info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

← Back to guides and resources

Reference documentation · Video, LED and playback

ATEM SDI Pro ISO: HD conference, monitoring and handoff

Prepare SDI cameras/presentation, program and isolated takes. Agree the single USB-C role, monitoring, audio and editing handoff.

These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.

Let’s prepare a compact production and its files

Tell us how many cameras/computers are involved, what the room needs and where the stream will be viewed. With date, venue, duration and expected material, we can evaluate equipment rental or purchase and installation, integration, configuration and operation services in Argentina. Complete models/formats using a source list and presentation sample.

What we define for a quote

Separate switching/operation, presentation conversion, program/multiview outputs, control, audio and recording media. Identify supplier contributions and who prepares, starts and accepts recordings. Agree finished program and re-editing inputs separately.

Model and scope

We can prepare an HD conference production and retain program/inputs for editing. Start with date, venue, source count and deliverables; complete conversion, monitoring and operation in the proposal.

ATEM SDI Pro ISO is a compact live production switcher with four HD 3G-SDI inputs, each with format conversion and re-sync. It can combine cameras and other compatible HD sources.

This guide covers Pro ISO, which adds streaming, multiview and ISO recording. It is neither the base ATEM SDI nor Extreme ISO. It operates in HD and does not accept Ultra HD; a 4K camera must feed a supported HD format to the switcher.

Inputs, outputs and audio

Video
Four 3G-SDI inputs and two SDI outputs. Inputs support documented 720p, 1080i and 1080p modes; system outputs are 1080p up to 60 fps. Inputs are not all retained in their original formats: the system uses the selected video standard.
USB and network
Pro ISO has one USB-C for external recording, webcam and control according to the chosen path, plus Ethernet for control/streaming. When assigning USB-C to a drive, prepare Ethernet control; identify separately how video reaches any computer also needing it.
Audio
Two 3.5 mm analog stereo inputs plus SDI embedded audio. Check mic/line level, On/Off/AFV and meters. This model outputs embedded audio and has no dedicated headphone output.

System requirements

HD sources and SDI cables suitable for the format, a compatible monitor and the manufacturer-specified external 12 V supply.

USB-C media compatible with sustained writing and enough space for all tracks. It supports exFAT or HFS+; an SSD’s product name or capacity alone does not establish ISO recording performance.

Compatible computer and ATEM Software Control for configuration; suitable network access and capacity for direct streaming. Record firmware and software versions before changing functions.

Basic preparation

  1. Confirm the Pro ISO label and record software, sources, program format and receivers. Prepare monitoring before going live.
  2. Select the ATEM HD standard and verify every input. Format conversion does not enable Ultra HD input or correct every unsupported signal.
  3. Assign program and multiview to SDI outputs according to planned destinations. Verify each assignment on the actual unit/version and check picture/audio at the receiver.
  4. Define USB-C use, Ethernet control and the computer-video path before connection. Test planned recording, monitoring and streaming together using the intended hardware/cables.
  5. Prepare four isolated inputs and program recording when required for handoff. Check configuration against version documentation and make a sample take: stop correctly and open video, audio and the .drp project with the recipient.

Technical questions and show decisions

The show take is missing isolated cameras or the project: what should I check?

Identify inputs expected as isolated recordings and review the complete take folder and configuration. Pro ISO specifications list four inputs/program as H.264 .mp4, audio and a DaVinci Resolve .drp project; check each requested deliverable in a sample.

Check a short take closed with Stop, keeping the complete folder structure. If the project is absent despite the ISO files being present, record firmware, disk, take name and contents; keep those details for a support review before changing the system.

Can I use USB webcam output while keeping multiview on a monitor?

Multiview uses an SDI output configured for that function; webcam output uses USB-C. An HDMI monitor needs compatible SDI-to-HDMI conversion in the correct direction.

Distinguish this path from disk recording: there is only one USB-C port. Use Ethernet for control during recording; if a computer also needs video, evaluate an SDI path with compatible capture or direct streaming as appropriate for the receiver.

Why does recording flash or drop frames?

Record indicator, available space, duration, media and USB-C cable. Inspect files and test sustained writing with all planned inputs. Verify exact flashing behavior against the version manual before assigning a cause.

ISO recording requires sustained writing of multiple tracks. Test the complete setup with the actual configuration; back up data before formatting, because formatting erases it. Avoid changing several components at once during diagnosis.

Can I add a presentation computer alongside the show cameras?

Yes, by preparing a supported HD signal for an SDI input. For an HDMI computer output, we review conversion, resolution, frame rate, and audio before allocating an input; the adapter follows the signal and path required.

Tell us the expected cameras, computers, and backup sources, even if models are undecided. We can compare a compact system with a larger option and plan feeds for the room, stream, and operator monitor.

What should I request to stream the show and re-edit it afterward?

Define whether you need only the finished program or also isolated inputs for changing shots in editing. Pro ISO can provide that recording, while delivery must cover media, audio, and the project together with video files.

We can evaluate equipment rental or purchase, source preparation, integration and operation in Argentina. Share date, venue, duration, destinations and production contributions. Agree files, audio, media and a recipient test, completing the schedule when available.

Checks by symptom

ATEM SDI Pro ISO symptoms and checks
SymptomCheckWhat it separates
No camera imageSupported HD output and SDI cable.Camera format and ATEM input.
Program without ISOIsolated-input configuration and take folder.Program recording and isolated tracks.
Program instead of multiview on monitorSDI output assignment.Routing and monitor failure.
Recording interruptedIndicator, space and sustained writing.Media capacity and performance.

Limits and precautions

Operating environment: 5–40 °C, without condensation. Use compatible power, maintain ventilation and avoid mechanical strain on connectors.

The .drp file does not replace video and audio media. Keep the take’s media and structure together before editing or moving it.

Record unit firmware, software and configuration. Check streaming/cloud functions by version and destination; prepare an off-air test and retain a recoverable configuration state.

Prepare each destination and verify its deliverable

ATEM SDI Pro ISO: HD conference, monitoring and handoff
PathWhat to compareWhat to confirm with production
SDI program and monitoringTwo SDI outputs and a common HD system format.Program/multiview assignment and reception; conversion for an HDMI monitor.
Drive, webcam and controlOne USB-C: assign its role; prepare Ethernet control when recording to drive.Computer/platform path tested with recording and monitoring.
Inputs and handoffFour ISO inputs plus program, audio and .drp project as scoped.Complete folder, sample opened in editing and original-copy owner.

Retain the plan and per-destination acceptance

Use the destination worksheet for up to four sources, HD format, conversion and audio. Assign two outputs and USB-C, Ethernet control, media, duration and editing-accepted files.

Download the existing destination worksheet (.txt)

Use not yet defined and complete details later. The worksheet downloads blank; retain your copy and describe the need in Contact. Preparing a worksheet or draft does not send an enquiry.

Continue with the production segment you need

Each guide retains model-specific connections and limits. Compare the handoff and each supplier’s contribution.

Official documentation by model and edition

The official Pro ISO section/family page were consulted for connections, HD, multiview and files. The manual timed out; verify exact menus/indicators against the installed version before operation.

Documentation consulted

Review: October 30, 2026. Pro ISO section/family page consulted. No physical connection, configuration, streaming, recording or handoff tested.

Let’s prepare your event system

Tell us what you want to show, hear or light and what your production already provides. Start with the idea and add models, dimensions and schedules later. Mention the model or guide in your message; the related service is selected in Contact.

Enquire about equipment and servicesView the related serviceEvent preparation guide