info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

← Back to guides and resources

Reference documentation · Sound

Allen & Heath Avantis Solo: Shows, scenes and configuration

Prepare the Show and scenes for running-order changes. Separate patching, the active Mix and enabled functions on the Avantis Solo used for the event.

These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.

Equipment and operation for your event feeds

Tell us what the audience needs to hear and what stage, remote call and recording receive. Request sound equipment, setup, preparation and operation from Eventos Globales for conferences, presentations and shows in Argentina. Start with the running order and what the venue or production supplies; complete models, connections and schedules later.

Received file and operator changes

For an event receiving other operators’ files, identify what stays and what changes between scenes. Separate supply, file review, patch preparation, rehearsal and operation. Start the proposal with sources and destinations before the Show is finished.

Model and application

Surface
12 faders
Engine
96 kHz
Local analog I/O
6 inputs / 6 outputs
Expansion
2 optional I/O slots + SLink
Control
Network / Director

Identify Solo, firmware, dPack and any Ultra hardware. Verify enabled processing capacity on the unit.

Connections and required equipment

SLink connects documented remote I/O; Network serves control. Dante requires the corresponding installed option card. Identical RJ45 sockets do not establish protocol compatibility.

Prepare the system

  1. Save the current User Show before recalling another Show.
  2. Record expander models, link sequence and installed cards.
  3. Check link/error indication, I/O patch and one controlled audio path.

Questions and troubleshooting

The expander has a link: why is there no audio on the channel?

A physical link is only the first check.

  1. Verify the expander protocol and supported topology.
  2. Check the input assignment in I/O and compare the preamp and channel meters.
  3. If preamp metering responds but the assigned channel does not, compare the input crosspoint; if both respond, continue through bus/output. Verify the same source at its destination after the agreed correction; unsupported or unidentified expander chains require Allen & Heath support before rewiring.
Why do faders change monitor levels instead of the main mix?

Check the active Mix.

  1. Read the active Mix indication and strip function.
  2. Return to the intended mix before adjusting; verify assignments and send levels.
  3. In the intended Mix, the strips must control the expected levels. Verify one small agreed change in rehearsal, then restore it and confirm the monitor/main feeds remain correct. If the role is unclear, stop fader moves and have an experienced operator identify the active mix.
Why are expected channels or effects absent?

Check channel placement on a layer separately from the availability of a licensed feature.

  1. Check strip assignment, firmware and enabled add-ons.
  2. Compare the matching reference guide; do not load a template or install an update just to see whether it fixes the problem.
  3. If a channel exists but is absent from the layer, correct only the intended strip assignment. If the feature is not enabled or support is uncertain, record license, firmware and hardware for support; do not load another show to test entitlement.

Choose the next check

Choose the next check
ObservationNext checkWhat to record
Link without audioProtocol and input patchExpander, source, channel
Unexpected level changeActive Mix and strip modeSelected mix
Missing featureVersion, add-on and layoutEnabled capability

Precautions

  • Keep control networks and audio links wired according to their documented roles.
  • Shared gain and phantom changes can affect another console.
  • Use the documented Power Down procedure; avoid firmware changes during operation.

Speaker changes with controlled recall

  1. Prepare scene order, speaker sources and destinations that must continue. Save User Show and list expected changes per step.
  2. Review Global Safes and per-scene Recall Filters. Protecting channel processing does not necessarily protect preamp, phantom or patch. Check actual parameters in the installed-version guide.
  3. Rehearse two consecutive scenes with protected outputs; check local speech, remote and recording. For an unexpected destination change, identify parameter and filter before recalling again.

Save the system before loading another Show

The Avantis Solo guide distinguishes Show recall from scene recall. A Show can replace bus configuration, layout, parameters, scenes and libraries. Preserve the current User Show and agree a rehearsal window before loading another file. Compare the received system with planned connections and feeds.

Compare file requirements with the available unit

Record firmware, dPack, cards and hardware variant, including Ultra where applicable. Compare functions used by the file with those enabled on the unit. Prepare another path or adjust scope if a function is missing; loading a file does not install a card or activate an option. The quote separates equipment, preparation and operation.

Preparation decisions

Do loading a Show and recalling a scene have the same scope?

Check file type and intended operation before confirming. A Show can replace system configuration and memories; scene recall depends on Safes and Recall Filters. Save recovery and rehearse the transition.

Why does moving a fader change a different mix?

Identify selected Mix, strip function and assignments before adjusting. With the operator, test a small agreed change and restore it. Check house and monitors separately; fader position alone does not identify the controlled destination.

Prepare the proposal and operator handover

Share city, date, running order and approximate source count. Identify venue-supplied items and tasks to delegate: equipment, setup, configuration, rehearsal or operation. Leave unknowns undecided. The worksheet is optional; downloading or completing it does not send an enquiry.

Download the USB, received-file and feeds TXT worksheet

Can I enquire before choosing a console or completing the file?

Yes. Tell us who speaks or plays content, who joins remotely and which destinations need audio. We can prepare alternatives and complete models, tasks and tests with your production.

Continue with the file and sound feeds

Official model references

Consult the specific Avantis Solo guide and official scenes and dPack sections. Identify hardware variant and enabled functions before applying a file’s scope.

Documentation consulted

Document review: October 30, 2026. Official model-specific references and editions; no equipment changes or inventory verification performed.

Let’s prepare your event system

Tell us what you want to show, hear or light and what your production already provides. Start with the idea and add models, dimensions and schedules later. Mention the model or guide in your message; the related service is selected in Contact.

Enquire about equipment and servicesView the related serviceEvent preparation guide