info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

← Back to guides and resources

Reference documentation · Event planning

StageRight FR-2403: identify part number, height and surface before planning

A folding riser needs more information than its open footprint. For a presentation, awards area or performance, separate useful surface, height, storage position and transport route. This guide organizes FR-2403 documentary identification before finalizing layout and installation responsibilities.

These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.

Model and documentation reference

Selected documentary reference: FR-2403 part 305305, identified in the manufacturer table as 4 × 8ft with 16–24in dual height. The actual system may have another code and needs confirmation. FR-2403 uses PolyTrac/carpet, FR-2404 uses TechStage/carpet and FR-2402 has its own table column. Neither historical sheet nor FR-Series packet establishes an Argentine unit’s dimensions, finish, condition or availability.

StageRight FR-Series · packet EN · filename20161209 · revision date unconfirmed

Event application

For an event in Argentina, draw the intended area, access, presenter position, planned equipment and circulation. Record doors, elevators, turns and storage separately; open footprint alone describes no transport envelope. Name the reviewer for receiving floor, proposed assembly and required access/protection elements. A surface desired in the design must still match actual code, components and condition.

StageRight FR-Series · packet EN · filename20161209 · revision date unconfirmed

Four records to reconcile before confirming a proposal

Four records to reconcile before confirming a proposal
RecordManufacturer referenceProject check
Selected code305305:4 × 8ft FR-2403Identify each actual unit and assembly match
Height16–24in for this dual-height referenceIntended height and actual variant; distinct from fixed height
SurfaceFR-2403 PolyTrac/carpet; FR-2404 TechStage/carpetRequired face, actual finish and condition pending review
System stateOpen use and transport/storage are different positionsRoute, storage, fasteners and responsible review

StageRight FR-Series · packet EN · filename20161209 · revision date unconfirmed

A multi-section plan needs identified connections

The packet documents section fasteners and connections; adjacent rectangles on a drawing establish no assembly. Record units, orientation, height and intended interfaces for the responsible reviewer. E-Z clips and multilevel connections have specific manufacturer instructions and are not assumed interchangeable with another system’s accessories. Casters establish no permission for occupied or equipment-loaded movement.

StageRight FR-Series · packet EN · filename20161209 · revision date unconfirmed

Folding, height selection and deck reversal are separate tasks

Dual-height adjustment is documented in transport/storage position, with adjustable legs and center supports at matching positions before use. Reversing an FR-2403 deck face is a separate fastened-deck operation, not unfolding. The manual requires properly engaged fasteners and correctly positioned decks. This candidate organizes review against complete instructions; it replaces no inspection and approves no installation, load capacity or rehearsal.

StageRight FR-Series · packet EN · filename20161209 · revision date unconfirmed

Prepare records without moving or adjusting the riser

  1. Collect actual identification, part numbers and authorized assembly photos. Compare units with the FR-2403 column and retain unmatched parts as pending.
  2. Record required area/height, intended deck face and items planned on the platform. Infer no usable capacity from caster count or marketing wording.
  3. Draw units, orientation and interfaces. Separate open surface, storage envelope and access route; actual dimensions await verification.
  4. Assign receiving-floor, component, fastener, access and protection review to the competent owner. Identify which instructions concern folding, height or deck reversal.
  5. Preserve pending items, owners and inspection/rehearsal window. Perform no unfolding, height changes, deck reversal, lock adjustment or loaded movement to fill this sheet.

StageRight FR-Series · packet EN · filename20161209 · revision date unconfirmed

Frequently asked questions

Does every FR-2403 have 16–24in height?

No. That describes selected part 305305. Other codes/heights exist; identify the actual unit.

Do FR-2403 and FR-2404 have the same surface?

The manufacturer distinguishes PolyTrac for FR-2403 and TechStage for FR-2404, with carpet on the other face. Actual offered-unit finish needs identification.

Is changing height the same as unfolding?

No. Dual-height adjustment is documented in transport/storage position with matching legs/supports, separately from folding.

Does reversing the deck mean simply turning the riser over?

No. The packet treats it as a separate fastened-deck operation. Review complete instructions and actual assembly.

Do a sheet or robust casters establish installation approval?

No. Part number, configuration, condition, supports, receiving surface and intended use require specific review. This guide grants no structural/transport approval.

Continue the layout and brief

Download the FR-2403 reference, layout and pending-item worksheet

Identified official documents

Two existing official originals SHA verified: historical FR-2403/2404 sheet 7378 and FR-Series packet with filename ending 20161209. Filename, footer marks and metadata alone establish no revision date. All 2/11-page text read; sheet PDF 2 and packet PDF 3/5/6/7 visually inspected. Remaining diagrams are not claimed visually reviewed. Consult the document applicable to the actual code below.

Plan the stage for your event

For a riser/stage in Argentina, share city, venue, use, desired area/height, circulation and planned equipment. If FR-2403 is identified, add part numbers and documentation. The inquiry scopes review and proposed installation; configuration, availability and service scope need confirmation.

Enquire about equipment and servicesView the related serviceEvent preparation guide