Equipment and operation for your event feeds
Tell us what the audience needs to hear and what stage, remote call and recording receive. Request sound equipment, setup, preparation and operation from Eventos Globales for conferences, presentations and shows in Argentina. Start with the running order and what the venue or production supplies; complete models, connections and schedules later.
Prepare room speech and playback
Tell us the room layout, audience positions and source count. Request sound, cabling, preparation and operation from Eventos Globales; compare a direct connection with a console when the program needs more inputs or different feeds. The plan and running order can be provisional.
Model and connections
EON712 offers two combo inputs, an XLR mix output and Bluetooth playback. JBL Pro Connect control and audio pairing are separate functions. Confirm each source’s power needs and actual output.
Prepare and check
Note the sources, inputs in use, overall level and settings. Check speech from several seats, including the pauses. If speech is unclear at the back, review speaker placement or sound distribution before turning up the whole system.
Questions and decisions
Can I connect a microphone and laptop without a mixer?
It may work if compatible inputs and available control cover the program. At low levels, test each source separately, balance speech and playback, then check transitions. For more microphones, monitor mixes or independent recording, assess an external mixer. A connector adapter does not guarantee a suitable signal.
Is Bluetooth suitable for conference video playback?
Prepare a wired connection first and test the video you will use, checking speech and picture synchronization through the complete system. If they are out of sync, compare wired and Bluetooth connections using the same file and video output. Check the player and display as well: latency needs to be assessed in that setup. Have an alternative ready before the audience arrives.
Choose inputs and feeds before adding speakers
A second speaker receiving the same program does not create a separate stage or recording mix. Define each destination and its level operator. For the room, assess audience positions, speaker placement, presenter movement and cabling before choosing equipment quantities.
Decisions for preparing the event
The first EON712 plays but the second does not. Where should I start?
Follow Pass Thru/Mix Out, the balanced XLR cable and the second unit’s line input. HARMAN documents Mix Out and its level in the EON700 menu. Check that feed at protected levels using the actual program; hearing the first speaker does not validate the next destination.
Is audience count enough to choose the speakers?
Include audience layout, dimensions, indoor/outdoor location, presenter position, program and listening zones. Use these to prepare equipment, setup and operation. Complete the selection with placement and listening checks; a power figure alone does not define the room result.
Prepare the proposal and operator handover
Share city, date, running order and approximate source count. Identify venue-supplied items and tasks to delegate: equipment, setup, configuration, rehearsal or operation. Leave unknowns undecided. The worksheet is optional; downloading or completing it does not send an enquiry.
The voice rehearsal worksheet is optional. Record positions and destinations; add your program’s wait, power and playback. Downloading or completing it does not send an enquiry.
Continue with the source and system alternative
Official references for these checks
HARMAN support articles on mic level and EON700 Pass Thru/Mix Out. Compare actual EON712 controls and version before changing settings.
Documentation consulted
Document review: October 30, 2026. Official model-specific references and editions; no equipment changes or inventory verification performed.
