info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

← Back to guides and resources

Reference documentation · Lighting

Source Four LED Series 2 Lustr: cut, optics and Direct map

To light a lectern while keeping the screen behind it clear, describe the required area and edge first. Then review optics, position and control together. This guide records the patch and compares fixtures without confusing DMX reception, profile and mix; actual coverage and image need rehearsal.

These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.

Model and documentation reference

Selected reference: ETC Source Four LED Series 2 Lustr S4LEDS2LS-0 with shutter barrel, distinct from barrel-less S4LEDS2L-0. Rev R January 2025 sheet lists lens tube and clamp separately. The common Source Four LED manual 1.8.2 Rev B, February 2024, is read using the Series 2 Lustr column; Lustr+, Daylight HD, Tungsten HD and Series 3 maps are not transferred.

Source Four LED Series 2 data sheet · Rev R 2025-01

Event application

For a conference in Argentina, record lectern, speaker route, approximate throw, screen size, camera and permitted positions. Shutters shape the cut together with focus and the confirmed tube. Record tube and barrel model: LT/EDLT and XDLT need compatible assemblies; nominal angle establishes no direct interchange, transmission or coverage. Actual-unit availability and accessories remain unconfirmed.

ETC · lens tube and shutter barrel compatibility

Series 2 Lustr Direct: reference with Strobe and DMX Fan

Series 2 Lustr Direct: reference with Strobe and DMX Fan
Relative channelRoleReading condition
1–7Red, lime, amber, green, cyan, blue, indigoOrder from the Series 2 Lustr column only
8Overall intensityDo not assume intensity on channel 1
9StrobeWith Strobe enabled in this reference
10Fan controlWith Fan Mode set to DMX in this reference

Source Four LED 1.8.2 · Rev B 2024-02 · Series 2 Lustr column

Separate present data from a matching personality

The sheet documents DMX/RDM over five-pin XLR. Record console or node, universe, address, profile, Strobe, Plus Seven and Fan Mode. DMX Settings shows count and order for selected options; compare that footprint with personality and neighboring fixtures, without counting colors alone. Quick Setups groups settings and may change several conditions; preserve the initial state before proposing another. No values are sent and no patch is changed here.

Source Four LED 1.8.2 · Rev B 2024-02 · Series 2 Lustr column

Compare color while preserving the reference configuration

The manual applies calibrated Direct to Series 2 Lustr from v1.8.1; identify version and state before comparing. Plus Seven can alter that correspondence when individual colors are changed. Do not copy values across versions or modes expecting the same result. For camera work, record surface, optics, level and exposure, comparing one fixture at a time. Preserve Data Loss too: Instant and HLL handle control loss differently; a node that keeps transmitting may prevent the fixture from seeing that loss.

Source Four LED 1.8.2 · Rev B 2024-02 · Series 2 Lustr column · ETC · Series 2 Direct color matching · version applicability

Prepare a useful event comparison

  1. Identify S4LEDS2LS-0, version, barrel, tube and accessories from labels or documentation. Keep per-unit uncertainties without opening, resetting, recalibrating or updating equipment.
  2. Draw the lit zone and screen boundaries; record throw and viable positions. Agree on mounting and focus review with the technical owner before rehearsal.
  3. Transcribe profile and options from fixture records. Compare the Series 2 Lustr map with personality, footprint and next neighbor. Identify strobe without triggering it.
  4. Agree on an off-program sample with a fixed camera, one fixture and one change at a time. Separate color, intensity, edge and background spill; preserve observed or pending results.
  5. Record data source, Data Loss and local state, including presets or Quick Color. Define return owner and configuration without disconnecting an active line for diagnosis.

Source Four LED 1.8.2 · Rev B 2024-02 · Series 2 Lustr column

Frequently asked questions

Does ten-channel Direct mean ten in every setup?

The reference includes Strobe and DMX fan control. Fixture options determine count and order; confirm the actual footprint in DMX Settings before reserving addresses.

Why can dimmer fail while data is present?

Intensity is on channel 8 in this Series 2 Lustr map. Another-generation personality may address another role; DMX reception establishes no model/profile match.

Does identical Direct automatically match color and intensity?

Version and calibration options matter. ETC support distinguishes color matching from intensity differences; equal numbers establish no actual result.

Can any Source Four lens be used without checking the barrel?

No. Verify tube, barrel and variant. Support distinguishes LT, EDLT and XDLT pairings; no included lens is assumed and no conversion is performed here.

Does leaving Quick Color cancel all local state?

The manual says it returns to the state before entering that menu. Record presets and sequences as well as Data Loss; leaving the screen establishes no cancellation of all local control.

Follow the lighting control path

Download Series 2 cut, optics and Direct worksheet

Official edition-specific documentation

Common Source Four LED manual 1.8.2 Rev B 2024-02: PDF 1–5, 7–8, 34, 37–41, 49–54 and 68 consulted; p. 41, printed 35, visually inspected by column. Rev R 2025-01 sheet: PDF 1, 2 and 13 consulted; p. 1 inspected for with/without-barrel variants. Color and optics support cross-checked; existing originals SHA verified, without new copies or a tested local reader.

Plan lighting for your event

For speaker-cut planning in Argentina, share city, lectern/screen photo or sketch, approximate throws, camera and body/tube labels if available. This scopes missing optics and checks. Technical material establishes no stock, availability or rehearsed installation.

Enquire about equipment and servicesView the related serviceEvent preparation guide