From the live event to file delivery
For a conference, presentation or hybrid meeting in Argentina, tell us what the room needs to see and what material you want to retain. Ask Eventos Globales about video preparation, playback, distribution and operation; we coordinate signals and requested recording with camera and production teams. Start with the goal, even if models or formats are still undecided.
To re-edit a talk or choose another camera after the event, define isolated inputs as well as the finished program. The HD8 ISO guide helps prepare this HD delivery; agree on each team’s contribution and who reviews and copies the files.
Model and use
HD8 ISO combines an HD video switcher and control panel. It switches cameras and other sources, delivers program, and preserves separate feeds for later editing.
The base HD8 is not equivalent to HD8 ISO. The HD8 ISO 2TB variant includes internal storage; the HD8 ISO name alone does not establish installed capacity. This is not an Ultra HD switcher.
Sources, destinations, and files
- Inputs and format
- 8 3G-SDI inputs with frame synchronization and format/frame rate conversion. Supports HD formats up to 1080p60; check the system standard and actual source format. An HDMI computer requires suitable conversion to SDI.
- Outputs and control
- 2 SDI auxiliary outputs, program, and SDI/HDMI multiview serve different purposes. Ethernet and USB-C support control; USB-C also provides webcam output. Multiview HDMI is an output, not a presentation input.
- Recording
- Program and ISO inputs in H.264 .mp4; separate 24-bit 48 kHz .wav audio and a DaVinci Resolve .drp project. Check program and ISO recordings separately.
What to prepare
Identified sources and converters, multiview monitor, audio monitoring, and a destination list: display, stream, recording, or return. Define what each destination needs.
A USB-C drive recommended for HD8 ISO or identified internal storage, enough space for the session, and a backup plan. A USB connection to a laptop does not automatically make its drive a recording destination.
Basic preparation
- Identify HD8 ISO, storage variant, and software version. Set the HD standard before rehearsal and check recording modes for that revision.
- Connect power, multiview, and SDI sources. Label each input and check video and audio.
- Connect ATEM Software Control; prepare program and auxiliary outputs separately. Inspect each output at its receiver.
- In the recording palette, select the destination and enable ISO input recording if required for delivery. Check capacity and status before starting.
- Record a rehearsal with camera cuts and audio. Stop and inspect program, input, audio, and project files. Preserve the entire folder and open it in the intended editing workflow.
- Map each input to its use and expected files. Test program, auxiliaries, and recording with audio, then review the resulting folder with the editor; that check does not establish a second independent capture.
I recorded the program but cannot find the ISO files: what should I check before delivery?
Confirm the unit is HD8 ISO and input recording is enabled in the recording palette. A program recording does not demonstrate ISO recording.
If the option is unavailable, note switcher standard, software, and destination. Check mode restrictions in the manual before changing the standard; rehearse again and inspect the files.
Does “Internal” mean my computer’s drive?
Internal refers to storage installed in the switcher. The ISO 2TB variant includes it; identify the actual configuration on other units.
Match the destination name and capacity to the equipment. A computer can access switcher media over Ethernet; that does not mean recording is going to the computer’s own drive.
Why does the auxiliary output differ from program?
Auxiliary outputs can select an independent source. Check the assignment on the panel or in ATEM Software Control, and inspect the actual destination receiver.
Define whether that destination needs program, a camera, or another source. Multiview alone does not establish that a display or return is receiving the correct signal.
What should we request for a live stream and a later re-edit?
Agree on the finished program, separate sources, and editing audio. HD8 ISO supports program and ISO recording, but modes, media, and actual files still require checking.
We can distinguish production, recording, review, and delivery in the proposal. Share approximate duration and editing plans; any required second capture is evaluated as another path.
Are ISO recording and triggering camera recording the same?
They are different functions: recording inputs in the switcher and controlling recording in compatible cameras. Do not assume every camera responds or that both capture paths are ready.
We review models, connections, and media and test expected files. For additional protection, we also check which stages both paths share.
Checks by symptom
| Symptom | Check | What it helps distinguish |
|---|---|---|
| Program only | Model, ISO option, mode, and files. | Master recording versus isolated inputs. |
| Unexpected destination | Name, capacity, and installed storage. | Switcher media versus computer storage. |
| Wrong display image | AUX assignment and receiver. | Monitoring versus event output. |
Limits and precautions
Do not change the standard or firmware during an event without assessing effects on sources, outputs, and recording. Keep a reproducible configuration and rehearsal.
Input conversion does not make HD8 ISO an Ultra HD system or guarantee every recording mode. Check restrictions for the chosen mode.
Do not erase or format media without a backup. After recording, inspect and back up the entire folder before removing media.
Agree on delivery before choosing equipment
Separate live switching, recording, review and file copying. Specify what production supplies and what you want quoted. Fill in what you know; models, media and formats are finalized with the technical lead. The downloadable worksheet helps organize the conversation and does not send an enquiry.
Download recording and delivery worksheet (TXT)
Can I enquire before we choose cameras or a recorder?
Yes. Tell us the event type, city if known and expected deliverables: a ready-to-watch program, separate cameras for editing or both. Add duration and existing equipment when known. The proposal defines preparation, operation and who reviews and delivers files.
Related guide for identifying the variant and scope
Each model has its own inputs, modes and documentation. The comparison helps preparation; it does not assume the models can replace each other in your system.
Manufacturer sources and manual
Select the exact model in the manufacturer’s specifications and getting-started guide. The manual opens on the official site; this library does not host an ATEM PDF. Confirm the edition applicable to your unit’s software there.
Documentation consulted
Web references cross-checked: October 30, 2026. Identify model and versions and confirm the manual edition before applying settings.
