info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

← Back to guides and resources

Reference documentation · Sound

Dante AVIO USB-C: computer, room and remote return

Prepare presentation or remote-participant audio by separating playback, the send to the call and the return to the room. The diagram helps locate an application selection or missing subscription before blaming the adapter for absent audio.

These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.

Model and documentation reference

This guide covers the Audinate ADP-USBC-AU-2X2 adapter. The 2024 USB/USB-C datasheet v.0124 specifies two input and two output channels, 48 kHz, 24 bit and RJ45/USB Type-C connections for the USB-C model. Do not apply the USB Type-A power column to USB-C or assume phone compatibility from connector shape.

Audinate · AVIO USB/USB-C · datasheet v.0124 · EN · pp.1–2

Event application

For a hybrid conference, draw three destinations: room audience, remote guest and recording. The guest needs the intended program send, while their own voice returns to the room along another path. Our proposed plan uses a send bus excluding that return and records who controls it. The adapter does not independently resolve console mixing or acoustic echo in the venue.

Two independent directions of audio

Two independent directions of audio
TaskSourceDocumented path
Presentation playbackComputer applicationUSB output → AVIO transmitter → Dante receiver
Send a mix to the guestSelected console busConsole transmitter → AVIO receiver → application USB input
Hear the guestCall application outputUSB → AVIO transmitter → room channel
RecordSelected recording busAVIO receiver → recording application input

Audinate · AVIO USB/USB-C · datasheet v.0124 · EN · pp.1–2

Identify host, network and power

USB-C connects a suitable host and RJ45 the Dante side; this is not a direct conversion between two USB peripherals or an Internet access adapter. The datasheet specifies Class 1 IEEE 802.3af PoE or USB power. Record the actual switch/injector and host. The getting-started guide uses Dante Controller for subscriptions; network discovery does not establish that the computer application selected this input or output. Do not change addressing on an operating network while searching for missing audio.

Audinate · Getting Started with Dante AVIO · 2026-07-29

Application selection and return mixing

Audinate explains that conferencing clients may present AVIO as a combined input/output device or allow separate microphone and speaker selections. Record both choices in the actual application and distinguish them from operating-system settings. If the remote guest hears a repeat of their voice, trace the return into the send bus: a duplicate software route and acoustic pickup are different issues. Verify the proposal through agreed listening at controlled levels rather than a routing checkbox alone.

Audinate · AVIO and Teams/Zoom clients · 2026-04-29

Prepare and verify both directions

  1. Record part number, host, operating system, application and observed version; preserve initial routes without passwords.
  2. Draw the three destinations and give distinct names to guest send, guest return and recording.
  3. Check documented power and synchronization; record transmitter, receiver and channels for each subscription.
  4. During an agreed rehearsal, check a known file toward its destination, then the mix toward the USB input. Observe meters at both ends.
  5. Check return, exclusion from the send and recording with the responsible people; retain results and restoration steps. Keep maintenance separate from the event.

Audinate · AVIO USB/USB-C · datasheet v.0124 · EN · pp.1–2

Frequently asked questions

Controller discovers it, so why is playback silent?

Network discovery does not select the application output. Follow program output, volume, AVIO transmission, subscription and receiver channel; record where the first meter lacks signal.

Do two channels guarantee a stereo call?

Adapter capacity does not determine the format a conferencing client uses. Confirm application, settings and destination separately through an agreed test.

Is the datasheet latency the total delay?

Dante device values of 1, 2 or 5 ms are configurable according to the datasheet. They do not include all application, processing, remote network or round-trip delay. Do not promise a total without measuring the path.

Can USB alone power a firmware update?

Audinate requires PoE during a USB-C update because its USB power circuit resets. This is a documented maintenance condition, not a recommendation to update during an event.

Can AVIO connect to another USB peripheral without a computer?

Identify the host role at both ends before choosing a cable. Two USB peripherals do not create that host on their own; check the specific interface and its documentation.

Follow the audio path

Download send, return and recording worksheet

Official edition-specific documentation

Audinate USB/USB-C datasheet v.0124, pp. 1–2: use the USB-C ADP-USBC-AU-2X2 column. Support references distinguish preparation, client selection and maintenance power. A document edition is not the installed firmware version.

Plan audio for your event

For conference audio planning in Argentina, share city, venue, computer/application, console, intended Dante network and room, remote and recording destinations. A preliminary diagram helps identify missing information; this guide establishes no stock or availability.

Enquire about equipment and servicesView the related serviceEvent preparation guide