Recording, playback and production integration
Tell us what you want to retain or show and what your team supplies. Ask Eventos Globales about video equipment rental, purchase and integration, preparation and operation in Argentina. Start with date, city and intended delivery; the proposal defines equipment, media, tasks and responsibilities.
Record program or play a prepared file
To retain a talk, identify program output and the audio required in the file. To play videos on a screen, define file, cue, output and operator. If recording must continue during clips, prepare separate paths and rehearse both tasks. Distinguish equipment, preparation, operation and file copying in the proposal.
Model and use
Blackmagic HyperDeck Studio HD Plus is a video recorder and player for camera or program signals. It can record a system output and play prepared event clips.
Despite HD in its name, it supports ProRes up to 2160p30. This is the Plus variant with 6G-SDI; Studio 4K Pro capabilities and HD Pro internal drive bays do not apply.
Signal, formats, and media
- Video
- Selectable SDI and HDMI 2.0 inputs. SDI A/B and HDMI outputs; a separate 3G-SDI monitoring output with overlays. Distinguish monitoring from the signal being delivered to the system.
- Formats
- ProRes HQ, 422, LT, and Proxy up to 2160p30; H.264 up to 1080p60. ProRes 4444 is playback only, with fill/key over SDI A/B up to 1080p60. Ultra HD fill/key is unavailable.
- Media and control
- 2 UHS-I/UHS-II SD slots and external USB-C recording. 1 Gb/s Ethernet and RS-422 control. Embedded audio: 16 SDI channels and 8 HDMI channels.
What to prepare
A supported input, suitable cabling, and manufacturer-approved media for the chosen format and codec. A card’s advertised speed does not replace this check.
A monitor and audio monitoring to inspect the file; sufficient space and planned duration. For critical recordings, plan a backup path and rehearse recovery.
Agree on mixed program or separate ISO sources. Retaining sources separately requires independent capture paths in the design; copying the program file afterward does not create those recordings. Also define backup, codec, audio and transfer: available duration and runtime must be checked with the actual configuration and media.
Basic preparation
- Identify the variant and note firmware, input, resolution, frame rate, codec, and media before rehearsal.
- Select SDI or HDMI in Record > Input or with the Input button. Check clean video and embedded audio at the source.
- Choose a supported codec: ProRes up to 2160p30; H.264 up to 1080p60.
- Check media against the official list. If formatting is required, back up its contents and identify the exact medium: formatting erases files. exFAT works with Mac/Windows; HFS+ is native on Mac.
- Record a sample, stop, and play it back. Listen to audio, check duration, and inspect the file in the delivery workflow before the event.
Signal, recording and delivery questions
The recorder does not show the show feed. What should we check before pressing REC?
Compare the SDI/HDMI selection and actual source format with the formats supported by HD Plus. A connected cable does not confirm that the right input is selected.
The HDMI input cannot capture copy-protected sources. Also check that the camera sends clean video: its graphics can be recorded.
Before calling recording ready, agree on the picture and audio required in the file and inspect a sample played at the delivery destination.
What should I check if REC flashes or frames are dropped?
The manual associates this warning with media or network speed problems. Note codec, format, media, and warning before changing settings.
Check the exact media model and capacity against the official list for that mode. Test the entire chain; one successful short test does not establish that a freeze is resolved.
Can I play a transparent file as fill/key?
HD Plus plays ProRes 4444 with fill and key over SDI A/B up to 1080p60. This does not provide ProRes 4444 recording or Ultra HD fill/key.
Prepare a compatible file and check picture and key separately on the receiving switcher. A file opening on a computer does not establish deck compatibility.
Can we record the show and play clips with the same unit?
HD Plus documents recording and playback functions; its connectors do not establish that every simultaneous combination is supported. First define whether clips and recording must run concurrently and which input and output signals each task requires.
If we record the program, can we edit each camera separately later?
A program file preserves the feed selected for recording. Copying that file preserves the same cuts; it does not recover the other cameras. A multiview picture is also not a set of independent camera files.
Checks by symptom
| Symptom | Check | What it helps distinguish |
|---|---|---|
| No picture | Selected input and source format. | Input selection versus unsupported signal. |
| REC flashes | Mode, approved media, and path speed. | Recording versus a throughput bottleneck. |
| No transparency | ProRes 4444, A/B outputs, and receiver settings. | File versus key routing. |
Limits and precautions
Do not remove media or interrupt power during recording. Stop and check the file before moving it.
Do not assume the deck converts every incoming signal to any format. Check source, mode, and receiver as a chain.
Record the version before updating and rehearse outside the event. User reports do not establish a cause or justify an undocumented firmware change.
Prepared file is missing or will not play
Distinguish file, media, and output
Record HD Plus version, filename, container, codec/profile, actual resolution/rate, media and selected deck format. A .mov or .mp4 extension alone does not describe those parameters. Keep original and export version for comparison.
Separate unrecognized media, missing clip and playback that fails at the receiver. Compare a known sample recorded by the same deck/mode; do not format media holding needed files just to test recognition.
The manual instructs matching the selected codec for playback in the LCD menu. Check that setting against the file and HD Plus specifications. Convert a copy to a documented format when needed, preserving original; renaming an extension does not convert video.
Playback rehearsal and show alternative
Use the actual unit/output: first frame, cue start, sound, full running time and ending. For transparency retain the fill/key checks on this page. Record accepted file/configuration; Playback on a laptop alone does not confirm that the file will play correctly on the deck.
For late material, assign conversion and retest responsibility with an approved fallback version. For varied formats or late changes, compare a prepared computer/server with suitable output and operation. Keep independent recording if it must continue.
Does renaming .mp4 to .mov make it compatible?
No. Check codec/profile, resolution, rate and container, then convert to a documented format if needed while preserving original.
What test confirms that a clip is ready for the show?
Play it fully through intended deck, media, output and receiver. Check cue start, picture, sound and ending; record file version and settings.
Choose finished program or sources for editing
Program retains the camera selection made live. To change shots later, add isolated files of the required sources. For playback, test the full file on HD Plus and its receiver; opening it on a computer is a separate check. Define format, testing and delivery around the intended use.
Prepare equipment, operation and delivery
Can we discuss rental or purchase before knowing the codec?
Yes. Start with date, city, duration and intended use of the file or clip. Compare equipment and preparation according to usage frequency, existing system and required operation. Complete format and media with production before rehearsal.
What should we agree when videos change close to the event?
Who receives the final file, who prepares it and who approves the system test. Define playback preparation and operation, an approved reserve version, and the scope of recording and copying. State the required delivery time so those tasks can be quoted.
Start with the delivery you need
Share city, date, approximate duration, available sources and what you want to receive or play. State equipment, preparation, operation or file-copying needs. Complete models and formats later. Contact arrives with Video and cameras selected; include this guide name in your message and review the draft before sending.
Compare recording, switching and streaming
Model documentation and manufacturer support
The official specification distinguishes HD Plus from HD Mini, HD Pro and 4K Pro, and provides access to the family manual and media lists. Check the HD Plus section and software version before preparing a file or choosing media.
Documentation consulted
Checked October 30, 2026: official HD Plus specification and recording, playback and connection sections in the original February 2026 manual supplied in the kit. Not every page was reviewed and no unit was tested.
