info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

← Back to guides and resources

Reference documentation · Sound

Radial JS2: microphone split, isolation and phantom

Prepare one microphone source for different preamps. Identify direct outputs, the isolated output and phantom owner for house, monitors or recording.

These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.

Equipment and operation for your event feeds

Tell us what the audience needs to hear and what stage, remote call and recording receive. Request sound equipment, setup, preparation and operation from Eventos Globales for conferences, presentations and shows in Argentina. Start with the running order and what the venue or production supplies; complete models, connections and schedules later.

Share the source while keeping separate mixes

If house and recording need their own preamp adjustments, assess where to split each source and the required isolation. A mix feed or digital sharing with agreed responsibilities may also be sufficient. Separate equipment/cabling, preparation, rehearsal and operation in the proposal; a splitter does not replace each destination’s resources.

One source, multiple destinations

JS2 is a passive mic-level splitter with one transformer-isolated and two direct outputs, not three isolated outputs. JS3 is a different model. Each destination preamp receives the same source for its own mix; the splitter is not a stereo mixer, recorder or backup microphone.

Proposed example: microphone to INPUT, DIRECT-1 to room preamp, ISOLATED to recording/broadcast preamp. Identify the second direct output if used; it does not gain JS3 isolation. A finished program may only need a mixer feed; remixing voices calls for per-source splits and enough recording inputs.

Phantom and split preparation

  1. Label source, output and mixer at each end. Radial identifies DIRECT-1 as the phantom return path to the mic. Agree one responsible power source and other-destination settings before connecting. Do not expect the isolated output to power the mic.
  2. Protect outputs and lower levels. Confirm microphone type/power; JS2 needs no supply. Check speech at each preamp and set gains separately. A mic feed needs a suitable preamp, not a line input selected by connector shape.
  3. If removing the room mixer silences a condenser, check whether DIRECT-1 lost its responsible power source. Plan handover off-program; do not toggle phantom as a live test. For hum inspect paths and documented audio ground lift while retaining protective earth.

More setup questions

Are all JS2 outputs isolated?

No. One output is transformer-isolated and two are direct. Choose destinations and isolation needs before connecting.

Who powers a phantom microphone?

Radial documents DIRECT-1 as the phantom return path. Assign the responsible preamp; the isolated output does not replace that path.

Plan console removal or handover

Identify the console powering the microphone through DIRECT-1 and the connections that remain during handover. An isolated output does not maintain that power by itself. Agree the procedure beforehand and rehearse required continuity with protected levels; sharing one source is not a second backup microphone.

Prepare the proposal and operator handover

Share city, date, running order and approximate source count. Identify venue-supplied items and tasks to delegate: equipment, setup, configuration, rehearsal or operation. Leave unknowns undecided. The worksheet is optional; downloading or completing it does not send an enquiry.

Download the sharing, preamps and returns TXT worksheet

What is needed to compare digital sharing and analog splitting?

Tell us sources, known consoles/interfaces, destinations and what each operator must adjust. Identify who supplies microphones and whether a console leaves during the program. A provisional list lets us prepare alternatives and complete connections, responsibilities and rehearsal.

Continue with the console and sharing method

Official system references

Consult official JS2 product, connection and usage pages. JS2 and JS3 are different models; select outputs and power for the actual configuration.

Documentation consulted

Document review: October 30, 2026. Official model-specific references and editions; no equipment changes or inventory verification performed.

Let’s prepare your event system

Tell us what you want to show, hear or light and what your production already provides. Start with the idea and add models, dimensions and schedules later. Mention the model or guide in your message; the related service is selected in Contact.

Enquire about equipment and servicesView the related serviceEvent preparation guide