Model and documentation reference
The reference is ChamSys MagicQ MQ250M Stadium. Patch and file references use manual 1.9.8.x; identify the actual installed version on the unit. Preserve the original show, its provenance and a working copy before proposing changes.
The model page states 64 universes with an option to expand to 128, four direct DMX outputs and four network ports. Confirm the expansion actually enabled; processed universes and physical connectors are different quantities.
Event application
For a conference, organize arrival, presentation, video and closing. If the venue provides different fixtures, agree which results must be retained and what may be redesigned. A program, photos and a preliminary list can start the proposal; the following tests are planning suggestions, not a completed installation.
Comparison for preparing fixture substitution
| Item to compare | Incoming file | Planned setup |
|---|---|---|
| Identity | Manufacturer, model, personality and mode used. | Actual model and mode; channel table available. |
| Patch | Universe, start address and occupied space. | Enough free space and the destination line. |
| Result | Palettes, positions and looks required by the program. | What stays, what changes and what needs new programming. |
The adapted show must also reach the receiver
Setup → View DMX I/O is where output type, output universe and activation are reviewed. MQ Direct identifies physical output; Art-Net or sACN needs the relevant network path. Record show universe → output or network destination → node and fixtures. A patch-list state alone does not prove reception.
What Morph Head provides and what still needs checking
Manual 1.9.8.x documents MORPH HEAD for transferring programming between types without promising an identical look. A new type using more channels may remain unpatched until reassigned. Start with a sample in the copy and a list of expected results; avoid extending the change to the whole rig before comparing it.
Prepare file review and an adaptation sample
- Identify file, version, unit, date and responsible person. Keep an independent original and give the working copy an unambiguous name.
- Agree what should be imported: according to the manual, Show Structure excludes patch and cue programming. Do not treat it as a complete operational show.
- Compare the original and replacement channel tables. Record which attribute occupies each address and the free space required by the new mode.
- Plan an off-program sample. Compare position, color, intensity and shutter needed by the design, then record palettes or cues requiring review.
- Document file outputs and media. For image or audio extras, the manual distinguishes .shw and .xhw. Deliver the necessary files and a list of completed and pending tests; no load or conversion is performed here.
MagicQ 1.9.8.x · Patching · MagicQ 1.9.8.x · System Management
Frequently asked questions
Does an incoming show eliminate programming?
It may save preparation. Compare the design with planned fixtures, program and operator to decide what remains and what needs adapting.
Does Morph guarantee the same look?
No. Evaluate the sample and agree acceptable changes before extending it; a similar result is not an approved adaptation.
What should I check if a fixture has no address?
Compare the new mode’s space requirement with the free patch block and intended line. Do not assign a trial address without reviewing the complete map.
Does universe capacity define the entire distribution?
Destinations, receivers, cables and a map the technical team can follow are also needed. Size the path for the actual model and configuration.
What helps prepare a quotation?
Date, city, venue, program and approximate equipment. If you have a file, state its version and adaptation needs; equipment, programming, distribution and operation can be evaluated.
Follow control and distribution
Official edition-specific documentation
Consult the exact MQ250M Stadium product page and MagicQ 1.9.8.x chapters. Links open official English documentation; compare that edition with installed software before transferring a procedure.
