info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

← Back to guides and resources

Reference documentation · Lighting

ARRI Orbiter with Projection 35°: plan shutter cuts, focus and control

When a presenter stands near an LED screen, adding output alone does not define the useful lit area or the data path. This candidate organizes an Orbiter with Projection 35° from optic identification to a rehearsal worksheet. Distance, coverage and the camera result still need assessment on the actual system.

These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.

Model and documentation reference

Documented reference: ARRI Orbiter Blue/Silver body L1.0033520 with Projection 35° optic L2.0033550 using QLM. This combination illustrates a shutter-cut task and establishes no Argentine availability. The official page distinguishes four manual shutter blades from motorized focus. A 35° angle identifies neither a zoom range nor installed LiOS.

ARRI Projection 25° / 35° · L2.0033549 / L2.0033550

Event application

For a presentation, play or recording in Argentina, draw the presenter position, screen boundary, people paths and cameras. Identify the surface that needs light and the area to keep clear. Record distances and framing before selecting optics: a wider source may spill into unwanted areas, while a narrower one may need another position. Include scene changes and operator access to focus in the plan.

ARRI Orbiter · brochure L04142 / 80.0033512 · PDF 4,16 · ARRI Projection 25° / 35° · L2.0033549 / L2.0033550

Select optics by task

Select optics by task
Orbiter referenceDocumented functionPlanning consequence
Projection 35° · L2.0033550Four manual blades and motorized focusPlan access for shutter cuts; focus and shutters differ
Projection 25° · L2.0033549A separate projection optic with a different angleReassess position and coverage before substitution
Fresnel 15–65°Motorized zoom rangeDo not assign that zoom to Projection 35°
Open Face 15°, 30° or 60°Directional beam from the selected opticA similar body does not establish projection shutters

ARRI Orbiter · brochure L04142 / 80.0033512 · PDF 4,16 · ARRI Projection 25° / 35° · L2.0033549 / L2.0033550

Separate signal, power and personality

The brochure identifies five-pin DMX input/through, Ethernet input/through and Art-Net/sACN control options. The three-pin battery connection is a different interface; connector appearance is no reason to treat it as DMX input. Prepare a row linking console, intended protocol, universe, start address and exact Orbiter personality. No channel map or count is assigned here: the permitted operating manual and actual unit version/mode are missing. Two Ethernet connections also establish no redundancy.

ARRI Orbiter · brochure L04142 / 80.0033512 · PDF 4,16 · ARRI Projection 25° / 35° · L2.0033549 / L2.0033550

Plan a lighting comparison without claiming a rehearsal

Keep brochure L04142 and the dedicated Projection page as references. The page links optic recognition to LiOS 2, which does not establish an actual unit version. Request the body, optic and LiOS record before finalizing control. For a later test, agree on camera framing/exposure, a screen scene, low-level output and a transition. Do not copy a SkyPanel personality or promise that matching console values will match different light sources.

ARRI Projection 25° / 35° · L2.0033549 / L2.0033550 · ARRI Orbiter · official FAQ · model-specific scope

Prepare the rehearsal worksheet

  1. Record body L1.0033520, optic L2.0033550 and the actual intended components. Leave serial, LiOS, support and accessories pending without evidence; a documented reference is no inventory.
  2. Mark useful area, surfaces to protect, distances, camera positions and people paths. Separate manual shutter adjustment from focus control. This guide performs no mounting.
  3. Prepare the documentary console–protocol–universe–address–personality–fixture route. Leave channel count open until permitted documentation and actual mode are available.
  4. Define comparable observations: presenter with screen, edge cuts and scene transition. Record camera configuration and each observation goal without calling the test completed.
  5. Assign a documentation, mounting and rehearsal owner/window. Preserve initial state and open decisions; this package changes no network, personality, LiOS or firmware.

ARRI Orbiter · brochure L04142 / 80.0033512 · PDF 4,16 · ARRI Projection 25° / 35° · L2.0033549 / L2.0033550

Frequently asked questions

Does remote focus also move the shutters?

The Projection reference describes motorized focus and four manual blades. Plan access to shutter cuts separately from focus control.

Does Projection 35° have 15–65° zoom?

That range belongs to Orbiter Fresnel. Projection identifies separate 25° and 35° optics; do not transfer a range between accessories.

Which DMX channels should I patch?

No permitted channel table is included here. Identify exact version/personality and obtain authorized documentation before defining address and universe occupancy.

Can I use a SkyPanel personality because both are ARRI?

Do not assume so. Manufacturer identity establishes no common personality; record each source model/mode and verify its exact documentation.

Does this sheet prove a good presenter and screen camera image?

No. The result depends on the system, positions, levels and camera. The sheet prepares rehearsal observations; it approves neither image nor mounting.

Follow the lighting control path

    Download Orbiter optics, control and rehearsal worksheet

    Official edition-specific documentation

    Orbiter brochure L04142 / 80.0033512: existing 19-position PDF, positions 1–10 and 16–19 read; 4 and 16 visually inspected. Its imprint says published February 2025 and retains a separate 02/2024 mark. Official Projection, Optics and FAQ page text consulted. Operating manual L03917 is held and excluded, neither read nor materialized for this candidate. The brochure links to its official origin without a new copy or tested local reader.

    Plan lighting for your event

    For event-lighting planning in Argentina, share city, space, presenter/screen locations, cameras, distances and known equipment references. State whether the priority is shutter cuts, softness or coverage. Final selection, availability and rehearsal require confirmation.

    Enquire about equipment and servicesView the related serviceEvent preparation guide