Let’s prepare projection and source changes
Share date, venue, screen and a sample presentation. We can evaluate projection/screen rental or purchase, installation, computer integration, sound and operation in Argentina. If you supply equipment, prepare connections and a joint rehearsal.
What we define for a quote
Separate exact unit, screen/surface, mount, power, ventilation, signal, content and sound. Agree source changes, operation and who accepts readability, focus and contrast under event lighting.
Model and application
TH671ST is a lamp-based Full HD projector with short-throw zoom optics. We evaluate integration with your event screen, sources and services; identify the proposed unit and its condition during preparation.
Signal and optics
- Image
- 1920 × 1080 pixels; 16:9 aspect ratio and specified brightness of 3000 ANSI lumens. Usable size depends on light, screen, and content.
- Optics
- Throw ratio 0.69–0.83:1; 1.2× optical zoom and manual focus. Measure distance from the lens and check the manual’s table.
- Connections
- HDMI for digital sources and audio connections; USB-A power and service USB are not general video inputs.
System preparation
- Record date, venue, audience, screen, and available distance; start with photos and approximate measurements if drawings are not ready.
- Check placement and height using the optical table and a flat surface. Adjust zoom and focus before digital correction.
- Test the actual computer and content, including small text, video, and audio; then introduce intermediate devices.
- Allow shutdown and cooling time under the manual before handling or packing. Check lamp condition and history during technical preparation.
Planning questions
- When might it suit a show or conference?
- Is it the same as an ultra-short-throw laser projector?
- Do lumens establish audience capacity or screen size?
- What if text is sharp at the bottom but blurry at the top?
- What changes because it uses a lamp?
- What can I hire, and what information should I send first?
When might it suit a show or conference?
It can be assessed for a presentation or demonstration requiring the screen relatively close to the projector. We check size, walking routes, and light falling on the surface. If content is unreadable or placement unsuitable, we can compare another projection system, a display, or LED.
Is it the same as an ultra-short-throw laser projector?
No. This model uses a lamp and short-throw optics with zoom; ultra-short throw needs different installation geometry. We compare both using image width and available depth, rather than housing size or the word short alone.
Do lumens establish audience capacity or screen size?
There is no direct conversion. We need back-row distance, text size, screen, and ambient light. Options include controlling light, changing size, simplifying content, or another technology. Test the intended presentation in the image mode that will be used.
What if text is sharp at the bottom but blurry at the top?
First compare the internal pattern with the source and check screen flatness, alignment, height, and focus. Avoid large digital correction to compensate for poor placement. If the pattern remains uneven with correct installation, request technical inspection; internal optics are not adjusted during an event.
What changes because it uses a lamp?
Check mode, lamp condition, ventilation, and shutdown. Use the hour counter as a maintenance reference and also inspect the unit’s condition and brightness. Lamp replacement and counter reset follow the model’s service procedure; identify the cause of the fault first.
What can I hire, and what information should I send first?
We can evaluate rental or purchase, screen, installation, configuration, signal and operation in Argentina. Start with date, venue, audience and content; complete dimensions/setup with the venue. A sample helps agree rehearsal and readability acceptance.
Checks by symptom
| No image | Check lens cover, powered source, selected input, and a known direct cable; check computer output before adding adapters. |
|---|---|
| Blurry image | Compare pattern and source, check focus and alignment; do not confuse small or scaled text with an optical fault. |
| Will not restart immediately | Check whether cooling is still underway and follow the manual. Avoid rapid power cycles or defeating protection. |
Use and safety
Do not look into the beam and keep vents clear. Plan mounting and orientation under the manual, avoiding impact, cables in walking routes, and heat buildup.
Do not open or service a hot lamp. Inspection or replacement requires the model’s service procedure and qualified personnel.
Preliminary geometry before surveying the installation
Preliminary example: optical distance ≈ width × throw ratio. For 3 m width, 0.69–0.83 gives 2.07–2.49 m. This is an estimate from the optical reference; verify the table, height, supported size and actual position before selecting the mount.
| Path | What to compare | What to confirm with production |
|---|---|---|
| 3 m image, example | 0.69–0.83 throw: optical estimate 2.07–2.49 m. | Check placement/height with the unit and model table. |
| Content and focus | Full HD 16:9, 1.2× zoom and manual focus. | Pattern and actual text at center/edges, with aligned screen. |
| Operation and closing | Lamp, sound and cooling in the technical schedule. | Identify mode/condition, operator, shutdown and packing. |
Record the room survey and readability test
Use the existing worksheet for image, optical-reference distance, height, back row, light and content sample. Add mount, walking routes, source/format, sound, rehearsal, operator and readability/focus acceptance owner.
Download projection and readability worksheet
Use not yet defined and complete details later. The worksheet downloads blank; retain your copy and describe the need in Contact. Preparing a worksheet or draft does not send an enquiry.
Continue with the production segment you need
Each guide retains model-specific connections and limits. Compare the handoff and each supplier’s contribution.
Official documentation by model and edition
Official specifications and TH671ST V1.04 manual consulted: optics, ports, zoom/focus on page 16 and shutdown on page 26. Plan cooling and lamp preparation using the applicable procedure.
Documentation consulted
Review: 30 October 2026. Official specifications and stated manual sections consulted. Own geometric estimate checked; unit setup and rehearsal remain to be prepared.
