Model and documentation reference
REV M, July 21, 2026, separates omega and sliding-clamp versions. The September 28, 2026 leaflet names them STROBE 3 IP and STROBE 3 IPS and prohibits mechanically joining different versions. Hardware, dimensions and mounting approval do not transfer. REV M lists 14 modes; the later leaflet lists 15, including 69. Retain that difference for actual unit/firmware reconciliation: this guide uses REV M modes, whose protocol section states validity from V2.4.
ACME PIXEL LINE IP · REV M · 21 July 2026 · EN · ACME PIXEL LINE IP · leaflet · 28 September 2026 · EN
Event application
For a production in Argentina, record quantity, position, orientation and each bar’s task: zonal color, white, effects or program support. Request exact model, variant, firmware and console profile alongside universe/address. For network control, identify the Art-Net/sACN source and network owner. The Pixel Line name proves neither video playback, stock nor Argentine availability; support, power and camera rehearsal require separate review.
ACME PIXEL LINE IP · REV M · 21 July 2026 · EN
Example footprints and highest starting addresses
| REV M mode | DMX footprint | Highest start in a 512-channel universe |
|---|---|---|
| 7 CH | 7 channels | 506 |
| 70 CH · selected reference | 70 channels | 443 |
| 70N CH · comparison | 70 channels | 443 |
| 125 CH | 125 channels | 388 |
Matching footprint does not match profile or zone map
The table uses 513 minus footprint; end address equals start plus footprint minus 1. These are planning calculations, not an applied patch. In REV M, relative channel 2 in 70 CH controls RGB strobe; in 70N CH it is dimmer fine, with RGB strobe on 3. The wrong profile may send a different function despite equal 70-channel footprints. The zone diagram shows 16 RGB and 16 white zones for 70/70N; 32-RGB groupings from other modes do not transfer. Record orientation and Invert Pixel Order separately from menu Display Invert.
ACME PIXEL LINE IP · REV M · 21 July 2026 · EN
Separate XLR DMX, network control and mounting
REV M identifies 5-pin XLR DMX IN/OUT with a 3-pin option, and Ethernet for Art-Net/sACN. Network to DMX is a separate documented option: it is not assumed active or inferred from an RJ45 connector. Record protocol, universe and owners at both ends without changing live IP addressing/networks. For zonal animation, define control source and map; Art-Net/sACN support establishes no video-file player. Omega fastening and mechanical joins need their own review, without performing installation from this worksheet.
ACME PIXEL LINE IP · REV M · 21 July 2026 · EN
Prepare by unit and personality
- Identify STROBE 3 IP omega against actual label, variant and firmware. Retain IPS units or mode 69 as pending until matched to exact documents.
- Select mode and matching console profile. Use 70 CH only as this sheet’s documentary reference; equal footprint does not justify replacing it with 70N.
- Calculate start, footprint and end for each unit. Record universe and intended/accidental overlaps; ensure the final address does not exceed 512.
- Draw bar/zone order and orientation; record Invert Pixel Order separately from Display Invert. Identify DMX or Art-Net/sACN path, power and owners.
- Agree on support review and profile, zone, signal-loss and camera tests. Do not power fixtures, patch consoles, change networks/settings, join units or update firmware for this preparation.
Frequently asked questions
Are 70 CH and 70N CH interchangeable?
No. They share footprint/highest start 443, but REV M assigns different functions: relative channel 2 is RGB strobe in 70 CH and dimmer fine in 70N CH. Use the exact profile.
How is the highest start calculated?
For footprint N within 512 channels, the maximum is 513−N: 443 for 70, 388 for 125. This checks the interval, not functions or actual patch.
Can mode 69 be used because the leaflet lists it?
The later leaflet includes 69 while REV M omits it from 14 modes. Confirm unit, firmware and protocol; no channel map is invented for that difference.
Does Ethernet make the bar a video player?
The manual describes Art-Net/sACN control and Network to DMX. That proves no video player or replacement for a zone map/control source.
Can omega and IPS units be joined under the same product name?
The leaflet separates STROBE 3 IP and STROBE 3 IPS and excludes joining different versions. Identify variant/hardware before mounting review; this guide approves no assembly.
Complete the lighting brief
Identified official documents
Existing official originals SHA verified: REV M manual July 21, 2026, and leaflet September 28, 2026. Only PDF positions 1–14, 16, 18–19, 21–25, 33–35, 44 and 48 were read in the 52-page manual; 9, 11, 21, 44 and 48 were visually inspected. Both leaflet pages were read and its second inspected visually. The separate DMX chart retains its official kit link but was not opened or claimed read. No local PDF was added.
