
Identified official documentsFor stage, video or technical-direction coordination, a beltpack needs defined send and return paths. This guide prepares a two-channel Model 370A matrix: who talks, who listens, where return audio comes from and which headset is intended. A network connection proves no configured production conversation.
Identified official documentsChoose the problem you want to solve. The guides help prepare the system; to hire equipment or services, tell us what your team supplies and which part you want us to handle.
| What you need | What to define | Where to continue |
|---|---|---|
| Send an already prepared canvas to LED | Actual source format, cabinet map and port capacity. Separate source processing from sending to receiving cards. | |
| Fit a presentation to another aspect ratio | Margins, cropping or custom content; compare the layer with the physical map before changing cabinets. | |
| Prepare the next composition before the cue | Define program, preview, screens and scenes. For RS4, separate Mixing/Split layer resources from physical connections; for NovaPro UHD, check its own composition and files. | |
| Identify NovaPro UHD Jr | Confirm the unit suffix and manual edition before using procedures from another variant. | |
| Choose a cabinet or receiving-card file | Model, revision, receiver platform, versions and file provenance. Compare V10/V2 tables before choosing NovaStar configuration or a Tessera fixture definition. | |
| Switch cameras and deliver program or editing sources | Finished program, isolated inputs, format, audio and who reviews and copies files. Separate HD ISO delivery from UHD program with external recording. | |
| Connect HDMI and SDI or change format | Actual input/output formats, scaler requirement, audio and final receiver. Identify MD-HX serial prefix before choosing the manual. | |
| Bring an SDI camera or program into a video call | Actual format, USB/computer, app camera and audio selections; listen from the receiving participant. | |
| Stream program and retain a copy | Encoder and HD format, platform, network, recording media, remote listening and failure the contingency must cover. | |
| Retain separate cameras and program for editing | Count every file; agree resolution/frame rate, per-channel audio, destinations and acceptance in editing. | |
| Record program or play prepared clips | Input, codec, media, output and receiver; when both tasks coincide, define separate paths and tests. | |
| Carry SDI over fiber between event locations | Source/destination, format, distance, T/R part numbers, fiber type, panels, power and complete-route test. | |
| Prepare shared rack reference | Separate content and reference; identify generator, groups, accepted format, reception and termination per device. | |
| Process sources and check picture, audio and timecode per destination | Exact model and mode, input/processor/output, audio map and required-data test. Use each FS2 or FS4 model’s own controls and connections. | |
| Prepare reference and LTC on a multicamera camera | Model/firmware, terminal function, reference, counter, video reception and clips checked separately. | |
| Prepare room, speaker return and streaming feeds | Define picture, audio and receivers per audience. V-1HD+ sends HDMI to a defined capture device or recorder; check V-160HD buses and USB separately. | |
| Distribute sources to displays and recorders | One row per source/destination, format and audio. Identify routes needing conversion and routes that change during the show. | |
| Match a source to the display format and framing | Source and receiver, cards, complete format, proportions, approved crop and tests with pattern and content. | |
| Coordinate slide advancement and backup | Who advances, expected command, file and position on each computer, videos and rehearsed recovery. | |
| Prepare spreadsheets and video readable from the back | Text/video samples, surface, image size, back row, light, actual unit and signal. | EB-L730U: native resolution, signal and readability LH730: 4LED, zoom and readability LU935ST: WUXGA, zoom and HDBaseT LU960UST: body, surface and HDBaseT ZU920T: motorized zoom and venue signal |
| Choose a lens and location for the projection surface | Image width/height, lens distance, mounting height, obstructions, support and lens reference to verify. | G62-W14: lens, signal path and venue rehearsal LH820ST: fixed short throw and placement LH850ST: fixed throw, focus and presenter TH671ST: zoom, lamp and presentation GT3500HDR: surface and UST presentation |
| Check image width and sharpness with a short-throw lens | Width, lens-to-screen distance, G62/lens reference, floating ring, test pattern and actual content. | |
| Show a loop and switch to an HDMI source | Independent pictures, files, live source, trigger, audio, network, power and agreed return. | |
| Schedule capture and verify session handover | Sessions, time zone, sources and files, accounts/platform, retention and who checks start, stop and copies. | |
| Prepare an LED panel for audiences and cameras | Label and revision, receiver, map, content, exposure and recorded test under intended conditions. | |
| Distribute Tessera data and validate the canvas | Source, map, frame rate, bit depth and per-output load. SX40 uses 10G trunks and XD distribution; S8 has its own 1G outputs. Identify hardware and revision before choosing topology and backup. | |
| Prepare an existing display with DVI input | Panel, receiver and retained project; source and format. For S4, prepare processing upstream of DVI; for T1, check the mode and its effect on scaling and output. Rehearse timing across all areas. | |
| Prepare PTZ shots and hand cameras to switching | Positions, presets and per-destination receivers. For UE160 against LED, distinguish moiré and bands and retain a sample; check each camera’s own modes, modules and power. | UE40: positions, presets and adaptation |
| Prepare a camera position with lens, return and tally | Compatible lens/functions, support, send, return and separate audio/communication; who operates and accepts each test. | |
| Add a fixed detail shot and retain its take | Position, lens, access and feed; camera file separate from program, audio and editing acceptance. | |
| Monitor a source and prepare its handoff file | Location, SDI/HDMI, video or supported RAW, media, audio, USB-C role and recipient test. | |
| Prepare an operated camera with lens and editing handoff | Shot, mount/lens, support/power; production feed and camera file with audio, operator and acceptance. | |
| Record UHD program or play fill/key graphics | Input, codec and recording media; ProRes 4444 and A/B for playback, with separate timing and responsibilities. | |
| Switch a compact SDI conference and deliver program/ISO | Up to four HD sources, two outputs, one USB-C, control, audio and an editing-tested handoff folder. | |
| Organize sources/destinations for an SDI ISO production | Eight HD inputs, four outputs and two USB-C ports: assign room, broadcast, monitoring and file roles with a joint test. |
You can enquire with an idea and complete models, dimensions and dates later. Documentary references do not confirm equipment availability.
Tell us what needs to be heard and what production supplies. The guides help prepare consoles and connections; request equipment, setup and operation before the patch is complete.
| What you need | What to define | Where to continue |
|---|---|---|
| Choose a console and I/O for the running order | Simultaneous sources, independent mixes, physical outputs and feeds for house, video or recording. | |
| Dante is connected but the channel has no signal | Network subscription, INPUT PATCH source, meter, bus and destination. Computer USB and storage PB are separate sources. | |
| Move microphones and returns closer to the stage | Console variant, sample rate, automatic/manual method and preamp owner. Test audio, HA control and returns separately. | |
| TF sees the rack but audio or preamp control is missing | Confirm TF1, installed NY64-D, exact rack, INPUT SELECT/SLOT and HA owner. Separate USB audio from show data. | |
| Prepare scene changes and operator handover | Patch, network permissions, shared preamps, rehearsal variant and settings to retain. Separate saving, recalling and loading files. | |
| Prepare conference programs and separate feeds | Speech, video, remote guests and recording: source and mix per destination, scenes and settings to preserve. | |
| Replace a rack or investigate startup mute | D3 model, console support, START UP, HA owner and two-way map; distinguish local monitoring from final feed. | |
| Prepare remote calls and recording with SQ-5 | Choose USB-B or SQ-Drive, a compatible recording path, bus/Tie Line/Direct Out tap and controls each feed follows. | |
| Prepare a wireless microphone with missing speech | Band and transmitter, RF versus link/audio, spare encryption and MIC/LINE output to the console. Follow the same voice to its destination. | Standard EM 2: RF and analog output EM 4 Dante: RF, audio and control EW-D 835-S: speech, SYNC and mute ULXD4Q: separate or summed voices |
| Share microphones with defined preamp responsibilities | Choose digital sharing or source splitting, direct/isolated destinations, phantom owner and what remains if a console leaves. | |
| Connect music or videos while keeping both sides | Actual source output, L/R adaptation, mic inputs, stereo/mono mix and level operator. | |
| Run four analog signals between areas | Both-end modules, dedicated cable, channels, phantom and isolation needs; compare digital I/O where relevant. | |
| Prepare speech and music for a room or ceremony | Sources, audience, positions, inputs, power and waiting time; distinguish another speaker’s shared program from an independent mix. | EON ONE MK2: battery and preparation NX 932-A: speech, music and signal path NXL 24-A MK2: speech and distribution HDL 6-A: array or distribution |
| Prepare PA, monitoring and bass extension | Sources and destination mixes, Thru/Mix Out, each device’s filters and speech/music program; complete system placement and testing. | KS118: subwoofer and signal pass-through SUB 8004-AS: outputs and filtering K10.2: audience and monitoring |
| Prepare conversation between room and remote participants | Pickup, application interface, loudspeaker return and AEC reference; agree supply responsibilities and check both listening paths. | |
| Prepare a moderated discussion table | Station layout, roles, speech requests, listening and outputs; distinguish installed stations from open interventions and agree operation and rehearsal. | MXCW640: roles, turns and listening |
| Prepare interpreting and language feeds | Source and target languages, interpreters and booths, floor listening, outgoing language and distribution to audience, remote guests or recording. | |
| Coordinate microphones and in-ears from several suppliers | Models, bands, zones, overlapping schedules and change owner. Separate scanning, calculated plan, deployment and rehearsal. | |
| Prepare each performer’s monitor mixes | Console mixes, transmitter, P10R+ receiver, Stereo/MixMode and agreed controls before handover. | |
| Record a panel while keeping voices separate | Simultaneous voices, per-person tracks, camera mix, Audio Summing, inputs and who controls each feed. | |
| Prepare the venue’s passive speakers | Identify speakers, amplifier, loads, cabling and mixes; prepare INPUT/SPEAKERS paths and the person responsible for testing. | |
| Integrate the event with installed zoned sound | Identify sources, amplifier, processor and destinations with venue staff; prepare feeds and listening checks per zone. |
Start with the goal and complete models, patch and schedules with our team. Guide models are technical references; the proposal identifies the system and tasks for your event.
Enquire before you know models or profiles. Describe what should be visible, program changes and venue resources; use that starting point to define equipment and scope.
| What you need | What to define | Where to continue |
|---|---|---|
| Light walls or a stand with battery fixtures | Surfaces, color, setup/test/event time, charging and control source. Distinguish original AX5 from BTB. | |
| Prepare color, white and movement accents | SKU and firmware, profile and patch, agreed cues, cameras and programming/operation responsibilities. | |
| Prepare console and operator handover | Showfile, software version, outputs and responsibilities. Match the fixture profile to the actual patch. | |
| Include visible practical lamps in the cues | Fixture/label photo, FP7 variant, voltage and base, continuous power, script and interruption/return test. | |
| Highlight a product separately from wall washing | Object, material, ambient light, throw and diffuser; complete battery use and external bridge for AX3-CRMX. Compare accent and wall tasks separately. |
Models are technical references. The proposal identifies equipment and accessories that can be prepared, plus the setup, programming or operation you choose to contract.
Calculate using your cabinet data and the number of columns and rows. This tool calculates geometry and pixel counts; controller selection, loads, structure and compatibility require the specifications and actual system.
Use the cabinet’s stated pixel dimensions; do not derive them from rounded pitch. Nominal result for complete rectangular cabinets, without margins, curves or partial panels. No price, power, weight or availability calculation.
Enquire about equipment and servicesTools to complete
Use these files to gather information before enquiring or for rehearsal. Complete what is available and identify the open items.
Downloading or copying these files does not send an enquiry. Save your copy and, when you want to enquire, paste a summary into the Contact message.
Organise your goal, services, responsible people and available details to request a proposal. Use the optional template and identify decisions still to be made.
Prepare my enquiry brief ↗02 · Choose for the way it will be usedCompare rental, purchase and integration around the audience, content and space. Review pixel pitch, dimensions and operation to choose which equipment and services to quote, even without a model selected.
Compare LED rental and purchase ↗03 · A guide for creative teamsOrganise the pixel map, files, audio, versions and tests with your creative and technical team. Choose playback preparation, operation or help from the idea stage, with format and system agreed for the project.
Prepare files and playback ↗04 · From a creative idea to installationIntegrate LED with the stand design and visitor route, with coordinated content and responsibilities. Compare integration with installation, operation during the exhibition or guidance, and enquire from an idea or render.
Plan LED for my stand ↗05 · One running order for every teamPrepare one running order and rehearse speech, visuals, lighting and transitions. Choose sound, lighting or technical coordination; use the voice rehearsal worksheet to record checks and open items.
Coordinate equipment and operation ↗06 · A guide for the technical rehearsalFollow the signal from its source to the screen or intended destination. Organise stage-by-stage tests for LED screens, cameras and playback, record what was checked and agree fallback arrangements with the people responsible.
Check the signal before the event ↗Eventos Globales
Tell us what you want to achieve, whether you need to rent equipment, buy an LED screen or add technical services, and what your team already provides. Start with the idea and add dates, venue, dimensions or references later.
In Contact, you can choose or correct the service and remove the Resources reference. We use the available details to prepare equipment and service options and agree what remains to be defined for your proposal.