Model and documentation reference
Reference model: Aputure STORM 1200x ProLock Bowens with BM7830 medium 30° reflector, identified in Reflector Kit AA00060000. This is distinct from STORM 1000c, LS 1200d Pro and STORM 80c Mini ProLock. Identify head, control box and head cable as an assembly. Selecting a reflector establishes neither availability nor approved support/mounting.
STORM 1200x · one-sheet/Reflector Kit · PDF 1–3
Event application
For a recorded discussion in an Argentine hotel, venue or office, mark window orientation/size, take times, subject, cameras and proposed bounce surface. Identify whether that surface belongs to the venue or is supplied by production. Record space outside frame and required permissions. A visible exterior background calls for agreed exposure/framing; changing position or time can matter as much as source selection.
STORM 1200x · one-sheet/Reflector Kit · PDF 1–3 · STORM 1200x · DMX 1.5 · 2025-07 · profiles 1/2 PDF 6
Limits that change preparation
| Reference | Documented fact | Rehearsal consequence |
|---|---|---|
| BM7830 · 30° | Medium reflector distinct from BM7815 15° | Preserve reflector, distance and bounce surface for comparison |
| DMX 1.5 · profile 1 | CCT+, 8-bit, three channels; profile 2 uses six | Confirm edition/personality before planning footprint |
| 1200x High-Speed | 20 % minimum intensity; FX unavailable in this mode | Do not expect a fade below that limit or assume camera validation |
| 1200x Silent | Fan off; output limited to 75 W | Preserves neither maximum output nor approved system audio |
STORM 1200x · one-sheet/Reflector Kit · PDF 1–3 · STORM 1200x · DMX 1.5 · 2025-07 · profiles 1/2 PDF 6
Separate profile, address and data reception
The July 2025 DMX 1.5 specification identifies profile 1 CCT+ 8-bit with intensity, CCT and green/magenta correction: three channels. Profile 2 at 16-bit uses six; preserving a palette name is insufficient. In a documentary example, start 101 would occupy 101–103 only if unit/personality correspond; no patch was applied. Record console, intended DMX/network path, universe and address. Model help separates CRMX link from data reception: a link establishes no delivery of the correct universe.
STORM 1200x · one-sheet/Reflector Kit · PDF 1–3 · STORM 1200x · DMX 1.5 · 2025-07 · profiles 1/2 PDF 6
Resolve electrical revision before finalizing comparison
The sheet contains 1440 W in a paragraph and 1550 W maximum consumption in its table; support describes Power Limit up to 1450 W. These references cannot be reconciled by choosing the smaller figure. Preserve actual label/revision/components and assign electrical design to the venue specialist. For image comparison, record Constant/Max Output, white standard, level/tint, camera and time. The same CCT guarantees no match to venue lamps or window light.
STORM 1200x · EN V1.0 · selected PDF pages, 26 visual · STORM 1200x · model-specific system settings
Plan a comparable scene and recovery
- Identify intended STORM 1200x head, control box, head cable and BM7830. Preserve permitted label records and known version; do not fill actual data from a catalog.
- Draw windows, cameras, subject and bounce. Record surface conditions/permissions; assign power, support and path review to the responsible specialist without mounting here.
- Prepare each control row with edition, profile, universe and address. If proposing DMX 1.5 profile 1, plan three channels and check overlaps; copy no 80c profile.
- Plan wide/close views, time changes, low level and transition. Record intended High-Speed/Silent choices and limits without approving flicker or audio.
- Agree on rehearsal window, owner and initial-state return. Preserve gaps; this package energizes no fixture, changes no network/radio, sends no DMX command, connects no USB and updates no firmware.
STORM 1200x · one-sheet/Reflector Kit · PDF 1–3 · STORM 1200x · DMX 1.5 · 2025-07 · profiles 1/2 PDF 6
Frequently asked questions
Does STORM 1200x mean 1200 W mains consumption?
Do not interpret it that way. Published output and consumption differ, and sources disagree. Confirm actual label/revision before electrical design.
Is BM7830 a zoom or Mini ProLock diffuser?
The sheet identifies a medium 30° reflector for STORM 1200x. Assign neither zoom nor the 80c Mini mount; verify actual part/assembly.
Does changing profile 1 to profile 2 preserve footprint?
In DMX 1.5, CCT+ 8-bit profile 1 uses three channels, while 16-bit profile 2 uses six. Verify edition/personality and neighboring addresses before actual patch preparation.
Do High-Speed and Silent always solve image and sound?
No. High-Speed sets a minimum level/excludes FX; Silent reduces output to 75 W in the consulted manual. Rehearsal must assess camera, microphone and full system under recorded conditions.
Does a CRMX link prove show reception?
No. Help distinguishes linked and receiving-data states. Record source, universe, address and profile instead of replacing path identification with resets/radio changes.
Follow the lighting control path
Official edition-specific documentation
Three existing SHA-verified originals: three-page one-sheet fully read, PDF 3 inspected; EN V1.0 product manual, 40 pages, only PDF 1/2/24–26/31/36 read and 26 inspected; July 2025 DMX Profile Specification 1.5, 36 pages, PDF 1/2/4–7 read and 6 inspected. Earlier sheet lists 12 profiles versus 1–32 in DMX 1.5: preserve editions without inferring installed firmware. No PDF downloaded/copied or local reader tested.
