Let’s prepare a large image in limited depth
Tell us image width/height, room use and audience routes. With photos and sample content we can evaluate rental or purchase, surface, placement, signal, configuration and operation in Argentina; complete measurements and support with the venue.
What we define for a quote
Separate exact unit, screen/surface, mount, power, ventilation, signal, content and sound. Agree source changes, operation and who accepts readability, focus and contrast under event lighting.
Model and application
LU960UST is the WUXGA 1920×1200 DLP laser model covered here. Plan placement using the actual body and orientation; LU960ST, LU960ST2 and LU960UST+ require their own references.
Signal and optics
- Optics
- Fixed throw 0.25, without variable optical zoom. Verify size, height, and clearances in the manual’s drawing, rather than a generic wall distance.
- Signal
- HDMI input and output and HDBaseT; separate control LAN. Identify each connector’s function before cabling.
System preparation
- Define useful image area, bottom height, and equipment space outside walkways.
- Use manual references A/B/C to position cabinet and screen; test before fixing the installation.
- Align physically, display a pattern, and focus after at least 15 minutes of continuous projection.
- Test content, audio, and each conversion with planned lighting and circulation.
Planning questions
Does throw 0.25 tell me the cabinet-to-wall distance?
Read separately A: projector top to screen bottom; B: cover-glass center to screen; C: projector front to screen. The V3.00 manual drawing, printed page 21, defines each dimension. Use the chosen size to plan placement and check the actual unit before fixing the mount.
Can I use a roll-up screen or any ALR surface?
Check flatness and compatibility with the direction of incoming light. An ALR label does not establish suitability for these optics. Compare an appropriate surface with TV or LED if projection conditions cannot be met.
Can people walk beside the projector?
Map cabinet, cables, ventilation, and beam to preserve circulation and avoid direct viewing or shadows. If placement interferes, assess another installation or technology; short distance does not remove those clearances.
How do I address text that is blurry along one edge?
Allow warm-up and check pattern/focus. Check flatness, leveling, and placement before corner correction; if it persists, record the affected area without assuming a laser fault.
Can I connect HDBaseT to the network switch?
HDBaseT and LAN are not interchangeable because they use RJ45. Specify a compatible transmitter, format, and cable, then test the complete path before quoting it as a solution.
What should I hire for a restricted space?
We can evaluate rental or purchase, screen, installation, configuration, signal and operation in Argentina. Start with date, venue, audience and content; complete dimensions/setup with the venue. A sample helps agree rehearsal and readability acceptance.
Checks by symptom
| Irregular geometry | Manual drawing, leveling, and surface before correction. |
|---|---|
| No image | Correct input, active source, and identified HDMI/HDBaseT path. |
Use and safety
Do not look into or obstruct the beam; do not open the laser assembly.
The manual requires ventilation clearance around the unit. Check it on the installation plan; short optical distance does not replace it.
Preliminary geometry before surveying the installation
Fixed 0.25 describes the optics; use the A/B/C drawing for body placement and check surface, height and clearances with the unit. BenQ specifies 5% optical tolerance and a physical test before permanent installation. Plan mounting with the venue and technical lead.
| Path | What to compare | What to confirm with production |
|---|---|---|
| Surface and image | WUXGA 16:10; flat surface compatible with UST incidence. | Text, uniformity and contrast under event lighting. |
| Body and routes | V3.00 manual A/B/C references, page 21. | Height, body, beam, ventilation and walking routes on venue plan. |
| Signal and focus | HDMI or HDBaseT; focus after at least 15 minutes of continuous projection. | Identify transmitter/cable; rehearse pattern, source and audio. |
Record the room survey and readability test
Use the existing worksheet for image, optical-reference distance, height, back row, light and content sample. Add mount, walking routes, source/format, sound, rehearsal, operator and readability/focus acceptance owner.
Download projection and readability worksheet
Use not yet defined and complete details later. The worksheet downloads blank; retain your copy and describe the need in Contact. Preparing a worksheet or draft does not send an enquiry.
Continue with the production segment you need
Each guide retains model-specific connections and limits. Compare the handoff and each supplier’s contribution.
Official documentation by model and edition
Official specifications and LU960UST V3.00 manual consulted: fixed optics, ports, A/B/C dimensions on page 21 and stabilization before focus on page 9. Verify unit and orientation before installation.
Documentation consulted
Review: 30 October 2026. Official specifications and stated manual sections consulted. Own geometric estimate checked; unit setup and rehearsal remain to be prepared.
