info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

← Back to guides and resources

Reference documentation · Lighting

ETCnomad and Eos: software, key and DMX output

Prepare lighting control by distinguishing the computer, Eos software, key and output interface. Complete the check at the responding fixture as well as the values on screen.

These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.

Preparing control and checking output

Eos supports offline show-file preparation. An ETCnomad key enables control output but has no DMX connectors. The 1024 and 6144 options refer to output parameters; check the capacity Eos recognizes with your key and software version.

We can assess an Eos-compatible computer, an ETCnomad key and a GadgetII USB interface or supported network gateway. To choose between this setup and a dedicated console, consider the physical controls and peripherals you need and how you would restore operation after a failure.

  1. Record OS and Eos version; check its requirements/release notes. Do not apply Cobalt or HogPC requirements to Eos.
  2. Check key recognition, capacity, station role and chosen output. Offline is not rig control; visualization does not prove physical DMX.
  3. For USB, check supported device recognition and port mapping. For Ethernet, check adapter, protocol, universe and receiver without changing the entire network.
  4. Test a fixture with known mode/address and a simple cue. Record Eos values, output and response before expansion. Plan wired critical data as ETC recommends.
  5. Keep a copy of the show file, connection map and recovery procedure on external storage. We can assess the key, interface, preparation and operation based on available equipment and the agreed scope.
Does GadgetII replace the key?

No. The interface delivers DMX; output authorization and capacity need separate verification.

Why can I see cues but no lights?

Check key, offline/operating role, interface, enabled output and patch. Visible cues only establish file content.

Will any computer or USB-DMX cable work?

Check the requirements for your Eos version, adapters and available ports. ETC supports its Gadget, Gadget II and Eos Programming Wing USB interfaces; third-party USB-DMX adapters are not supported.

Manuals and editions

Check the stated model, edition and language at the manufacturer’s source. Verify the document edition and installed software version separately.

Documentation consulted

Document adaptation: October 29, 2026. Check your system model and version before applying changes.

Let’s prepare your event system

Tell us what you want to show, hear or light and what your production already provides. Start with the idea and add models, dimensions and schedules later. Mention the model or guide in your message; the related service is selected in Contact.

Enquire about equipment and servicesView the related serviceEvent preparation guide