Let’s prepare framing and signal at your venue
Tell us what the audience must read, screen format and what prevents moving the projector back. We can evaluate rental or purchase, screen, signal transport, installation, configuration and operation in Argentina. Start with a photo, sample and approximate dimensions; complete setup/timing with the venue.
What we define for a quote
Separate exact unit, screen/surface, mount, power, ventilation, signal, content and sound. Agree source changes, operation and who accepts readability, focus and contrast under event lighting.
Model and use
We can prepare presentation/video projection with screen, signal and operation defined. With date, venue, content and audience, evaluate rental or purchase and setup/integration services in Argentina; complete models/dimensions with production.
LU935ST is a WUXGA laser DLP projector with native 1920 × 1200 imaging and a 16:10 aspect ratio. BenQ US specifies 5500 ANSI lumens and a 0.81–0.89:1 throw ratio.
Short throw helps explore positions close to the screen. Choosing a location also requires reviewing content format and people moving in front of the image.
Source, audio, and connection
- Direct picture
- Two HDMI inputs are available. Share source and output to prepare cable, adapter, and playback testing.
- HDBaseT
- A compatible transmitter is required. The LAN control port and HDBaseT have different functions and are not interchangeable.
- Audio
- Define where the presentation needs to be heard. We can coordinate sound and picture paths and test actual content.
What to prepare
Share screen width and height, approximate lens distance, and a space photo. We can compare options before a floor plan is ready.
Tell us whether people will be in front of the screen and whether content includes slides, video, or simulation. Share a sample and the viewing position.
Alongside approximate dimensions, tell us what prevents moving the projector farther back: a table, circulation, stage, or another obstacle. Indicate whether the screen is installed and whether you need equipment only or review of signal, mounting, and operation.
Basic preparation
- Confirm the label says LU935ST. Keep a panel photo and starting settings.
- Compare placement with the ST-specific optical table; test image size and focus on site before securing the mount.
- Adjust zoom, focus, and lens shift before completing digital framing.
- Select the connected input and test the picture with the actual computer.
- Review from audience positions under planned lighting. Agree on text sizes, framing, and source changes before presenting.
- Compare the proposed position with a different layout or usable image size. In both, check center and edge focus and audience circulation with actual content; if the optics do not support the position, revisit the plan before relying solely on digital correction.
Technical questions and show decisions
- The image does not fill the screen: what should I check before changing the installation?
- Can the network cable connect to either port?
- What if the picture is positioned correctly but text is not sharp?
- Does short throw allow any position without shadows?
- What should we request for videos and laptop changes during a show?
The image does not fill the screen: what should I check before changing the installation?
Let’s review width, height, file format, and lens position together. We can compare full framing with options that leave margins or require adapting the design.
Optical zoom is 1.1x. Digital correction does not extend its optical range; test placement before deciding to change the mount.
Can the network cable connect to either port?
LAN provides control; HDBaseT receives a signal from a compatible transmitter. Identify labels and equipment at both ends.
Send the transmitter model and proposed path. We can review the link and prepare a direct connection test for comparison.
What if the picture is positioned correctly but text is not sharp?
Check a pattern and representative slide at center/edges. Record focus, position and settings; prepare optical adjustment using the unit procedure before changing content or support.
Share a photo and approximate distance. We can guide a test that separates focus, framing, and text size.
Does short throw allow any position without shadows?
Lens position, surface, and people’s movement need review. Zoom, optical lens shift, and digital correction serve different functions; they do not make every position valid.
A side photo and approximate dimensions let us compare layout, usable image size, or other documented optics. Testing should include center and edge focus and the presenter’s actual route.
What should we request for videos and laptop changes during a show?
Describe sources, changeover cues, audio, and who controls playback. The projector receives the image; source changes and sound need defined paths and operation.
We can evaluate rental or purchase, screen, installation, configuration, signal and operation in Argentina. Start with date, venue, audience and content; complete dimensions/setup with the venue. A sample helps agree rehearsal and readability acceptance.
Checks by symptom
| Symptom | Check | What it helps distinguish |
|---|---|---|
| Image outside screen | Dimensions, format, and placement. | Optics or content. |
| No extended signal | HDBaseT port and transmitter. | Path or selection. |
| Unclear text | Focus pattern and slide. | Focus or readability. |
Limits and precautions
Keep ventilation and beam clear; do not look toward the operating lens. Review mounting with the projector manual and exact mount.
Do not open the projector or work on its laser source. Repairs require qualified personnel.
Define screen surface and room lighting through a test. Nominal brightness alone does not set screen size or audience capacity.
Preliminary geometry before surveying the installation
Preliminary example: optical distance ≈ width × throw ratio. For 3 m width, LU935ST estimates 2.43–2.67 m and LH850ST 1.497 m, about 1.50 m. Verify optical reference, offset, height, focus, body and clearance against unit/manual; this is not an installation measurement or approval.
| Path | What to compare | What to confirm with production |
|---|---|---|
| Format and content | LU935ST: WUXGA 1920×1200, 16:10. | Prepare margins/layout per destination; check text/proportions without stretching. |
| 3 m image, example | 0.81–0.89:1 throw; estimate 2.43–2.67 m. | Zoom, focus and lens shift with position/clearance checked. |
| Extended signal | Two HDMI, video/audio HDBaseT and control LAN. | Identify transmitter/receiver; direct test then transport with audio. |
Record the room survey and readability test
Use the existing worksheet for image, optical-reference distance, height, back row, light and content sample. Add mount, walking routes, source/format, sound, rehearsal, operator and readability/focus acceptance owner.
Download projection and readability worksheet
Use not yet defined and complete details later. The worksheet downloads blank; retain your copy and describe the need in Contact. Preparing a worksheet or draft does not send an enquiry.
Continue with the production segment you need
Each guide retains model-specific connections and limits. Compare the handoff and each supplier’s contribution.
Official documentation by model and edition
Official LU935ST specifications consulted for resolution, geometry, zoom, lens shift and connections. Use ST-specific documentation for installation/adjustment; separate optics, format and digital correction.
Documentation consulted
Review: October 30, 2026. Official specifications consulted and own geometry estimate checked. No physical installation, room/latency measurement or picture test performed.
