info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

← Back to guides and resources

Reference documentation · Video, LED and playback

BrightSign XT1144: local loop, HDMI input and displays

Prepare content for a stand, entrance or information display: define files, live input, independent pictures and recovery.

These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.

Let’s prepare event playback

Tell us what each display should show and when content changes. We can evaluate equipment rental or purchase and prepare files, playback, an HDMI source connection, rehearsal and operation. Identify supplied equipment and Internet dependencies; the playlist can follow.

What to agree for a quote

Count different pictures, displays and live sources before choosing an architecture. Agree who supplies and approves content, prepares schedules or triggers and makes changes. Equipment, storage, signal, configuration, connectivity and operator depend on scope; remote services need compatibility and license checks.

Model and role

The BrightSign XT1144 is a Series 4 digital-signage player for images, audio, video and interactive presentations. It includes HDMI input for a live source. Identify XT1144 on the unit; XT244 shares part of the hardware manual but does not have the same expanded interfaces.

Connections and limits

Video
1 HDMI output and 1 HDMI input, separately labeled. The hardware guide specifies up to 4096×2160 at 60p for each interface. Supported source and display modes still need to match the actual presentation.
USB and control
USB 2.0 Type A and Type C, serial RS-232, GPIO and IR. The Type C port is documented as USB data/host-device, not a second video output.
Storage, network and audio
microSD slot and Gigabit Ethernet. The combined analog/optical audio output cannot transmit analog and digital audio simultaneously. Wi-Fi requires the appropriate installed hardware and is disabled when powered by PoE.
Power
External supply: 12 V, 3 A, 36 W rating; this is not constant measured consumption. Ethernet supports PoE Type 1 and Type 2 with different power budgets. With the external supply, peripherals share a maximum 2 A total; each connector also has its own limit.

What the system needs

Saved presentation and content, suitable storage, a compatible display and HDMI cable, and the correct power source. Record the BrightSignOS version, authoring application and presentation format before making changes.

For live video, provide a supported HDMI source and an authored video-input zone/state. Confirm any required HDCP compatibility across the complete route and test the source through the player as well as directly on the TV.

Before finalizing the proposal, check a sample with the final file’s container, codec, resolution, frame rate and audio on the intended software version. Define who publishes and updates content; remote management or synchronization requires verification of the configuration, service and licenses applicable to the chosen system.

Prepare the system

  1. Preserve the existing project, media and storage contents. Identify XT1144 and record software versions, output resolution/frame rate, schedule and update method. Use a separate test copy rather than overwriting the only working presentation.
  2. Connect the display to HDMI Out and any live source to HDMI In. Select a supported output mode and test a simple local image/video before adding the live source or interactive logic.
  3. In the authoring tool compatible with the XT1144 and its BrightSignOS version, prepare the video-input zone or state. The official tutorial describes Video In within a video zone. Check the rehearsal presentation path before connecting the live source and compare steps with that tool version.
  4. Rehearse the full playlist, transitions, live source, audio, startup and fallback. Test networking and attached USB devices with the intended power method.

Use and troubleshooting questions

Can this player send different content to two projectors?

The documented XT1144 has one HDMI video output. USB-C is USB 2.0, and the other HDMI connector is an input. Dual video decoding does not establish two independent display outputs.

Count the required independent images before choosing the system. If both screens need different synchronized content, specify a documented multi-output or multi-player design; do not assume a USB-C video adaptor supplies an extra output.

The live HDMI source is black, but local files play. What should I check?

Confirm source-to-HDMI In and display-to-HDMI Out, then inspect the presentation’s video-input state and transition. Record the source resolution/frame rate and compare it with the supported route. Test a simple known compatible source and cable during rehearsal.

The hardware manual lists HDCP 1.4 signaling. Verify the actual source’s protection requirements, player software and downstream equipment rather than assuming every protected source works. A direct-to-display test narrows the route but does not identify the cause by itself.

Why does Wi-Fi stop, or a USB device fail, after switching to PoE?

The manual states that Wi-Fi is disabled whenever the player uses PoE. With Type 1 PoE, the total available power is 12 W and each USB port supplies only 100 mA; high-power drives will not operate in that condition.

Check the switch/injector type and peripheral requirements. During a planned test, compare the approved external supply and required Wi-Fi hardware, preserving settings. With external power, stay within the 2 A shared peripheral limit and each connector’s rating; do not reset the player as the first response.

A long video stutters during the show. What should we test before replacing the player?

Record the file, symptom time, OS, storage and output mode. The guide recommends appropriate encoding and checking bitrate peaks; network playback or rotation can change the load. File-average bitrate is insufficient.

Can content keep running if the venue loses Internet?

BrightSign documents network-free playback for local files prepared in standalone mode. A website or live stream does not become local content. Also verify authoring-tool and OS compatibility with this XT1144.

Symptom and next check

BrightSign XT1144
SymptomCheckNext step
Second independent output requestedHDMI direction and USB functionUse an explicitly supported display architecture.
Live video black, local playback worksVideo-input state, source format and HDCP requirementsTest a compatible source and cable.
Wi-Fi/USB fails with PoEPoE type and peripheral power budgetCompare the intended approved power method.

Power, environment and installation

The manual specifies sustained ambient operation from −20 to 50°C. A transient allowance up to 70°C does not authorize continuous operation there. Allow a cold unit to acclimatize before applying power if condensation is possible.

Use the specified power connector and supply; keep ventilation clear. Do not format storage, restore the player or install firmware as a generic fix without preserving the working project and checking the exact model/version.

Worksheet for preparing and recording rehearsal

Record local/live content per display, files and formats, triggers, audio and power. Separate storage playback from network dependencies. Mark details “not yet defined” and complete the plan with the programming approver.

Download local playback and HDMI worksheet (.txt)

The worksheet downloads blank. Completing it or opening Contact does not send an enquiry; review the message and chosen channel before sending.

Questions for preparing an enquiry

Can I enquire before choosing a model?

Yes. Tell us how many different pictures are needed, whether files or live sources are involved and who calls changes. We help compare scheduled playback, multiple players or operated playback.

What result do we agree to check?

Startup, complete sequence, audio, live input and return to local content, observed at each destination. Define what appears if a source or Internet is lost and rehearse that response before admission.

Documentation by reference and version

Use XT1144 rows in Series 4 documentation. Check authoring steps against the intended BrightSignOS and compatible tool; a function documented for other series does not establish support here.

Documentation consulted

Review: October 30, 2026. XT244/XT1144 hardware, interfaces, environment/power and Video In, quality and standalone documentation consulted. No configuration, content publication or physical test performed.

Let’s prepare your event system

Tell us what you want to show, hear or light and what your production already provides. Start with the idea and add models, dimensions and schedules later. Mention the model or guide in your message; the related service is selected in Contact.

Enquire about equipment and servicesView the related serviceEvent preparation guide