Let’s design your conference shots
Tell us who speaks, where they move and what must appear in the room, video call or recording. We can compare camera rental or purchase and preparation, installation, configuration and operation services in Argentina. Start with photos, a sketch or the schedule; models and distances can follow.
What we define for a quote
Separate camera, support and installation, power, signal, control and operator. Agree position, coverage during movement, preset caller and picture/audio acceptance. When the production supplies a UE40, check the variant, receiver and required adaptations.
Two decisions before installation and preset preparation
Model and connections that affect scope
AW-UE40 is a PTZ camera with a 24x optical zoom, HDMI 4K formats up to 29.97p/25p, and USB or IP video. It has no SDI output; check that you are specifying UE40 rather than UE50. Power is supplied through 12 V DC or PoE+; USB does not power the camera.
For SDI switching, compare compatible HDMI conversion with a native-SDI camera. List output standard, receiver format, cable and converter power. For USB or IP, confirm the specific mode and receiving app; a shared connector does not establish identical formats on every route.
Prepare panel, speaker and coverage
Mark lectern, panel and movement route. Test wide and close shots from the intended position with people seated and standing. Define which camera stays on air while the PTZ moves and who confirms the next shot is ready. Presets help prepare repeatable framing; one camera does not provide simultaneous angles.
Plan installation and operation separately: follow the manufacturer’s mounting instructions, provide stable support and movement clearance, and identify power, video and control connections. The manual distinguishes Desktop and Hanging installation. Do not connect PoE to RS-422. Agree on who approves the camera position and prepares its support before making connections.
Rehearse a change from the moderator to a panelist, a person standing up, and a return to the lectern. Record the program feed and review focus, framing, obstructions and any camera movement shown on air. For unpredictable action, compare dedicated camera control or a camera with an operator alongside the PTZ setup.
Compare a preset with its rehearsal reference
Before overwriting memories, save configuration and a sample of the mismatch. Identify selected camera, preset number, controller and rehearsal reference. Compare base position, support, orientation and chair or lectern location; do not assume memory alone changed. Do not turn the head by hand.
Repeat one identified preset off air with the same reference subject. Note direction, shot size, focus or exposure differences. Displaced framing and changed brightness call for different comparisons. If all movement is reversed, review installation orientation and controller reversal in their manuals.
If position and mounting match rehearsal but recall changes another condition, record version and affected settings. Compare them with that version’s operating manual before changing recall scope or firmware. Retain the wide shot and starting state to restore useful coverage.
What a proposal can include
We can prepare a rental or purchase proposal and installation, integration, configuration and operation services. Start with date or timeframe, venue, people on stage and picture destination. Then complete positions, formats, contributions, control and rehearsal; a final floor plan is not needed to enquire.
Can UE40 connect directly to an SDI input?
This variant needs a compatible route from its output to that receiver. Evaluate conversion with defined formats and power, or another camera; rehearse picture and audio at the destination.
Should every preset be overwritten if one changes?
Retain the earlier state and compare one identified recall with its rehearsal reference. Confirm camera, memory, position and scene conditions before modifying others.
Does a saved shot cover a walking presenter?
Test the entire movement and its operator. Define coverage for a loss and compare manual tracking, another preset or an operated camera for that action.
Can I inquire without a selected model or final floor plan?
Yes. Date or timeframe, venue and what you need to show are enough to begin. Distances, sources, control, staffing and tests can follow when comparing scope.
Choose connections from receiver and purpose
| Path | What to compare | What to confirm with production |
|---|---|---|
| HDMI | UE40: 2160 up to 29.97p/25p; match the receiver format. | Resolution, refresh rate, cable and picture destination. |
| SDI receiver | UE40 has no SDI output; define conversion or another camera variant. | Conversion format and power; received picture and audio. |
| USB / IP / control | Choose mode and receiving app; specifications distinguish LAN and RS-422. | 12 V DC or PoE+ power; USB does not power the unit. |
Retain the plan and per-destination acceptance
Use the existing destination worksheet and add positions, camera/preset numbers, framing reference and coverage shot. Record results with planned people and light and who may overwrite memories.
Download the existing destination worksheet (.txt)
Use not yet defined and complete details later. The worksheet downloads blank; retain your copy and describe the need in Contact. Preparing a worksheet or draft does not send an enquiry.
Continue with the production segment you need
Each guide retains model-specific connections and limits. Compare the handoff and each supplier’s contribution.
Official documentation by model and edition
The official table compares UE40/UE50/UE30: use UE40 columns and notes. Excerpt DVQX2238YA covers Desktop/Hanging installation and precautions; check recall settings against the installed version’s operating manual.
Documentation consulted
Review: October30,2026. Official table and relevant DVQX2238YA text consulted. No installation, camera control or physical rehearsal.
