info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

A guide for the technical rehearsal

How to check a video signal before an event

To check a video signal before doors open, follow its path from the source to the screen your audience will see. The aim is to establish what goes in, what comes out and where the image changes. A correct file and a computer preview are only part of that check. Agree the test points, configuration and response to a failed route with the person responsible for the technical system.

Request video planning, installation and testing, or operation for rehearsals and the event. Tell us the intended use and what is already covered; we help you choose even before the diagram is ready. If you are checking a signal, go straight to the chain map or rehearsal checklist.

From signal route to scope

Are you planning the system or preparing its test?

Tell us what you want to show, where the image comes from and which screens need to display it. If you have not identified equipment, connections or formats yet, start with the event’s use and what is already decided.

Plan the video signal route with our team

What you can hire
We plan sources, playback, processing and destinations around what the audience needs to see. Tell us the planned presentations, cameras or content and what your production already provides so we can prepare system options.
Preparation with your team
What your production or venue provides, what the audience needs to see and which tasks remain to be defined for a proposal.
Get a video planning and playback quote View video and playback options

Add video installation and testing

What you can hire
Add installation and signal-route tests. We coordinate checks with the equipment and people involved, using the actual setup planned for the event.
Preparation with your team
If a setup already exists, describe what works, what you observed and what was tested. Add a diagram or model details if available; tasks, access to the system and timings are agreed in the proposal.
Get a video installation and testing quote See how the system is prepared

Add operation for rehearsals and the event

What you can hire
Add video preparation and operation to play content and switch between sources during rehearsals and the event. We agree cues, tasks and schedules with your production team.
Preparation with your team
Programme, rehearsals, file and signal leads, each operator’s tasks and any fallback to be assessed.
Get a video quote with operation View the scope of operation

An enquiry can start with partial information. The proposal confirms equipment, installation, testing, operation, fallback, crew and hours; choosing an option does not confirm availability or a booking.

Identify what each team provides and who may work on each system. Tests and route validation are agreed with the people responsible and the actual setup that will be used.

Your enquiry retains this guide as a reference. In Contact you can change the service and scope or remove the reference; you write the message yourself.

01

Draw the route and distinguish each stage

A video signal chain may include playback, cameras, capture, switching, processing and several screens. Draw the actual route and name every input and output. This table helps identify what has been checked, without blaming a file or cable prematurely.

What to check at each stage of the chain
StageTest questionUseful record
ContentIs this the approved piece or camera shot, and does it play as intended?Identified version or camera; visual reference.
SourceDoes the computer, player or camera deliver the image through the intended port?Device, application and selected output.
Signal formatDoes the next device support what it actually receives?Detected resolution, frequency and progressive or interlaced mode.
LinkDoes the complete segment preserve the signal through its cabling and conversions?Port, route, converter and test conditions.
Processor or switcherIs the input selected and routed to the correct destination?Route, output format and approved configuration.
DestinationDoes the final surface show the expected framing and detail?Identified screen, observation and person validating it.
02

Agree a signal specification and check EDID where relevant

Record the format sent by the source and supported by each input: resolution, frequency, scanning mode and, where relevant, color space and range. Separate the format entering the processor from the format it outputs. If audio is included, note its route and where it is heard.

On connections such as HDMI, EDID communicates destination capabilities to the source. An incorrect exchange may produce an unexpected format or no image; it does not replace testing the chain. Reference: Extron · EDID explained.

For HDMI-to-SDI conversion, verify the chosen device's direction, formats and functions. A different connector does not prove conversion or scaling. The official AJA documentation shows a specific example.

  • Compare the format shown by the source with the format detected at the input.
  • Confirm the intended EDID profile if the chain provides EDID management; coordinate any profile change during the event.
  • Identify the conversions and any agreed format adaptation.
03

Run an HDMI and SDI test one segment at a time

For an HDMI and SDI test, start with a known reference and work toward the destination. Use a monitor or tool that supports the format at that point. A test screen with different capabilities can give a different result from the final system.

  1. Check the source output using a compatible reference connection.
  2. Add the first segment of the actual route and check the signal at its far end.
  3. Add each converter, distributor or intermediate device separately.
  4. Confirm the processor or switcher's input and output.
  5. Check the image on the final surface with the complete route connected.

If a fault appears, return to the last verified point. Change one item or setting at a time and record the result before continuing. For USB capture, the AJA U-TAP FAQ illustrates comparison with a known cable/port and a direct connection.

A link's reach depends on its technology, devices, route and format. Check the specifications for the actual installation; a generic distance or the appearance of a connector is not a guarantee.

04

Separate capture from output assignment

If the workflow includes Resolume, check the input first in the capture manufacturer's software and close it before opening the input in Resolume. Manual configuration, when needed, must match the source. Reference: Resolume · Live Inputs.

For display outputs, confirm that the operating system recognizes the destination and Advanced Output is assigned to the correct connection. Advanced Output is available in Avenue and Arena; output through playback cards requires Arena. Confirm the edition and device for the intended workflow. References: Resolume · Advanced Output and Resolume · Screens.

Slices select regions of the composition. Check that selection separately when a signal is present but part of the image is missing. Reference: Resolume · Input Selection.

Seeing an input in the application does not validate the rest of the route. Also identify which output reaches the processor and which surface receives that route. Software and hardware options must be confirmed for the contracted system.

05

Use an event video checklist with the actual installation

Use this event video checklist with the intended sources, connections and destinations. A stable image at startup does not establish how the chain will respond when a source changes or a presentation resumes.

  • Identify each destination with a test image and confirm orientation, edges and cropping.
  • Check text, detail, motion and gradations using approved representative content.
  • Test the inputs to be used and the source changes planned in the running order.
  • Check the computer's return from pause or sleep; agree its power settings with the operator.
  • Listen to audio at its destination when it is part of the signal and check its relationship to the image.
  • Observe cameras, playback and screens during relevant changes, according to the event's use.
  • Record the detected format, tested route, result and person validating it.
  • After a device, cable or setting changes, repeat the test of the affected route.

The pattern identifies the route; the representative piece helps assess actual use. Closing the test should make clear what was approved and which outstanding item needs another check.

06

Label the routes and agree a response to failure

Label both ends of every link with source, destination and port. Keep a connection diagram and the approved configuration, with its date and responsible person. Identify who may change a route and how the event's operating team is informed.

The fallback may be an alternative source, another tested route or an authorized holding graphic, according to the agreed scope. Define when it is used, who activates it and how the program resumes. An alternative sharing the same failure point does not cover that fault: record its dependencies and test it before doors open.

To contact Eventos Globales, you can start with what you need to show and what remains unresolved. Add the date, venue, sources, destinations or signal diagram if available; if you are reviewing a setup, describe your observations and tests carried out. Equipment, operation and fallback arrangements are defined in the proposal.

Organize those details with the event technical brief. For file preparation, read the LED content and Resolume guide. To define the system's scope, review video, playback and camera integration and technical event production.

FAQ

Questions before the rehearsal

Why does a file look right on the computer but not on the event screen?

Because playing the file on a computer does not check the whole event signal chain. We review the selected output, transmitted format, links, processor route and destination. Testing continues from the last point with a correct image, changing one element at a time. Tell us what is visible, where the problem appears and what has been tested so we can prepare the review with the responsible team.

Request a review quote with the details I have

Does an HDMI or SDI adapter solve every incompatibility?

No. Choosing one requires checking direction, supported formats and function: adapting a connector, converting a signal and scaling an image are different tasks. We review the device within the complete chain using the actual formats. Tell us the source, destination and any models you know so we can review the adaptation your project needs.

What should we do if the content is protected by HDCP?

Confirm permissions and chain compatibility. The model in the cited AJA manual does not support HDCP. If the workflow is not viable, agree an authorized alternative; do not remove or bypass protection.

Does seeing a camera feed or presentation in Resolume confirm that its audio is also coming through?

No. Seeing the image does not confirm the sound. Resolume Live Inputs, consulted on October 23, 2026, states that audio capture is not supported. Agree the audio source, destination and person responsible, then test the path; confirm the version, edition and equipment. Resolume · Live Inputs.

Coordinate the audio route with sound and lighting

Reference documentation

Official documentation supporting the technical criteria. Equipment and conditions are defined for each project.

Eventos Globales

Get a quote for video planning, testing or operation.

Choose whether you need to plan the video signal route, prepare installation and tests or operate during rehearsals and the event. You can enquire without completing the six steps or knowing device models, connections or formats; tell us the intended use and what you already know.

Tell us your event idea and what you want to delegate. If a setup already exists, describe the situation and tests carried out; add the date, venue, sources, screens or diagram when available. We prepare planning, installation and testing or operation options, coordinated with the responsible team.

This preview prepares a summary for review; it does not send your enquiry to the team.

Your enquiry retains this guide as a reference. In Contact you can change the service and scope or remove the reference; you write the message yourself.