Preparing displays for conferences, stands and stages
Start with the content, display surfaces and who supplies each part of the system. A plan, label photos and the existing configuration help frame a video and display enquiry. Technical details help define the preparation, rehearsal and operation your project needs.
Model and application
MX20 combines LED processing and control in COEX with VMP. Documentation reference V1.5.0; check the event’s actual controller, software, and receiving-card versions. It is not equivalent to VX1000 or MX40 Pro.
Signal and optics
- Signal
- Two HDMI 1.3 and one 3G-SDI input with loop connections. Separate input format, canvas, and cabinet resolution.
- Output
- 6 Gigabit ports and two 10G optical ports; maximum total loading 3.9 million pixels, subject to mode and distribution. The second optical port is a copy, not additional capacity.
System preparation
- Collect panel model, cabinet resolution, receiving cards and versions, quantity, and wiring sketch.
- Keep original project/configuration and calibration data. Obtain the applicable cabinet file from its supplier; do not test another panel’s files.
- Check MX20 and VMP compatibility documentation; calculate port loading using actual frame rate, bit depth, and receiving cards.
- Prepare source and canvas; map off-show and check an internal pattern before content. Rehearse presets and recovery without an audience.
Does maximum loading apply at every frame rate and bit depth?
No. Port capacity depends on frame rate, bits, load width, and receiving-card model. Review the exact table and physical distribution rather than copying another processor’s cabinet count per port.
Do I need another scaler for a different screen aspect ratio?
All-In-One mode provides layers and scaling; Send-Only has a different scope. Compare content, crop, and readability with a sample. Assess external equipment when it adds show-required destinations or transitions, rather than automatically.
What if cabinets appear in the wrong order?
Compare physical wiring and mapping using an internal pattern and port/card identification. Separate position errors from signal problems. Save a working state before sending configuration and avoid live changes.
Can NovaLCT replace VMP, or can any previous file be loaded?
Prepare the COEX configuration with VMP and files matched to the cabinet. Identify receiving card and version, retain original calibration and check the manuals for the functions supported by that combination before importing RCFGX or NCP.
Checks by symptom
| Cabinets out of order | Internal pattern, topology, and mapping. |
|---|---|
| Correct pattern, missing content | Input, source status, mode, and layers in VMP. |
Use and safety
Do not send cabinet files or update firmware without a backup and exact match. Rehearse restoration off-show.
Keep the controller dry, ventilated, and correctly powered. This control guide does not size panel rigging or power distribution.
Preparing the enquiry and test
Gather what is available: event purpose and city, cabinet plan, video source, models and versions. The date or equipment may still be undecided. Identify who retains the originals and authorises changes. Agree a test unit and window, acceptance criteria and recovery procedure before making changes.
Editable identification and test worksheet
Continue with your system controller or files
Manuals and editions
Check the stated model, edition and language at the manufacturer’s source. Verify the document edition and installed software version separately.
MX20 · Specifications V1.5.0
Open official documentation ↗MX20 · User Manual V1.5.0
Open official documentation ↗
Documentation consulted
Document adaptation: October 29, 2026. Check your system model and version before applying changes.
