info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

← Back to guides and resources

Reference documentation · Video, LED and playback

Videohub 40×40 12G: route sources to each destination

Organize SDI routes for displays, switchers and recorders. Identify where distribution, conversion or production switching is required.

These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.

Let’s plan the picture and audio paths

Tell us what each audience should see and hear and what your team provides. We can prepare equipment rental or purchase options, connections, configuration and operation for your project in Argentina. Start with the idea; dates, venue and models can follow.

What to prepare for a quote

Separate client or venue equipment from items you need to hire. File and graphic preparation, installation and cabling, configuration, rehearsal, operation and removal are agreed in the proposal scope. Identify who delivers each source and who confirms received picture and audio at every destination.

Model and use

Videohub 40x40 12G is a routing matrix: it selects which input reaches each output. A source can feed several destinations; transitions and compositions require the production equipment for that task.

The model supports different signal standards simultaneously. This does not mean it converts each source to a receiver’s format or synchronizes sources together.

Video, audio, and control

Routing
40 inputs and 40 12G-SDI outputs. Label both ends: camera, program, or playback as source; monitor, switcher, or recorder as destination.
Signal
Output reclocking, without input resynchronization. The receiver must support the selected source format; also check embedded audio.
Control
Front panel buttons, knob, and preview display; external Ethernet control and software configuration. Select the correct router before changing a crosspoint.

What to prepare

Prepare a source/destination table, formats, and audio paths. Identify on-air outputs and routes available for rehearsal.

Start with a partial equipment list. We can map routing and identify conversion or synchronization needs before the final plan.

Basic preparation

  1. Confirm model, firmware, and control software. Preserve the installation crosspoint table and labels.
  2. Check a source on a compatible receiver and connect it to the assigned input. Use suitable cable for signal and distance.
  3. Select the intended destination first, then its source using the chosen control. Confirm the picture at that destination.
  4. Check every route with actual format, audio, and destination. A correct router preview does not confirm that the entire downstream chain is working.
  5. Rehearse source changes and receiver recovery before using the route on air. Separate operational routing from configuration or firmware changes.

Technical questions and show decisions

The source appears on Videohub, but the destination has no picture: what should I check?

Check output assignment, cable, and receiver-supported format. A UHD source does not become HD by passing through the router.

If another format is needed, prepare suitable conversion and verify its output before revisiting the crosspoint.

Do reference or reclocking guarantee a clean switch?

This model’s specifications list no input resynchronization. Reclocking and reference are not a frame synchronizer.

For visible live changes, rehearse sources and receiver or transition in the production system prepared for that task. Do not assume CleanSwitch functions.

Why can I route but not change settings?

Crosspoint control and configuration are different functions. Identify application, version, connection, and selected router.

Preserve settings and check version documentation before updating or restarting. A ping reply does not establish access to every administration function.

When should I rent a router, and when do I need a production switcher?

A router assigns sources to destinations. It helps organize camera, program, and playback paths without repatching cables for every assignment. If the change is visible to the audience, define the intended result and rehearse each receiver’s recovery.

How do I prepare different screen, recording, and streaming routes for the same show?

Start with destinations and what each should receive: program, a camera, or playback. Add supported format, embedded audio, and whether the route stays fixed or changes during the show. Test each output at its receiver, including any required conversion.

Checks by symptom

Blackmagic Videohub 40x40 12G
SymptomCheckWhat it helps distinguish
No destination pictureCrosspoint, cable, and receiver format.Routing or compatibility.
Pause on source changeSynchronization and receiver recovery.Switching or downstream processing.
No Setup accessApplication, version, and connection.Administration or crosspoint control.

Limits and precautions

Label critical outputs and agree which routes may change during operation. A crosspoint change affects its selected destination.

Schedule disconnections and updates outside event operation. Save the configuration and prepare a recovery procedure before changing versions.

Prepare cooling, rack support, and power for the equipment. Dual power supplies require an appropriate system power design for redundancy.

One worksheet for room, speaker and stream

Write one row per destination: required picture, audio, known format, connection and person responsible. Use “not yet defined” for missing details. The download is a blank worksheet; downloading it or opening Contact does not send an enquiry.

Download editable destination worksheet (.txt)

Questions for preparing an enquiry

Can I enquire before choosing a switcher or router?

Yes. Describe the audience, displays, cameras and stream. We can help define what to combine, what to distribute and which services to hire. Dates, connections and models can be marked “not yet defined”.

What do we agree before calling the signal ready?

A test at each receiver: room display, speaker return and application or recorder. Agree who operates changes and who checks received audio and picture, along with the plan for a missing source.

Model sources and documentation

Open the manufacturer specifications and support pages to choose your model’s manual and edition. This integration links official documentation and preserves the library’s existing PDFs.

Documentation consulted

Document review: October 30, 2026. V-160HD: product, buses, USB, stills and 3.60 notes. Videohub: 40×40 12G specifications. Check the actual system firmware and configuration before rehearsal.

Let’s prepare your event system

Tell us what you want to show, hear or light and what your production already provides. Start with the idea and add models, dimensions and schedules later. Mention the model or guide in your message; the related service is selected in Contact.

Enquire about equipment and servicesView the related serviceEvent preparation guide