info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

← Back to guides and resources

Reference documentation · Video, LED and playback

PerfectCue Mini: slide control, operator and presentation backup

Choose how the talk advances: direct speaker control or cues to an operator. Prepare USB, the main presentation and backup.

These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.

Let’s prepare presentation control

Tell us who advances slides, whether there are videos and what the speaker needs to see. We can evaluate control rental or purchase and prepare connections, configuration, rehearsal and operator support. Identify what your production provides and which part you want to hire; models can follow.

What to agree for the proposal

Agree transmitter and receiver, supplied computers, final file and who monitors main and backup. Scope may include cue preparation, connection adaptation, configuration, rehearsal and operation. Confidence display, notes and timer are sized separately around the speaker’s viewing needs.

Model and scope

DSAN PerfectCue Mini, reference PC-MINI, sends visual and audible cues to an operator or controls a presentation through USB. It differs from PerfectCue Micro and the larger PerfectCue receiver.

Transmitter, buttons and receiver labels may vary. Identify each component before copying a configuration; Mini lacks the larger PerfectCue’s belt-pack intercom pass-through.

Video, monitoring and control

Radio and cues
Communication at 433.92 MHz with 256 DIP-addressed channels. Manufacturer nominal reference: 300 ft (approximately 91 m); check coverage from the actual speaker position during rehearsal. Confirm transmitter type and battery.
USB A and B
Two programmable USB connections control two computers. They appear as standard USB keyboards without special drivers. Delivery depends on enabled outputs and the active window on each computer.
Interconnection and power
RJ45 and XLR connect cue lights, carrying proprietary data and power. Do not connect them to Ethernet, PoE or audio equipment. Use the DSAN supply specified for the revision; USB operation does not power every linked accessory.

System requirements

A PC-MINI receiver and compatible transmitter with matching address and the battery specified for that transmitter. Mini does not determine button count.

USB cables and prepared computers, with the correct backup file and position. External power and compatible accessories when linking units.

Distinguish slide advancement from notes view, confidence display and a timer: if the speaker needs these, the proposal should evaluate those functions and their separate displays or equipment. Agree on what each computer receives and who confirms main and backup positions match. Check compatibility with the actual application, adapters and transmitter.

Basic preparation

  1. Identify revision, transmitter and power. Check matching DIP addresses; use the official table when mixing generations with different switch counts.
  2. Enable RF reception. For linked units, the current manual specifies Remote Control ON on the receiving unit and OFF downstream; older revisions use Master/Slave. Check actual labels.
  3. Test visual/audible cues first, then USB on each computer. Enable intended connections and focus the presentation application.
  4. To change keystrokes, use the PC-MINI programmer on Windows through USB A with the specified power supply. Save the configuration and verify every button on both computers before the event.
  5. Rehearse forward, back, blank if present and backup switching from the presenter position. Check actual screens as well as cue reception.

Use and troubleshooting questions

The receiver detects the button, but the presentation does not advance. What should we test?

The light confirms cue reception, not execution by the application. Check USB, enabled outputs, keyboard recognition, programming and window focus.

Test each computer separately. Using its own keyboard helps distinguish an application command from the control path.

Test advancement with the final presentation and observe whether a slide, animation or video responds. That distinction helps prepare the transmitter and correct sequence; a receiver arrow does not confirm what happened on screen.

Do USB A and B allow two independent presenters on one receiver?

They are two USB destinations, not two independent RF receivers. Define which buttons and outputs should act before assigning transmitters.

For main and backup, check file, position and advancement on both. Receiving the same keystroke does not correct an already mismatched slide.

What should I check if a button opens another app or sends an unexpected command?

Preserve programming and record button, computer and context. Compare assigned commands, active window and behavior with a single unit, then check interconnection and RF reception on linked units.

Compare proposed changes with the saved programming and DSAN instructions before applying them. If the unexpected behavior persists, send DSAN support the revision, configuration and symptom to establish the next step before resuming operation.

Can a speaker advance slides and trigger videos with the same remote?

DSAN describes videos configured within the click sequence. Starting and reversing them affects later advancement; check the PowerPoint version and rehearse every step with the final file. Do not assign a universal keystroke without testing.

Does PerfectCue Mini also display speaker notes and remaining time?

PerfectCue Mini sends cues and keyboard commands; notes and a timer require a separate display system. A cue light does not show the slide or remaining speaking time.

Checks by symptom

DSAN PerfectCue Mini
SymptomCheckWhat it separates
No cue receivedBattery, address and RF reception.Transmitter versus receiver.
Cue visible, no advanceEnabled USB, keystroke and focus.Reception versus application.
Double advanceRF and interconnection on each unit.Topology versus button press.
Only backup failsFile, position and that computer’s USB.Control versus synchronization.

Limits and precautions

Interconnection ports can carry power: use them only as DSAN specifies. Do not patch these cables into audio or network systems.

Check USB adapter compatibility with the actual computer. Do not assume a programmer for a different PC-Micro revision supports PC-MINI.

If the transmitter includes a laser, follow its specific instructions and do not point it at people. Pointer operation does not establish cue reception or slide advancement.

Prepare the information you already have

Use the cue worksheet to link each button to the expected action on each computer, initial positions and recovery from a missed command. Mark details “not yet defined” and review the sequence with the speaker.

Download editable cue and backup worksheet (.txt)

The worksheet downloads blank for completion. Downloading it or opening Contact does not send an enquiry; review the message and chosen channel before sending.

Questions for preparing an enquiry

Can I enquire before the system is defined?

Yes. Describe the talk workflow, who advances and any main/backup computers or videos. We help choose direct control or operator support and prepare the scope to quote.

What do we check during rehearsal?

File and initial position on both computers, forward/back commands, animations and videos, active window and on-screen result. Agree who watches backup and how to recover a different position.

Documentation by model and revision

Use DSAN’s five-page PC-MINI guide and programming documentation. Identify the actual receiver and transmitter; PC-Micro 2.0 software has a different scope.

Documentation consulted

Review: October 30, 2026. PC-MINI product, five-page official guide, FAQ and programming checked. Documented model is a reference; coverage and behavior need rehearsal on the actual system.

Let’s prepare your event system

Tell us what you want to show, hear or light and what your production already provides. Start with the idea and add models, dimensions and schedules later. Mention the model or guide in your message; the related service is selected in Contact.

Enquire about equipment and servicesView the related serviceEvent preparation guide