info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

← Back to guides and resources

Reference documentation · Sound

Model 370A: prepare talk, listen and headset paths over Dante

For stage, video or technical-direction coordination, a beltpack needs defined send and return paths. This guide prepares a two-channel Model 370A matrix: who talks, who listens, where return audio comes from and which headset is intended. A network connection proves no configured production conversation.

These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.

Model and documentation reference

This candidate concerns Studio Technologies Model 370A Intercom Beltpack, with two talk and two listen channels. The documentary scenario uses User Guide Issue 4, June 2023, applicable to M370A-04501 and later with application firmware 2.1 and later. Issue 2’s August 2019 cover applies to M370A-02501–04500/application 1.2 and later; Issue 4 is not generalized to all units. Comparison Chart Issue 7 separates 370A from discontinued Model 370: its DIP settings/local sidetone controls are not transferred. Datasheet Issue 3 supplies format/connector reference. Actual serial/application/Dante versions remain pending.

Model 370A User Guide · Issue 4 · June 2023 · M370A-04501+ · Model 370A User Guide · Issue 2 · August 2019 · cover only · 370-Series Comparison Chart · Issue 7 · February 2021 · Model 370A Datasheet · Issue 3 · May 2021

Event application

For an event in Argentina, channel 1 might serve stage coordination and channel 2 video, with named roles and destinations. This proposes roles, not an operating network. Multiple-pack party-line applications use an external Dante audio matrix in the manual; an Ethernet switch provides no intercom mixing. Point-to-point still needs send/return patch. Identify owners for networking/PoE, subscriptions, matrix and user configuration, plus city, venue and rehearsal window.

Model 370A User Guide · Issue 4 · June 2023 · M370A-04501+

Per-beltpack connections and dependencies

Per-beltpack connections and dependencies
PathModel 370A / Issue 4 referenceRequired planning record
Network/power100BASE-TX, IEEE 802.3af class 1 PoE; etherCON/RJ45Actual port negotiating 100 Mb/s/PoE; EEE and switch power budget pending
Talk to networkTwo Dante transmitter channels; two transmit flowsChannel 1/2, destination and subscription; channels are not flows or unlimited receivers
Listen from networkTwo Dante receiver channels, 48 kHz; Left, Right or Left and Right output assignmentReturn source, clock, headset routing/level and external matrix where required
HeadsetXLR5F, dynamic or low-voltage electret microphone; no P12/P48Model, pinout and power requirements; five pins alone prove no compatibility

Model 370A User Guide · Issue 4 · June 2023 · M370A-04501+

Write separate talk, return and sidetone paths

Proposed path: headset microphone → talk 1/2 → Dante subscription → destination/matrix; return: source/matrix → Dante receiver 1/2 → headphone assignment. The manual documents 48 kHz, up to 24 bits and four total flows, two per direction. Flow count is no participant count. Push to Talk, Latching, Push to Talk/Tap to Latch and Disabled modes are configured per button. Sidetone locally returns microphone audio while talk is active; hearing it proves no remote reception, and the two listen pots do not control its level. Call uses an in-band 20 kHz audio-channel signal; another system’s compatibility depends on path/interface, not connector resemblance.

Model 370A User Guide · Issue 4 · June 2023 · M370A-04501+

Review network, headset and version without changing the system

The manual requires 100BASE-TX/PoE; a Gigabit port needs 100BASE-TX negotiation. Its technical note excludes direct connections between Ultimo devices such as two Model 370A units, requiring an intermediate Ethernet switch. It also documents EEE disabled on Dante ports; this preparation records the requirement without changing networking. For headsets, output pins 4/5 must not be shorted; plan mono through configuration and verified pinout without making adapters. P12/P48 are unavailable. Issue 4 comparative text mentions 5 V electret power while its specification table and datasheet list 3.3 V: retain actual numerical supply as unresolved. Select no microphone power by resemblance. Identify can disable active talk when Mic Kill recognizes Device ID; it is not a harmless check performed here.

Model 370A User Guide · Issue 4 · June 2023 · M370A-04501+

Prepare the intercom review

  1. Identify Model 370A, serial, application/Dante firmware and applicable manual. Missing records keep Issue 4 conditional; update no device to fit the document.
  2. Assign roles/talk/listen channels in a send/return matrix. Identify external party-line matrix or point-to-point endpoints and owner.
  3. Record switch/port, 802.3af class 1 PoE, 100BASE-TX negotiation, EEE, 48 kHz clock and proposed subscriptions. Connect, scan or modify no networks here.
  4. Identify headset/microphone, pinout, electrical needs and headphone output. Retain electret-voltage discrepancy and talk/sidetone/Mic Kill review; rewire/apply no settings.
  5. Agree owners and later send, return, call and user checks. Perform no Identify, talk, calls, configuration, reset, installations, enclosure opening or firmware work.

Model 370A User Guide · Issue 4 · June 2023 · M370A-04501+

Frequently asked questions

Does a switch alone form a multi-pack party-line?

It performs no intercom mixing. The manual uses an external Dante audio matrix for that application, alongside prepared routing/subscriptions.

Can two Model 370A units be directly cabled?

Issue 4 excludes direct Ultimo-to-Ultimo connections such as these packs and requires an intermediate switch. Identify PoE/negotiation too.

Is every five-pin-XLR headset compatible?

No. Review model, microphone, power, impedance and pinout. P12/P48 are unsupported; output pins 4/5 must not be shorted to create mono.

Does sidetone prove the remote listener hears me?

No. It is local microphone return, separate from Dante destination and received listen audio. Owners need a complete path test.

Can Issue 4 and Identify be used identically on all units?

That is not assumed. The manual has serial/application scope, and Identify can trigger configured Mic Kill. Document both before an authorized intervention.

Complete the audio brief

Download the 370A talk, listen, network and headset matrix

Identified official documents

Four existing SHA-verified official English originals: User Guide Issue 4 (June 2023), Issue 2 cover (August 2019), datasheet Issue 3 (May 2021), Comparison Chart Issue 7 (February 2021). Issue 4 PDF text: 1–14 and 16–18; visual: 1, 7, 8, 10, 16, 17. Issue 2: cover 1 only, not full manual. Datasheet: 1–3 text, 3 visual. Chart: both pages text/visual. No edition proves installed firmware or current availability. Electret discrepancy retained. Official links, no new PDF copies or native reader test.

Plan event sound

For event intercom planning in Argentina, share city, venue, roles, participants, proposed channels, endpoints/matrix, identified Model 370A/serial, switch/PoE and headset. State missing versions/routes. Availability, compatibility, configuration scope and rehearsal require confirmation.

Enquire about equipment and servicesView the related serviceEvent preparation guide