info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

← Back to guides and resources

Reference documentation · Lighting

ENTTEC Open DMX USB 70303: trace computer output to fixture response

For a scene prepared on a laptop, separate device detection, application access, output universe and light response. A recognized USB device does not establish a ready scene. Use this guide to document the route and propose an off-program test without launching software or connecting equipment.

These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.

Model and documentation reference

Exact model: ENTTEC Open DMX USB, code 70303. References are data sheet ID 2716266 updated July 2025 and official model support. It is distinct from DMX USB PRO 70304 and PRO Mk2 70314. Their input, onboard processing or playback functions are not transferred to the 70303.

ENTTEC · Open DMX USB · 70303

Event application

For a talk or presentation with simple changes, assign computer, project, compatible application/version, patch and operation owners. The interface delivers data; connecting it does not prepare scenes or follow a song. For playback-coordinated triggers, document signals, pauses and recovery in the control project before selecting this route. A general software list also establishes no tested compatibility for a specific version.

70303 roles and checks still needed

70303 roles and checks still needed
StageDocumented referenceProposed check
Computer → USBUSB 2.0 Type-B; power from USBSeparate system detection and application access
DMX outputFemale five-pin XLR, output onlyUniverse and fixture address/personality
CapacityOne universe, up to 512 channels depending on softwareChannels actually required by the patch
ProcessingComputer processes output; no onboard bufferResponse under intended computer workload
LimitsNo DMX input, RDM or standalone playbackAlternative if the computer stops operating

Open DMX USB data sheet · ID2716266 · July2025 · PDF1–2

An output interface is not a patch fixture

Record application, operating system and versions before choosing instructions. ENTTEC QLC+ support distinguishes enabling Output in Inputs/Outputs from observing channels through Simple Desk. QLC+ v4 plugin documentation identifies Open TX for this output class; Open RX or Pro cannot add hardware capabilities. Profile, address and personality belong to the fixture. Keep them separate from interface and output-universe selection.

ENTTEC · Open DMX USB with QLC+ · 11 September2026 · QLC+ v4 · DMX USB plugin · documentation only

Detection without response, or flickering output

The proposed test first compares a simple project and a known fixture, including intensity and shutter where required by its profile. Support states that only one program can access the interface at a time; record applications that may claim it. If response changes under other workloads, note the timing and intended load before assigning a cause. Separate that observation from DMX line and cabling checks. No output frequency is prescribed as a universal fix, and no automatic reinstallation is proposed.

Open DMX USB data sheet · ID2716266 · July2025 · PDF1–2 · ENTTEC · Open DMX USB with QLC+ · 11 September2026 · ENTTEC USB software compatibility · 26 October2026

Prepare evidence before changing settings

  1. Identify 70303, system, application and version; preserve the current project and configuration. Check that combination without installing drivers here.
  2. Prepare a row for system-visible device, application access, interface type and enabled universe. None of these states substitutes for the others.
  3. Record profile, personality, address, test channels and cable route. Assign response observation and an expected off-program sample.
  4. Agree on comparison under actual computer tasks without competing port access. Keep measured or pending results; this candidate performs no test.
  5. Define project recovery and event continuity if the computer fails. This model does not play scenes by itself; no firmware, driver or equipment change occurs in this preparation.

Open DMX USB data sheet · ID2716266 · July2025 · PDF1–2

Frequently asked questions

Does USB detection mean ready lighting control?

Application access, output-universe assignment and patch correspondence still need verification. Preserve each separately; a system screenshot establishes no DMX response.

Can it receive DMX or query RDM?

The official 70303 comparison specifies output only, with no DMX input or RDM. Do not select a feature just because it appears in PRO or generic plugin instructions.

Why is there no activity LED?

The data sheet lists no LED indicators. Their absence diagnoses neither power nor communication; detection and response need other evidence.

Do EMU, ELM or Pro-Manager support this model?

The official table consulted marks Open DMX USB as N/A. Verify a compatible application and version rather than treating the ENTTEC name as product equivalence.

Can the show run without the laptop?

The data sheet specifies no standalone playback. A host-dependent project needs that computer operating and agreed continuity; buffering and standalone playback are also distinct concepts.

Follow the lighting control path

Download detection, output and DMX response worksheet

Official edition-specific documentation

Open DMX USB 70303 data sheet, ID 2716266, July 2025: both pages read; p. 2 rendered and visually inspected. ENTTEC support: model comparison, compatibility and QLC+; QLC+ v4 plugin documentation retained within its scope. Existing original SHA verified without copying. No driver or code-example download opened, and no application or hardware operated.

Plan lighting for your event

For event lighting-control planning in Argentina, share city, required scenes, computer/system, application and fixture information. An initial diagram is useful before a project exists. The consultation scopes tasks and continuity without claiming availability or tested configuration.

Enquire about equipment and servicesView the related serviceEvent preparation guide