info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

← Back to guides and resources

Reference documentation · Sound

Shure MXW neXt 2: prepare microphones, modes and calls

Plan two wireless channels with an APXD2 base and compatible transmitters. Separate power, USB audio, call sends and room listening.

These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.

Equipment and preparation for your meeting format

Tell us city, date and how people will participate: moving presenters, shared microphones or stations with managed turns. Ask Eventos Globales about sound equipment rental, purchase and integration in Argentina. Define equipment, installation, preparation and operation from the idea and venue resources.

Prepare two mobile voices and the room connection

For training or presentations, compare microphone type, simultaneous voices and destinations: audience, call and recording. The proposal identifies base, transmitters and accessories, mode preparation, rehearsal and personnel. Request the part you need to integrate with production.

What it is and when it helps

Assess MXW neXt 2 as a two-channel system: MXWAPXD2, compatible transmitters and audio destinations. Do not transfer four- or eight-channel configurations to it.

Connections and components

MXWAPXD2 combines charging for two MXW1X, MXW2X or MXW6X transmitters, IntelliMix DSP and USB-C, analog and Dante connections. Identify the package contents and power supply.

Local presenter and remote participants

Map who must hear whom. Separate local microphones sent to the call from remote audio returning to loudspeakers. Select the operating mode and review its routing; avoid sending the remote return back to itself.

Proposal options

  • Initial option: Assess two compatible microphones with the existing computer and loudspeakers.
  • Expand the scope: Mode, routing and charging preparation plus a test call and agreed support.
  • Another alternative: A simple wired setup or a higher-channel system if the format needs it.
  • For a quote: Date, room, simultaneous voices, computer/platform and available loudspeakers.

Prepare before the event

  1. Inventory base, transmitters, power, cables and versions.
  2. Plan charging, linking and placement using the regional manual.
  3. Select computer input/output and check the operating mode.
  4. Test local speech, remote speech, playback and mute with an offsite participant.

Room and remote: build two audio paths

Proposed scenario: training with two local microphones, a laptop and remote participants. Send the intended local voices to the call without returning the remote participants’ own voices. Send the far-end return to room listening. This is the mix-minus principle; AEC addresses acoustic echo rather than an incorrectly routed electrical return.

For APXD2 in Presentation or Conference, the guide identifies USB Output as the local mix and Analog Output 2 as far-end only. Choose output and mode after defining destinations. If local reinforcement is also needed, assess the full-mix path and gain before feeding loudspeakers.

If a TV plays remote audio outside the usual path, review the documented Conference AEC reference. Never connect an amplified loudspeaker output to a line input. Confirm level and interface.

Isolate the fault and define the service

  1. Start at each microphone: charge, link, mute and channel meter. Changing the conferencing USB input does not fix an RF dropout.
  2. With local signal present, check the call input device. Ask a remote participant to speak and check computer output and room listening separately.
  3. If the remote participant hears their voice with local microphones muted, inspect return routing into the call. If it depends on loudspeaker sound reaching microphones, inspect AEC reference and playback. This is a proposed diagnostic, not a physical test already performed.
  4. Agree the signal map, test call and recovery responsibility for the planned use.

Questions and answers

Do two channels mean only two participants?

They are two wireless channels, not a room capacity. Shared microphones may or may not suit the turn-taking, movement and acoustics; test every position.

Are microphones and loudspeakers included?

The base does not establish package contents. Identify transmitters, capsules, power and sound reinforcement; it is not itself a conference loudspeaker.

Does USB-C complete the call setup?

It provides audio integration, but the computer must select the device and permissions. Check remote playback, levels and application mute too.

Why does the remote participant hear echo?

Compare return routing, AEC references and selected mode with the manual. Test one path at a time rather than adding duplicate feeds or processors.

Does automix replace an operator?

It assists microphone management but does not manage turns or confirm coverage and battery readiness. Assign mute, level and replacement monitoring.

Can Direct be used like Conference?

The guide distinguishes modes: Direct disables internal automix and AEC. Define where processing occurs if using it; do not switch modes as a live diagnostic.

Are mix-minus and AEC the same?

No. Mix-minus prevents returning a source to its own destination; AEC reduces acoustic echo using an appropriate reference. Review both paths before adding processing.

Why do receiver meters move but the call hears nothing?

Follow receiver, selected output, application input device and mute. If the local meter responds, check the next stage before relinking all transmitters.

What if we need more simultaneous voices?

Compare shared microphones with managed turns, more channels or a discussion system. Choose by simultaneous speech, movement and acoustics rather than attendee count alone.

Identify the APXD2 port and mode

MXW neXt guide 3.7 (2026-J) separates the USB-C POWER connector from USB-C Audio. It specifies a 5 V, 3 A supply for APXD2; check the actual unit and intended supply. In Presentation and Conference, USB Output carries the local mix and Analog Output 2 carries far-end audio. Direct and Custom need their own maps; Custom has no preselected matrix crosspoints. APX4/8 tables apply to different models.

Start the enquiry and define the service

Can we request a proposal before choosing transmitters?

Yes. Tell us who speaks, whether they move, what they hold and which destinations need audio. City, date and an approximate format allow us to compare options and complete models and accessories during preparation.

What can we request if the venue already has sound?

Assess microphone supply and integration with the existing system. Tell us venue resources and the equipment, connection preparation, test call or operation you need. The proposal identifies contributions and listening checks.

Start with people and the running order

City, date, participants and meeting format allow a first enquiry; complete models and connections later. Identify contributions and equipment, preparation or operation needs. Contact arrives with Sound selected; mention MXW neXt 2 or MXCW640 in the message. Review and send the enquiry separately from the working worksheet.

Record rehearsal and audio feeds

Use the optional speech rehearsal worksheet for intervention, positions, destinations, owners and outstanding tasks. Add layout and roles for a discussion table, or the send/return map for a call.

Download speech rehearsal worksheet (TXT)

Compare pickup, processing and participation format

System and model documentation

Reference: MXW neXt guide 3.7 (2026-J), English, 96 pages, original already in the kit. APXD2 preparation, ports, modes and routes were reviewed. Kit Spanish edition 1.3 (2024-G) and Portuguese 1.0 (2024-A) are earlier; identify document edition and firmware separately.

Documentation consulted

Document review: October 30, 2026. Selected sections checked by model. Complete preparation with listening, versions and each actual feed; use the rehearsal worksheet to record results and outstanding tasks.

Let’s prepare your event system

Tell us what you want to show, hear or light and what your production already provides. Start with the idea and add models, dimensions and schedules later. Mention the model or guide in your message; the related service is selected in Contact.

Enquire about equipment and servicesView the related serviceEvent preparation guide