Prepare sound from your program and space
Share city, date, program and audience layout. Start with a sketch and complete sources, equipment, connections and schedules with your production in Argentina.
Prepare music and bass with the existing system
For a show, reception or conference with music, review program, room, main speakers and listening points. Eventos Globales can assess equipment rental or purchase, connections, preparation, placement, setup and sound operation. Start with a sketch and complete models, power and tasks with production; identify each party’s resources in the proposal.
Model and connections
Identify model and line path. THRU/OUTPUT connectors and THRU/DSP OUT selection must match the actual diagram. D-XSUB, crossover and cardioid mode serve different purposes; similar panels do not justify copied settings.
Prepare and check
Map the signal path and note the position and orientation of each unit. Review acoustic design and physical installation separately: filter and alignment settings do not replace checks of accessories, power and handling. Identify who will carry out each check and save the configuration before testing changes.
Questions and decisions
How does it integrate with Yamaha tops?
Record the full-range speaker models and the inputs and filters on every subwoofer and speaker. Follow the preset and diagram for that exact system. Check the THRU/DSP OUT selection and the signal sent by each output; an XLR connector alone does not establish that the required filtering is applied. During the check, confirm a clean signal in both paths and the intended filtering. If one path is missing, check the output selection, cable and destination input before increasing gain. Listen to the subwoofer and full-range speakers separately, then together, starting at a low level. Save the settings and identify who is responsible for alignment. Speakers from another generation require their own documentation.
Why is bass strong on stage but weak in the audience?
Mark the listening points, the position and orientation of each subwoofer and the signal feeding it. Compare the same reference on stage and in the audience; weak bass at one point may result from interactions and room effects rather than a lack of power. Have the technician assess positions and a documented arrangement, including cardioid mode where appropriate. Do not turn cabinets or reverse polarity at random. Check the result in every required listening area.
Coordinate filtering, distribution and listening
Separate the console feed, subwoofer input and outputs to main speakers. Record placement, sources and listening areas with the person responsible for tuning. Prepare connections and program checks to assess subwoofer and main speakers separately and together, retaining the tested configuration.
Prepare a useful proposal
How do we start before knowing how many subwoofers are needed?
Share program, city, date, space and available main speakers. Assess system and placement alternatives, complete the survey and separate equipment, preparation and operation in the proposal.
Can we hire integration and operation with venue equipment?
Assess the required scope with production. Identify models, connections, power lead, placement and rehearsal schedule; agree who prepares and receives each part.
Enquire about event equipment and services
Enquire about equipment, preparation, integration, setup and operation. Contact opens with Sound selected; mention DXS18XLF or PX5 if relevant. Start with the idea and complete dimensions and models later. Review the message before sending.
Record sources, destinations and program checks
Use the existing speech rehearsal worksheet to record sources, feeds, responsibilities and test results.
Download editable speech rehearsal worksheet · TXT
Continue with system and mix preparation
Official references and editions
DZR/DXS-XLF reference manual IP-F0, 57 English pages, published September 2024. Standard DXS18XLF and DXS18XLF-D have different connections; identify variant and revision before preparing outputs and controls.
Documentation consulted
Checked October 30, 2026. Official sources checked for model, standard/-D variants, D-XSUB, LPF/POLARITY, outputs and cardioid scope. Verify placement, filtering and alignment with the actual system.
