Prepare sound from your program and space
Share city, date, program and audience layout. Start with a sketch and complete sources, equipment, connections and schedules with your production in Argentina.
Prepare a reception with announcements and music
For a cocktail event, presentation or reception, tell us where conversation, announcements and music will take place. Eventos Globales can assess equipment rental or purchase, mixing, placement, preparation, setup and operation. Start with the likely program and a sketch, then compare one position, separated points or a console with separate feeds for the space and sources.
Model and connections
- System
- KC12S + KC12T; active three-way column system
- Output A
- Input A THRU without DSP
- Output B
- Assignable mix; selection and DSP matter
Speech and music at one or two cocktail-event locations
Define conversation, announcements and music areas. A second unit may distribute listening more effectively; guest counts and added power alone do not establish need. Compare one position, two points or a distributed system using geometry and routes.
More microphones or different zone balances may require a console and separate feeds; another column does not create another mix.
Show preparation
- Identify KC12 components, firmware and available power; use only documented assembly on stable ground.
- With levels protected, select inputs and the feed to the second location; record presets, assigned mix and level.
- Check speech, music and pauses in both areas; agree who controls changes.
Questions and solutions
The microphone works here but not at the second column: which output should I check?
Output A follows input A without DSP; it does not automatically carry every source. Check ASSIGN OUTPUT B selection for a mixed feed. Compare each signal stage, cable and receiving input before raising volume; verify speech and music separately.
Can we mix speech and music without a console?
Local mixing and Bluetooth are available; count simultaneous sources and required controls. Built-in mixing may suit a few sources; compare an external console for several microphones, monitor feeds or different deliveries. Identify inputs, cables and the operator in the proposal.
Will two columns automatically fix a weak rear area?
No. Check positions, obstructions and listening at the front and rear. More level may worsen the near area. We can assess relocation or distributed points and alignment preparation; another event’s delay does not validate this setup.
Does the music preset also suit speeches?
Presets, contour, EQ, sub level and scenes affect results. Record the state and compare speech/music during rehearsal at controlled levels. A saved scene does not know the new room; prepare transitions without resetting during the program.
Can we use only the base or add a subwoofer?
The guide requires SUB ONLY MODE when operating KC12S without KC12T. For an external sub, distinguish THRU A from the post-DSP mix and use the documented function for the exact system. Sub settings do not transfer to a second column; configuration, location and verification belong in the proposal.
The app or level behaves differently: update before the show?
Identify firmware and applicable release notes. QSC documents control changes and fixes in 2.0.28; that does not establish every anomaly’s cause. Plan maintenance out of service with recovery and route testing; consider prepared local control or a wired source for continuity.
Should two KC12 systems sit side by side for more level in one spot?
QSC advises against placing two complete systems next to each other: overlapping columns can cause cancellations and degrade reproduction. This does not automatically add usable level. Compare a better single position with separated points designed for different zones; check the overlap area too.
How should we prepare a microphone for announcements between music?
Aim the PA at the audience and avoid directing its sound into the microphone; check the exact microphone pickup pattern. Rehearse the presenter’s actual path with music lowered before setting the level. If feedback starts, reduce the channel and review placement and open microphones; do not mask it with louder music. We can prepare mixing and operation or a console where zones need different balances.
When to add subwoofers to the program
Musical objectives and the exact system define the option; a sub does not fix speech clarity.
Define program and responsibilities
Separate speech, background music and DJ/band segments. Identify the instruments, desired musical result, venue restrictions and listening areas. Compare the planned system alone with a compatible extension; for speech, placement or pickup may be the first issue.
The proposal should assign crossover, filters, polarity, level and alignment, and identify the route to each element. An available XLR or another event’s frequency does not establish compatibility. Test separately and together using the same reference, particularly through overlap areas.
Questions and decisions
What can be quoted before the music is finalized?
Prepare an announcement base and a provisional music option, separating equipment, transport, power, space and preparation. Share date, city and likely program; complete models and configuration before defining quantities and settings.
Agree on the program and control of changes
Separate announcements, background music and any DJ or band segment. Record each party’s source, who controls the program and what each zone needs to hear. Prepare mixing, changes and the presenter’s route check, comparing alternatives that serve those tasks.
Prepare a useful proposal
Can I enquire before knowing whether there will be a DJ or live music?
Yes. Share date, city, space and likely program. Prepare a base for announcements and background music and compare a music option, detailing equipment, preparation and operation when the program is confirmed.
Can you prepare and operate mixing with equipment supplied by the hall?
Assess that scope. Identify sources, connections, microphones, zones and test schedules with the hall’s representative; separate existing resources from required equipment and services in the proposal.
Enquire about event equipment and services
Share program, city, date and venue-supplied equipment. Assess rental, purchase, integration, preparation and operation for the required scope. Contact opens with Sound selected; mention KC12 or XMV4280 if relevant and review the message before sending.
Record sources, destinations and program checks
Use the existing speech rehearsal worksheet to record sources, feeds, responsibilities and test results.
Download editable speech rehearsal worksheet · TXT
Continue with system and mix preparation
Official references and editions
KC12 product page and User Manual WA-001007-01-D, 28 English pages. Identify components and unit version; current detailed verification of outputs and SUB ONLY MODE remains pending.
Documentation consulted
Reviewed October 30, 2026. Product page and initial manual opening readable; later output and SUB ONLY MODE queries timed out. Detailed text retains reference documentation and needs current edition and firmware checks during preparation.
