Model and documentation reference
Selected reference: Robe iFORTE LTX WB in shared WB/FS manual 2.3, change recorded August 13, 2026. The diagram distinguishes the FS camera; WB has optional CamFit kit P/N 10980885. Camera, station, accessories and followspot software are not assumed included. Identify actual fixture, firmware and project components before final preparation.
Robe iFORTE LTX WB · exact variant
Event application
For a deep stage, runway or presentation in Argentina, draw intended fixture position, useful area, height and performer path. Mark screens, protected surfaces, audience and cameras. Distinguish programmed looks, a stable zone and operated following. Beam-width/control handovers need a scene goal and agreed return. The responsible specialist reviews mounting, distances and travel; this candidate approves none of them.
Robe iFORTE LTX WB/FS · manual 2.3 · 2026-08-13 · selected pages
Differences that change the assembly
| Part | Documented reference | Project record |
|---|---|---|
| WB variant | CamFit P/N 10980885 listed as optional kit | Actual intended camera/accessories; no supply assumption |
| FS variant | Camera and separate Camera Out RJ45 in diagram | Camera path differs from control Ethernet In/Out |
| Optics | Standard zoom 3.5°–55°; LT Follow Spot 0.8°–2° using iris/reducer | Choose function; LT blocks rotating gobos while active |
| Control | One documented 54-channel DMX mode | Actual version, personality, universe and address pending |
Robe iFORTE LTX WB/FS · manual 2.3 · 2026-08-13 · selected pages
Separate lighting data and camera
The panel documents five-pin DMX In/Out and Ethernet In/Out; FS Camera Out serves a different role despite its RJ45 format. Prepare a console/protocol, universe, address and receiver row, with a separate camera/station row where applicable. A 54-channel personality starting at 101 would occupy 101–154 only as an actual-unit-dependent planning example. Wireless reception depends on intended module/configuration; no module presence or pairing is assumed. Physical network link proves no correct-universe reception.
Robe iFORTE LTX WB/FS · manual 2.3 · 2026-08-13 · selected pages
Record operating state before interpreting no response
The manual distinguishes Standby, retaining RDM/REAP information/configuration while motors are disabled and light closed, from a data fault. It also describes cold warm-up without DMX response; preparation must allow actual conditions rather than promising a fixed wait. Documented REAP information/control is no mounting or integrity certification. This package accesses no device, cancels no Standby, performs no pressure test, moves no head and changes no protection.
Robe iFORTE LTX WB/FS · manual 2.3 · 2026-08-13 · selected pages
Prepare a variant-and-task review
- Identify WB/FS, known firmware and available components from labels/documents. For proposed WB camera, record CamFit P/N 10980885 as unconfirmed rather than installed.
- Mark task, distances, people area and cameras. Separate standard zoom, framing, iris and LT Follow Spot; do not plan LT and rotating gobos as independent simultaneous functions.
- Draw DMX/network, universe, address and intended 54-channel personality. Record camera/station path separately; actual connection, patch and reception remain pending.
- For operated following, agree on position/focus/zoom/color/intensity ownership and handover. A camera establishes no automatic tracking and replaces neither operator nor rehearsal.
- Preserve initial state, environmental conditions, pending observations and return owner. Perform no camera install, power-up, reset, calibration, command, REAP access or firmware update to fill this sheet.
Robe iFORTE LTX WB/FS · manual 2.3 · 2026-08-13 · selected pages
Frequently asked questions
Do WB and FS necessarily have identical camera packages?
Do not infer that. The manual distinguishes FS and optional WB CamFit; verify actual variant and every component.
Is Camera Out another lighting Ethernet output?
Its camera function is separate from control Ethernet In/Out. Identify ports by role before planning paths; RJ45 shape establishes no interchangeability.
Can LT Follow Spot use all rotating gobos?
The reducer occupies the carousel and rotating gobos are blocked in this mode. Choose optical function and transition before finalizing the look.
Do an active screen and no movement prove a DMX fault?
No. Standby and warm-up are distinct documented states. Record indication/conditions for specialist review without random resets/commands.
Do camera, narrow beam and distance guarantee useful following?
No. Verify components, attribute ownership, target size, level, camera and return in a representative rehearsal. Documented optical range does not replace it.
Follow the lighting control path
Official edition-specific documentation
Existing SHA-verified official 95-page iFORTE LTX WB/FS manual 2.3, change recorded August 13, 2026. Selective consultation of variant/camera, signal, Standby, optics and specifications; PDF 6/12/23 visually inspected. Extract scope is recorded; no full-manual read claimed. Official WB/FS page text consulted. No new PDF, tested local reader, fixture or followspot system.
