info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

← Back to guides and resources

Reference documentation · Sound

Shure AD4Q: simultaneous voices, coverage and outputs

Compare four voices in normal mode with two in Quadversity and prepare antennas, control and output format.

These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.

Prepare voices for your event

Tell us the city, date, speakers and their movements. Eventos Globales can prepare a sound equipment rental, purchase and integration proposal, preparation and operation in Argentina. Start with the program and your team’s resources; complete models and connections during preparation.

Choose simultaneous voices and movement areas

For a panel or show spanning several areas, map voices, movement and feeds before choosing receiver mode. Assess equipment, RF coordination, antennas and distribution, analog or digital cabling, and stage and console operation. Identify each participant’s tasks and resources in the proposal.

Compare channels and outputs before building the system

Compare channels and outputs before building the system
ReceiverVoices and modeOutput to identify
AD4DTwo receiver channels; identify transmitters and changeovers per channel.Analog XLR, dedicated AES3 or Dante for the destination.
AD4QFour channels in normal mode; two audio channels in Quadversity.AES3 on Output 3/4 changes XLR 1/2 use; check format and patch.

Model and application

Receiver
AD4Q
Normal operation
4 channels
Quadversity
2 audio channels
Outputs
Analog / AES3 / Dante
Management
Wireless Workbench

Identify RF hardware, selected band and transmitter family before pairing.

Plan several wireless microphones for a conference

Separate participants, microphones that must operate simultaneously, and spare equipment. To assess an AD4Q package, identify receiver hardware and band, compatible transmitters with their bands and versions, capsules or microphones, and intended batteries or chargers. Antennas, distribution, and RF cabling must be reviewed for the locations and route; choosing the receiver does not confirm them. The coordinated plan and authorized operating conditions at the venue remain subject to verification.

Define each signal delivery: analog output to a suitable console input, AES3 to a compatible destination, or Dante through the documented network mode and patch. Choose and verify the format before connecting; matching connectors do not establish matching signal types. For local monitoring, the manual supports headphone listening to the selected channel. That listening check, Wireless Workbench supervision, and actual arrival at the destination are separate checks.

Agree on who coordinates RF and who monitors levels, batteries, and channels during the event, and which preparation and rehearsal to consider in the proposal. If this level of supervision is unnecessary, another package suited to the use can be evaluated. Do not turn a participant count into guaranteed available channels, range, or frequencies.

There are several voices and a roaming presenter: what should the wireless proposal include?

For your event in Argentina, start with simultaneous voices and movement areas. Eventos Globales can prepare an equipment proposal, console integration, RF coordination, antennas, rehearsal and operation for your production resources. Include who handles microphone changeovers and verifies room, remote and recording feeds.

  • Initial option: Planned operating channels with identified transmitters and audio delivery.
  • Expand the scope: Assess antenna distribution, RF coordination, walk testing, changeovers, and operation.
  • Another alternative: A wired microphone for a fixed position or an independent backup where appropriate.

To get started: How many people will speak simultaneously, and where will they move?

Connections and required equipment

RF reception, Shure control and Dante audio are separate paths. Read the selected network mode before choosing ports.

Prepare the system

  1. Record versions, channel mode and antenna arrangement.
  2. Use the coordinated RF plan and matching transmitter band.
  3. Test one channel and the intended output at controlled level.

Questions and troubleshooting

A transmitter will not sync or shows Encryption Mismatch. What should we identify before the show?

Start with identity and the exact error. Confirm band, transmitter model and compatible versions. Select the receiver channel and align IR windows for SYNC; retain registration and encryption policy. A successful sync still needs RF and audio verification on the selected channel. If compatible identified units repeatedly fail, save the exact error and both versions for Shure support; do not disable registration or encryption to make the error disappear. Compare the failing transmitter with a working compatible one while keeping the channel identified. Other microphones syncing does not establish this transmitter’s band or registration; do not turn one error into a failed-receiver diagnosis.

If Encryption Mismatch appears, distinguish transmitter registration and keying from a family or band incompatibility. The manual states that changing encryption state or key requires IR synchronization and that encryption applies to all receiver channels; do not improvise that change to recover one voice during the event. A matching band does not establish cross-family compatibility. Send receiver/transmitter labels and the exact message, without keys or credentials. We can assess preparation of a compatible package, a verified replacement transmitter, or an alternative complete system; the proposal will identify synchronization, coordination, and audio checks while retaining the agreed policy.

We need four voices and more coverage: what changes when choosing Quadversity on AD4Q?

Quadversity uses four antenna inputs and leaves two audio channels. Its cascade ports become antenna inputs: review the RF distribution planned for other receivers instead of assuming the usual cascade remains available. Enabling it requires a reboot; prepare changes out of service. Frequency Diversity is a different function: it uses two frequencies for one audio signal with compatible transmitters. Neither option creates more simultaneous voices.

For a quote, separate simultaneous voices, movement areas and reception mode. We can compare four voices in normal mode with suitable RF distribution, more receivers if Quadversity must be retained or another coverage design. The proposal should identify transmitters, coordinated bands, antennas and distribution, receiver outputs and console inputs, preparation and operation. Send performer counts and routes even with a provisional plan. The proposed rehearsal checks every voice, RF and audio through to its destinations along the actual route; antenna count does not guarantee range. If the system is in use, record its mode and arrange agreed continuity before scheduling changes.

Why is control online but Dante silent?

Control visibility does not confirm audio routing.

  1. Read switched versus split/redundant mode and trace the selected ports.
  2. Check subscription, rate/clock and console input patch; compare receiver audio metering.
  3. If receiver audio meters respond but the subscribed console input does not, compare the network/audio patch rather than resyncing the microphone. Verify the same source through bus and destination after correction; persistent clock/subscription errors require the network operator’s review.
The presenter moves between areas: what is needed for AD4Q coverage and remote transmitter control?

List simultaneous voices, walking routes, and other wireless systems before choosing antenna layout and receiver mode. Quadversity changes available audio resources as explained above; do not enable it mid-show to try to fix a dropout. Walk-test the intended layout and observe RF and audio at required points. If coverage is insufficient, assess antenna relocation, compatible distribution, or another microphone solution. We can include RF coordination, accessories, and operation in the proposal.

Separate the requirements: hands-free use, mouth distance, clothing, and microphone placement, alongside the RF route. Better antenna placement does not correct a poorly positioned lavalier or an unsuitable room mix. We can compare handheld, bodypack with a suitable microphone, or wired options for fixed positions, according to the format and compatible equipment. For replacement, define who hands it over, how it is identified at the console, and where it is checked without interrupting the program; a stored spare is not a ready audio path. Send simultaneous voices, positions, changes, and venue resources even before the final plan. We quote equipment, antennas/distribution when needed, preparation, stage assistance, and operation subject to verification and availability.

If remote transmitter adjustment is also required, specify it as a separate system requirement. Shure documents AD610 for ShowLink control of enabled transmitters, including ADX; an AD4Q or a receiver visible on a computer does not confirm that this control is ready. We can compare local settings before handover, stage assistance or compatible transmitters with a configured access point and remote control. For a quote, send transmitter models, bands, versions, movement route and the changes the operator needs to make. Identify accessories, power, network and responsibilities, and test the required functions and voice through to its destination. Check control coverage separately from audio reception; adding an accessory does not guarantee continuity.

Which analog or digital feed and backup should we quote for the show?

Choose for the system’s inputs and network: AD4Q documents analog, AES3, and Dante outputs. Prepare formats, levels, and patch before the show; a control connection alone does not deliver audio. A prepared and rehearsed alternate output path could cover a downstream fault, but shares the receiver, power, and RF link. To cover microphone loss, also assess an independent spare microphone. We can compare analog cabling, digital integration, and backup with a defined scope. For a very quiet or distorted analog feed, compare the receiver mic/line setting with the destination input and its meters. If receiver RF and audio remain stable, do not attribute that symptom to a bad frequency without tracing the path. We can assess a compatible analog feed before adding a digital network.

Write down the failure to cover: RF link, transmitter, receiver, or path to the console. Two outputs from one receiver do not create two independent wireless systems. Also confirm AES3 mode and each destination’s format, as covered in the XLR-output question; do not assume all connectors simultaneously deliver analog audio. We can compare a simple feed, an alternative path after the receiver, or a compatible spare microphone with a rehearsed handoff. If Frequency Diversity is considered, the manual describes two frequencies for one audio signal with compatible transmitters: that is not two voices and does not replace all other backups. Send destinations, connections, essential voices, and handoff responsibilities to scope rental/purchase, cabling, and operation subject to design and availability.

Can one artist alternate between handheld and bodypack without adding another simultaneous voice?

A changeover between compatible registered transmitters can be assessed after checking band and versions. Transmitter slots store associations; they do not turn one receiver channel into several simultaneous voices. Do not switch on two transmitters on the same RF assignment to mix them.

Prepare and rehearse a handoff, activation, and mute sequence that retains protections. If both microphones must be heard together, assess independently coordinated channels. We can quote either approach with the handheld capsule or bodypack microphone, changeover preparation, and operation appropriate to the use.

I can see AD4Q in Wireless Workbench. Can I already control the transmitter remotely during the show?

Seeing the receiver is not enough. ShowLink control requires compatible ADX transmitters and a ShowLink access point such as AD610; receiving audio from an AD does not add that function. Confirm models and verify the control indicator as well as RF and audio. If control disappears, record which link is missing before changing settings; do not test software updates during the show. We can compare a rehearsed remote-control package or transmitters without ShowLink with stage assistance. Tell us which adjustments you need and where the artist will move; accessories and operation are quoted subject to compatibility and availability.

AD4Q reports RF overload. Should I raise power to ensure coverage?

No: RF overload and missing signal require different checks. Record the exact alert and review nearby transmitters, active antennas, and distribution gain with the RF coordinator. The manual includes reducing power or gain and increasing separation as appropriate; do not reflexively add antenna amplification. Rehearse the artist’s paths after any adjustment to verify coverage and audio. If the alert persists, preserve versions and topology for support. We can quote RF review, repositioning or compatible distribution, and an agreed backup; include the in-ear systems and radios sharing the stage.

Many microphones and band changeovers: will separate scans or enabling HD solve the whole system?

Do not consider the whole system coordinated from isolated tests. Collect microphone and in-ear models, bands, and transmitters, including host equipment and units switched on while the next act prepares. Prepare an environment-compatible plan and rehearse the actual overlaps too. A backup frequency needs coordination; it is not any apparently empty frequency. We can quote RF coordination, transmitter power-on management, and stage operation, or assess microphone alternatives if the package does not fit. Send the venue, provisional running order, and known equipment.

First distinguish insufficient spectrum for simultaneous voices from coverage of a long route: these are different problems. Shure positions High Density for many channels in a confined area over short distances; it is not a universal range upgrade. The applicable mode also depends on region and actual equipment. To quote, send the location, receiver/transmitter bands, simultaneous voices, movement areas, and wireless systems overlapping between acts. We can compare coordinated operation in a supported mode, appropriate RF distribution, additional receivers when resources are insufficient, or different microphones for fixed positions. Prepare the choice before the event and verify it with all planned equipment; do not switch modes during the show to try to cure dropouts.

The AD4Q tone reaches the console, but speech does not: what does that test prove?

The tone checks the output path, not the microphone or RF. It enters before system gain, which affects its level.

Schedule this test outside the show with destinations protected; switch the generator off before testing the microphone again. Then compare speech at the receiver and the same console input. We can assess routing/level checks, replacement microphones, or operation according to where signal is lost; that symptom alone does not require replacing the entire system.

Enabling AES3 on AD4Q silences XLR 1 and 2: has reception failed?

With AES3 enabled, Output 3/4 carry digital signals and XLR 1/2 are disabled. Check that state before attributing silence to RF.

For the show, identify which output feeds each console input and which format the destination accepts. An XLR cable does not convert AES3 to analog audio. We can compare analog delivery, AES3 into a compatible input, or a documented interface if required; connectors alone do not establish ready-to-use paths. During rehearsal with protected destinations, check every voice through the chosen path, received format, and agreed recovery. Tell us which console or recorder is planned, even with only a model or photos: the proposal can include suitable cabling, preparation, and verification. Do not change mode during the panel to try another delivery.

Choose the next check

Choose the next check
ObservationNext checkWhat to record
Sync errorBand, IR and versionsExact message
Channel count changeOperating modeQuadversity/diversity
Control without audioNetwork mode and patchPorts, subscription, clock

Precautions

  • Use authorized frequencies and a coordinated antenna plan.
  • Do not join primary and secondary networks or change modes during operation.
  • Do not bypass registration, encryption or protection to test a forum suggestion.

Match Quadversity and AES3 to the required voices

AD4Q manual v11.1 (2026-J) describes four channels in normal operation and two audio channels in Quadversity. Cascade ports become additional antenna inputs and enabling the mode requires a reboot. With AES3 enabled, Output 3/4 carry digital audio and XLR 1/2 are disabled. Prepare and rehearse mode, voices and destination inputs before the program.

Choose equipment, preparation and operation

Why start with simultaneous voices rather than participant count?

One person may alternate microphones and several may share turns. List overlaps and movement areas to compare normal mode, another system or additional reception when required, with defined preparation and operation.

What should we request for the room, recording and remote participants?

Describe what each destination needs and whether voices must be separate or already mixed. Assess console, connections, a remote mix excluding its own return, and operation. Identify received format, owner and checks for each destination.

Tell us who speaks and what each destination needs

Start with city, date, simultaneous voices, movement and production resources. Request equipment, preparation, integration and operation. Contact arrives with Sound selected; mention AD4D or AD4Q in the message if relevant. Mark undecided models or destinations and review before sending.

Record the test of each voice

Reuse the optional speech rehearsal worksheet: speaker, positions, movement, destinations, result and owner. Add model, band and mode to the technical map prepared by each team.

Download speech rehearsal worksheet (TXT)

Compare reception and continue to the console

Model documentation and reference edition

Official AD4Q manual v11.1 (2026-J),49 pages,in English. Channels, Quadversity, diversity, AES3, network and troubleshooting sections. AD610 is documented as a ShowLink control component for enabled transmitters.

Documentation consulted

Checked October30,2026: official manual sections compared by model. Complete preparation through actual units, bands, versions and event feed tests.

Let’s prepare your event system

Tell us what you want to show, hear or light and what your production already provides. Start with the idea and add models, dimensions and schedules later. Mention the model or guide in your message; the related service is selected in Contact.

Enquire about equipment and servicesView the related serviceEvent preparation guide