info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

← Back to guides and resources

Reference documentation · Sound

Allen & Heath SQ-6: trace a voice to the PA and check mute paths

A moving meter does not establish that a voice reaches the intended loudspeaker. For a plenary session, trace an identified source through socket, channel, mix and output. If a monitor remains audible with inputs muted, locate its actual path before raising levels or rebuilding the show.

These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.

Model and documentation reference

This guide covers the original Allen & Heath SQ-6; SQ6+ is a different model. Reference Guide V1.6.0 Issue 2 explicitly includes SQ-6 on page 7. It was cross-checked against official HTML documentation for connections, processing, routing and metering. Record installed firmware: consulting that edition establishes neither the unit’s version nor compatibility with an unidentified rack.

A physical input, processing channel and output are distinct elements. The loaded show determines their assignments; labels or factory patching do not prove the current setup.

Allen & Heath · SQ-6 · Resources · SQ Reference Guide · V1.6.0 Issue 2 · EN · pp.7,23–27,30,46,50,52–53

Event application

For a conference in Argentina, create one row per voice and playback source. Specify who must hear it: audience, stage, remote guest or recording. Identify equipment supplied by the venue and production separately. For a speaker-to-music change, agree on a known cut control for each destination and a return look; a fader name does not establish the socket it feeds.

Four I/O routes to distinguish

Four I/O routes to distinguish
RouteMeaningRecord
Input ChannelSocket to channel for mixingSource and channel number
Mix OutsMix to output socketLR/Aux/Group/Matrix and socket
Direct OutsOutput from an input channelTap point and mute-follow setting
Tie LinesInput directly to outputSource, destination and actual cut control

SQ · Connections and Patching · 21/04/2026

When the channel has signal but the PA does not

In Processing > Preamp, Source Select identifies the source; Unassigned means the channel has none. Compare the socket with Inputs > Input Channel. Then trace LR assignment and send, processing, mute and relevant DCA controls. If LR has signal, compare Outputs > Mix Outs with the physical socket used by the system. Direct Outs is not an LR mix substitute. Record meter tap points too: Input Meters and Mix Meters have separate selections. The PAFL LED meter follows the operator’s listening bus; it does not itself prove delivery to the PA.

SQ · Processing · 06/05/2026 · SQ · Connections and Patching · 21/04/2026 · SQ · Routing · 21/04/2026 · SQ · Metering · 21/04/2026

When mute does not cut the intended destination

Tie Lines can pass an input to an output without channel processing, mixing or level control. Mix Ext In feeds a source directly into a mix, bypassing its input-channel paths. A Direct Out may follow fader/mute or not, according to global options; changing them affects other channels and destinations. Identify recording, monitors and external feeds before proposing changes. If feedback occurs, keep the destination controlled with its known cut; do not reopen audio to reproduce a problem without an agreed test.

SQ · Connections and Patching · 21/04/2026 · SQ · Routing · 21/04/2026

Prepare one source-and-destination test at a time

  1. Preserve the current show, scene and patch photos. Record actual model, firmware, rack and cards without loading a template from another event.
  2. Trace a known source from socket to channel and mix to output. Record where signal appears or disappears and which meter point you observe.
  3. Agree on test level and destination owner. Check one variable at a time rather than changing gain, routing and processing together.
  4. For a parallel path, document Mix Ext In, Tie Lines and Direct Outs before changing crosspoints or global options. Restore rejected changes.
  5. During rehearsal verify voice, playback, foldback and recording at their actual destinations. Record which control cuts each output and what remains unresolved; do not infer delivery from PAFL.

SQ Reference Guide · V1.6.0 Issue 2 · EN · pp.7,23–27,30,46,50,52–53

Frequently asked questions

Does a moving PAFL meter confirm audio in the room?

No. It represents operator listening. Check mix, physical socket and destination separately.

Does an output label or number guarantee LR?

Outputs are assignable. Check the current Mix Outs patch and actual cable path.

Why is audio present with inputs muted?

Another route may exist: Mix Ext In, Tie Lines, Direct Outs or other sources. Trace it before blaming a pre-fader send alone.

Does changing Follow Mute affect only one channel?

Global Direct Out options affect all channels. Check recording and other destinations before modifying them.

Does Network replace an audio connection to the rack?

Documentation assigns it to control. SLink and I/O Port have specific functions and protocols; identify rack, card and topology instead of inferring compatibility from the connector.

Follow control and distribution

Download the source, mix and output worksheet (TXT)

Official edition-specific documentation

SQ Reference Guide V1.6.0 Issue 2, English: model p.7; patch pp.23–27; source p.30; Direct Out p.46; sends p.50; metering pp.52–53. Compare the linked official HTML documentation with actual firmware. These are documentary references, not a test of this console.

Plan sound for your event

Include date, city, venue and number of voices and playback sources. Add console, rack, required outputs and what audience, stage, remote guests and recording must receive. For a fault, identify socket, channel, mix, output and observed signal points to prepare an EG sound inquiry.

Enquire about equipment and servicesView the related serviceEvent preparation guide