Start with what each person needs to hear
Share city, date, program and a sketch of the space. Start with approximate dimensions and complete equipment, connections and schedules while preparing your event in Argentina.
Prepare a presentation and stage listening
If a presenter needs to hear videos, questions or walk-in music while presenting, define their feed and the audience feed. Eventos Globales can assess equipment, console sends, cabling, preparation and operation. Tell us what the venue supplies and what you need to solve; complete models, placement and connections with production.
Model and connections
Input A supports MIC/LINE; B supports HI-Z/LINE; C accepts 3.5 mm stereo and sums it to mono. Each THRU carries its corresponding input before channel gain and DSP. MIX OUT sums the inputs after their channel gains and before DSP. If another zone is quiet, identify its feed and compare the second speaker’s input and level before raising the first. Never connect an amplifier speaker output to these audio inputs.
Prepare and check
Identify K10.2 and firmware; use documented supports/configuration. Map source→input→output/destination, rehearse transitions and document recovery to the tested state.
Questions and decisions
How should speech and video be prepared?
Count simultaneous sources and assign compatible inputs; an adapter does not turn laptop stereo into balanced mono. Test speech alone and the actual video at protected levels, watch signal/clip and compare near/rear. Save preset, EQ, delay and sub filter first. If the rear lacks coverage while the front is excessive, review placement/distribution before raising level.
Does a monitor preset create a stage mix?
No. Prepare separate feeds when presenter and audience need different content. THRU or MIX OUT can share signals but do not create an independent balance. Review microphone pattern/placement, then suitable preset and feed content. Check stage and audience; we can assess extra console feeds, another cabinet or operation support.
Separate the room mix from stage listening
Record which content reaches the audience and what the presenter needs. Sharing one signal and preparing two different mix balances require different routes. Prepare the console and connections so each destination receives its program, then rehearse transitions with the actual files.
Prepare the scope of work
Can audience and stage receive different programs?
Yes. Tell us whether the presenter needs videos, questions, music or a specific reference. Assess console sends and equipment for each destination, with a program test before the event.
What do I need for a sound proposal?
Start with city, date, space, program and what the audience and presenter need to hear. Add any existing console, microphones or speakers; complete models and quantities later.
Prepare a proposal for your production
Enquire about equipment, preparation, setup and operation. Contact opens with Sound selected; mention HDL 6-A or K10.2 if relevant. Start with an idea and complete dimensions later. Review the message and send the enquiry when ready.
Prepare the speech and program test
Use the existing rehearsal worksheet to record sources, destinations, responsibilities and test results.
Download editable speech rehearsal worksheet · TXT
Compare other ways to deliver sound
Model manuals and references
K.2 manual TD-000523-01-G, 23 pages in English, covers K8.2, K10.2 and K12.2. Identify K10.2 and the unit version when preparing the system.
Documentation consulted
Checked October 30, 2026. Product page and initial manual reading accessible for model, applications, inputs and signal diagram. A later query timed out; detailed output review remains pending. THRU/MIX OUT explanations retain the frozen kit reference.
