info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

← Back to guides and resources

Reference documentation · Video, LED and playback

NovaStar MX40 Pro: VMP, receiving cards and signal

Prepare the COEX system from receiving cards and panel configuration through layers and port distribution. Identify VMP, firmware and operating mode before calculating capacity.

These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.

Features and their implications

  • 20 Gigabit Ethernet outputs and 4 optical 10G ports.
  • Up to 9 million pixels and four 4K layers in Specifications V1.5.1.
  • 3 HDMI 2.0, DP 1.2 and 12G-SDI inputs; VMP/COEX platform.

V1.5.1 data. Confirm the installed version and receiving cards before applying these capabilities to an actual system.

Load depends on frame rate, bit depth, receiving cards and configuration. Maximum width and height must not be combined as an available resolution.

Video, LED data and control

Inputs
Three HDMI 2.0 inputs with loop-through, one DP 1.2 and one 12G-SDI with loop-through. Supported resolution and frame rate depend on the input; an advertised maximum does not apply to every format, sampling and bit-depth combination.
LED outputs
Twenty Gigabit ports and four 10G optical ports. Documentation distinguishes optical modes with 20 and 40 logical ports: these are not four unrestricted additional banks or a guarantee of doubled device capacity.
Control and reference
Two Ethernet control ports, Genlock with loop-through and an auxiliary port. LED data and control ports serve different functions. Optical transport requires modules and converters compatible with the path.

System requirements

Mutually compatible VMP, controller firmware and receiving cards. The current table includes A5s Plus, A7s Plus and specified A8s/A10s families; A5s is not the same as A5s Plus. Identify the cabinet’s exact card.

Correct panel configuration file and revisions. For NCP-based functions, verify receiving card, driver IC and the file supplied for that cabinet; matching pixel pitch alone does not justify loading a file.

Pixel and cabling plan per port, output frame rate and bit depth. Published total capacity is up to 9 million pixels, while per-port limits and mapping capacity losses must also be met.

Basic preparation

  1. Record VMP, controller and receiving card versions, cabinet file and cable map. Preserve configuration and coefficients before changing the system.
  2. Check detected video under Input Settings > source > Infoframe: resolution, frame rate, bit depth and gamut. Then compare EDID, layers and scaling with the content.
  3. Calculate each port’s load for the actual frame rate and bit depth. As a documented reference, 8 bit at 60 Hz has a nominal limit of 659722 pixels per port, subject to all other conditions and the total limit.
  4. Assign cabinets and cabling direction in VMP. Check mapping with a suitable pattern and verify optical mode, converter and backup paths before relying on them.
  5. Compare presets, correction and receiving card status. Validate preset recall and system recovery in a controlled test; a visible change alone does not prove persistence.
The LED map exceeds available capacity despite free connectors: what should I check?

Separate the controller’s total limit from per-port load. Load depends on frame rate, bit depth, receiving card and distribution; adding every port’s nominal maximum does not yield guaranteed device capacity.

Also review load-area and mapping losses in the current specifications. Optical mode changes distribution without removing those limits.

Can I move a NovaLCT panel to MX40 Pro without reviewing files?

Identify receiving card and driver IC first. COEX uses VMP and has its own requirements; compatibility with another NovaStar controller does not prove complete MX40 Pro compatibility.

The NCP guide allows .rcfgx use in certain migrations, but VMP cannot edit it. Advanced functions need a compatible combination and suitable NCP; check the file against cabinet documentation before updating.

Why does correction change after a preset recall or restart?

Record what changes, the recalled preset and VMP, controller and receiving card versions. Compare brightness, gamma, color temperature, parameters and coefficients as separate items.

Preserve a copy and test one variable at a time. If the change returns, compare the preset with the receiving cards’ effective parameters before recalibrating or changing firmware.

Checks by symptom

NovaStar MX40 Pro
SymptomCheckWhat it separates
Input detected, incorrect imageInfoframe, EDID, layers and scaling.Input and composition.
Port overloadedPixels, frame rate, bit depth and receiving card.Per-port and total capacity.
Cabinet incompatibleExact card, driver IC and file.System brand and actual compatibility.
Change after presetParameters, coefficients and versions.Preset and persistent correction.

Limits and precautions

Advanced functions do not work with every receiving card. The current table states that Low Latency cannot be enabled with Genlock, 3D or Frame Multiplication.

Do not work on energized fiber or improvise optical modules. Follow the manufacturer’s procedure and verify mode and port numbering before connection.

Preserve panel coefficients and verify the cabinet file before changing color or mapping. An update requires compatible versions and a recovery procedure.

Continue with your system controller or files

Manuals and editions

Check the stated model, edition and language at the manufacturer’s source. Verify the document edition and installed software version separately.

Documentation consulted

Document adaptation: October 29, 2026. Check your system model and version before applying changes.

Let’s prepare your event system

Tell us what you want to show, hear or light and what your production already provides. Start with the idea and add models, dimensions and schedules later. Mention the model or guide in your message; the related service is selected in Contact.

Enquire about equipment and servicesView the related serviceEvent preparation guide