Model and documentation reference
ME-500 is a StageRight support system. Reference 319536 is a conditional documentary scenario: the table assigns it an adjustable 36–56-inch height. This identifies no actual supplied unit. The same packet includes 319532 and 319548 with different ranges. The official filename is pip-me-500-20161209.pdf; PDF metadata records 2009 creation/modification, and filename date establishes no printed revision. ME-3750 caster procedures are not transferred; support, deck and accessories are not assumed to form a single item.
StageRight ME-500 · Product Information Packet · EN · filename20161209, printed revision unconfirmed
Event application
For a conference, show or presentation in Argentina, prepare required width, depth, height, intended use, city and venue. Locate proposed platform items and interfaces with access, finishes and other systems; mark separately documented components. Identify layout author, component supplier and assembly reviewer. This scopes an inquiry without establishing stock, availability, load capacity or venue acceptance.
StageRight ME-500 · Product Information Packet · EN · filename20161209, printed revision unconfirmed
Compare the reference before mapping supports
| Reference or component | ME-500 packet record | Required identification |
|---|---|---|
| 319532 | Adjustable height 32–48 inches | Actual part number; no automatic transfer of another reference’s range |
| 319536 · conditional reference | Adjustable height 36–56 inches | Actual part/label and proposed height; no verified adjustment or installation |
| 319548 | Adjustable height 48–78 inches | Own part/configuration; no substitution for 319536 by resemblance |
| Decks and locators | Single, Dual and Quad Locator diagram and bridged decks | Deck, support and interface per position; no allowable-load/span table |
StageRight ME-500 · Product Information Packet · EN · filename20161209, printed revision unconfirmed
Map each deck to its supports and interfaces
Proposed matrix: layout position → identified deck → ME-500 support part → proposed locator/fasteners → assembly review. The packet shows unfolded supports with button stops and a retractable locator retained by a faspin. Leg-tube faspins select height, while screw feet and jam nuts provide leveling/retention. These are distinct functions: a nominal height proves neither leveling nor engaged fasteners. Single/Dual/Quad and bridging diagrams illustrate interfaces; they authorize no omitted support, selected clear span or inferred stage capacity. Complete layout and actual decks/accessories require review.
StageRight ME-500 · Product Information Packet · EN · filename20161209, printed revision unconfirmed
Prepare documentary handover records
For the assembly owner, identify faspins, button stops, jam nuts, locators and decks to compare with the manual and actual unit. General rules require engaged fasteners and properly positioned decks; maintenance calls for fastener checks and genuine replacement parts for damaged equipment. Record these dependencies without performing the procedure. Separate component condition, support layout, receiving-floor conditions and use review. Shipping dimensions and support weight establish no allowable load or venue suitability. Where part number, layout or accessory document is missing, retain that point while completing independently verifiable records.
StageRight ME-500 · Product Information Packet · EN · filename20161209, printed revision unconfirmed
Collect the stage review records
- Identify actual support/part number and compare 319536 with the packet table. Missing labels or a different reference do not justify adopting its conditional range.
- Prepare layout with required dimensions, proposed height/use and platform items. Name each deck, support, interface and accessory with document provenance.
- Complete support/locator/fastener mapping by position. Mark bridging proposals for specific review; calculate no spans or loads from a generic drawing.
- Assign component, fastener, deck-position, leveling and receiving-floor review to the assembly owner. This sheet establishes no performed physical inspection or acceptance.
- Record missing information, owner and assembly/review/handover window. Perform no unfolding, pin release, foot/jam-nut adjustment, deck placement, equipment movement or load testing.
StageRight ME-500 · Product Information Packet · EN · filename20161209, printed revision unconfirmed
Frequently asked questions
Does 319536 identify every ME-500?
No. It is one of three table references. It is conditional here and needs comparison with the actual part before assigning range/configuration.
Does the bridging drawing allow support removal?
That is not inferred. It illustrates deck/locator relationships but establishes no approved layout, clear span or capacity for the actual assembly.
Does selecting height prove a level deck?
No. The manual separates tube-faspin height selection from screw-foot/jam-nut leveling. Both need separate physical verification.
Can the ME-3750 caster procedure be used?
It is not transferred. This guide uses the ME-500 support packet; actual unit identification remains pending.
Do this sheet and PDF certify the event stage?
No. They are references/documentary preparation. Actual components, floor, layout, use, assembly and acceptance require review by the responsible parties.
Continue the layout and brief
Identified official documents
Existing SHA-verified original: StageRight Product Information Packet, ME-500 Support Systems, EN; filename pip-me-500-20161209.pdf. All ten PDF text positions read; positions 5–9 visually inspected, corresponding to printed pages 4–8. Reference table and drawings checked against labels. Filename 20161209 is not treated as a printed revision; 2009 PDF metadata recorded. Official link retained without new local PDF, transferred reproduction rights or native reader verification.
