Model and documentation reference
ADXR is the Axient Digital PSM bodypack receiver for IEM and IFB; ADTD and ADTQ are transmitters. References are English ADPSM User Guide 2.2 (2026-E) and the ADXR product sheet ©2024. The documentary scenario uses ADXR with SB910; the manual also documents an SB913A sled for three AAA cells without establishing inclusion. Headphone output is locking-thread 3.5 mm TRS; RF uses SMA. Transmitter AES3, Dante or Ethernet inputs are not assigned to this receiver. Identify actual band/variant, region, firmware, antennas and accessories.
ADPSM User Guide · 2.2 (2026-E) · ADXR · EN · ADXR product sheet · ©2024 · EN
Event application
For a show, broadcast or conference in Argentina, record listener role, mix source, L/R assignment and monitor owner. With program plus a voice reference, specify what feeds each input and the required balance; “stereo” alone is insufficient. Separate the listener’s pack from the engineer’s cue-review pack. This establishes no available inventory or coordinated/rehearsed system.
ADPSM User Guide · 2.2 (2026-E) · ADXR · EN
Handover records that affect listening
| Item | ADXR reference | Required record |
|---|---|---|
| Audio Mode | Stereo, Left, Right or Mix Mode | L/R sources and proposed mode; Mix Mode sums L/R to mono with balance |
| Status/control | Audio/RF meters, digital Channel Quality, ShowLink and Link Status are distinct | Indicator under review and owner for audio, RF or control verification |
| CueMode | Up to 64 settings sets, not simultaneous mixes | Owner-managed list, band and link status; applying may change mode and reboot |
| Battery | Rechargeable SB910 or SB913A with three AAA cells | Actual source/state/spare; SB910 percentage versus AAA bars |
Separate the incoming mix from output controls
Proposed matrix: console/source → identified transmitter input/channel → planned RF link → ADXR → identified earphones. Stereo preserves L/R; Left and Right select one input; Mix Mode sums both to mono and allows balance adjustment. This does not change console patch or replace feed review. Volume Lock, Volume Limit, Gain Trim, Limiter and Impedance Drive are separate parameters. Auto Z adapts output behavior to detected impedance, proving neither universal earphone compatibility, safe listening level nor appropriate user settings. Record proposed values and owner; this preparation connects no earphones and changes no levels.
ADPSM User Guide · 2.2 (2026-E) · ADXR · EN
Prepare CueMode, linking and battery handover
CueMode stores settings sets including transmission mode, band, frequency and audio settings; it is no 64-source simultaneous mixer. A linked receiver must be unlinked for CueMode, and applying a cue with a different transmission mode reboots ADXR. Exiting retains the last activated settings rather than proving automatic return to previous state. Separate this review from Sync, Sync (no link) and Rx ShowLink Network ID Update: the ID update syncs no audio and assigns no slot. ShowLink carries parameters, not the mix. SB910 percentage/health/cycle records are not attributed to AAA cells in SB913A. Standby and Power Save also affect audio/RF; a powered display proves no active reception. Actual runtime depends on battery, configuration and rehearsal.
ADPSM User Guide · 2.2 (2026-E) · ADXR · EN
Document the bodypack before handover
- Identify ADXR, label band, firmware and proposed transmitter. Record receiver, antennas, earphones and owner without copying encryption keys or private records.
- Assign mix and listener role. Complete L/R sources, Stereo/Left/Right/Mix Mode and output controls for review; adjust no volume, limiter or Impedance Drive here.
- Separate RF, audio, Channel Quality, ShowLink and Link Status. Record required synchronization scope and verifying owner; perform no scans, band changes or Sync.
- For engineer CueMode needs, prepare a list and owner. Record unlinking, potential mode-change reboot and last active cue as dependencies; create/apply/delete no cues.
- Record SB910 or SB913A/three AAA cells, state, spares and handover/rehearsal window. Perform no charging, device connections, transmission, listening measurement or firmware changes.
Frequently asked questions
Does CueMode receive 64 mixes at once?
No. It stores up to 64 settings sets for application to the receiver. The manual requires unlinking to use it and notes reboot when transmission mode changes.
Is Mix Mode the same as Stereo?
No. Stereo preserves left/right. Mix Mode sums both to mono and provides balance; identify the signal on each input.
Do ShowLink bars prove received audio?
No. ShowLink controls parameters. RF, audio, channel quality and link status have different indicators; none replaces complete signal-path verification.
Do AAA cells provide SB910 health/cycle records?
Those records are not attributed to AAA. The manual separates rechargeable SB910 percentage/specific data from AAA bars and type through SB913A.
Are menu lock, volume lock and output limiting one function?
No. Volume Lock, interface locks, Volume Limit and Limiter have distinct scopes. Record separately; they certify neither safe listening nor an appropriate level.
Complete the audio brief
Identified official documents
Existing SHA-verified originals: English ADPSM User Guide 2.2 (2026-E) and ADXR product sheet ©2024. Read 50 of 95 manual PDF positions: 1–3, 8–9, 14–21, 26–41, 43, 48, 51–65 and 77–80; visual inspection: 8, 54, 56, 58 and 60. Sheet: both pages read, page 2 visual. Receiver-specific sections inform this guide; combiner tables establish no ADXR capacity. Translations 2.2 (2026-G) were not read or assumed identical. Official links, no new local PDF or native reader test.
