info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

← Back to guides and resources

Reference documentation · Sound

Shure AD600: prepare event RF coordination

Organize microphones, in-ears, antennas and zones; distinguish scanning, calculated plans, deployment and whole-system tests.

These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.

Prepare voices for your event

Tell us the city, date, speakers and their movements. Eventos Globales can prepare a sound equipment rental, purchase and integration proposal, preparation and operation in Argentina. Start with the program and your team’s resources; complete models and connections during preparation.

Coordinate wireless systems from several production teams

For a conference, show or event with rooms and a stage, collect venue, artist and supplier wireless systems. Assess surveys, analysis equipment, RF coordination, antenna integration and monitoring. Separate advance preparation, change windows and responsibility for checking each system.

Model and scope

AD600 is an Axient Digital spectrum manager. Its scanning range is 174 MHz–2 GHz and it has six antenna connections; these are not six wireless microphone channels. It does not replace system receivers or the audio mixer.

A scan describes what reaches those antennas at that location and time. It does not guarantee an interference-free event. Frequency selection must consider equipment, locally permitted bands and coordination with other venue users.

Connections and limits that matter

Antennas and RF paths
Map each input to a zone, antenna, band and cable. Enable bias only when a compatible accessory needs it; check current limits and alarms in the manual.
Networking and coordination
Wireless Workbench extends control and monitoring options. Record the network, managed devices and versions; a calculated list does not prove deployment to every transmitter and receiver.
Two listening paths
Listen supports Shure’s specified RF signal types, including certain analog systems and unencrypted Axient Digital. Dante Browse monitors audio from networked Dante devices. These are different paths, not universal RF demodulation.

Prepare the system in stages

  1. List models, bands, transmitter counts, zones and other RF systems. Save the configuration and frequency plan, assign an RF coordinator and agree on a window for tests and changes.
  2. Check antennas, coax, distribution and bias against the actual accessories. Label inputs and locations; a display setting cannot correct an antenna that misses the required band or zone.
  3. Capture activity and label files with date, location and conditions. Distinguish a saved capture from a live scan. Review coordination with the other systems before deploying frequencies.
  4. Make changes with the RF coordinator outside critical operation. Confirm transmitter/receiver pairs and walk-test with all planned systems running; also check console audio and a rehearsal recording.

Example event preparation

For a proposed conference with a main stage and support rooms, build one microphone and in-ear inventory. Identify which antenna observes each zone and repeat listening and walk tests where users will move.

Keep the approved plan, captures and agreed contingency. Separate advance surveys, coordination, antenna distribution and live monitoring when defining the service scope.

Troubleshooting: find the failing stage

If the table is wider than your screen, scroll it horizontally. You can also use the arrow keys with focus inside the table region.

SymptomWhat to checkHow to verify the result
The spectrum looks emptyCheck antenna, cable, observed range, enabled input and live versus saved view.Compare with a known authorized test signal without changing the show.
RF is visible but audio is missingSeparate RF Listen compatibility/encryption from Dante Browse and its network path.Test each compatible method and compare with receiver audio.
Dropouts appear when all systems runReview combined coordination, placement, distribution and conditions in each zone.Repeat the walk test with all planned systems running and save observations before adjusting.

Frequently asked questions

Are the six inputs six receivers?

No. They are RF connections for antennas and zones. Receivers and audio channels must be sized separately.

Can it listen to every digital transmission?

No. Listen has supported signal types and restrictions, including Axient Digital encryption. Dante Browse is separate and needs the corresponding network-audio path.

Does a clean scan guarantee the whole event?

No. Locations, activity and systems change. Record conditions, test the complete setup and agree on monitoring and contingency.

Can frequencies be changed on air?

Do not redeploy without operational coordination. The RF lead must assess impact, agree on a window and verify each affected pair.

Should bias be enabled on every input?

Not by default. It depends on the connected antennas and distribution, compatibility and the unit’s individual and total limits.

What can I send at the beginning?

Start with rack photos, an initial microphone and in-ear list or a preliminary rundown. Add rooms, approximate system counts and any known models and bands; include the date and venue when confirmed.

Separate capture, coordination and deployment

AD600 manual v3.4 (2024-C) separates Live scan from saved files and Calculate from Deploy. Record antennas, zones and conditions before using data for coordination. Prepare deployment with the RF lead and check each pair; RF Listen and Dante Browse use different paths with their own compatibility.

Choose equipment, preparation and operation

Can we start when each artist brings different equipment?

Yes. Share the initial microphone and in-ear list, known bands, stage or rooms and overlapping schedules. Identify undecided items. Prepare the survey and coordination scope with each supplier’s responsible operator.

How does an advance survey differ from monitoring during the event?

A survey records conditions and helps prepare the plan. Monitoring follows systems during operation. Scope these tasks separately with test windows, responsibilities and contingency for the program.

Tell us who speaks and what each destination needs

Share city, date, stage or rooms, simultaneous systems and each team’s resources. Request equipment, surveys, coordination, preparation and operation for your needs. Contact arrives with Sound selected; mention AD600 or PSM1000 with P10R+ in the message if relevant. Complete models later and review before sending.

Record the test of each voice

Reuse the optional speech rehearsal worksheet: speaker, positions, movement, destinations, result and owner. Add model, band and mode to the technical map prepared by each team.

Download speech rehearsal worksheet (TXT)

Continue from coordination to reception and monitoring

Model documentation and reference edition

Official AD600 manual v3.4 (2024-C),29 pages,in English: antennas, coordination, capture, Listen and Dante Browse. Compare document edition with actual units and the event plan.

Documentation consulted

Checked October30,2026: official sections compared by model and variant. Complete documentary preparation with bands, versions, connections and rehearsal of the actual system.

Let’s prepare your event system

Tell us what you want to show, hear or light and what your production already provides. Start with the idea and add models, dimensions and schedules later. Mention the model or guide in your message; the related service is selected in Contact.

Enquire about equipment and servicesView the related serviceEvent preparation guide