Equipment and operation for your event feeds
Tell us what the audience needs to hear and what stage, remote call and recording receive. Request sound equipment, setup, preparation and operation from Eventos Globales for conferences, presentations and shows in Argentina. Start with the running order and what the venue or production supplies; complete models, connections and schedules later.
Connect stage and mix position with a two-way map
A list of microphones, mixes and positions helps compare local I/O with a remote stagebox. Request equipment, links, patch preparation, return tests and coordinated operation. If house and monitors share sources, also identify preamp ownership and what must continue through each change.
Model and application
- Analog inputs
- 32
- Analog outputs
- 16
- AES50 ports
- 2
- Rates
- 44.1 / 48 kHz
- USB role
- Firmware updates
DL32 is remote I/O, not a mixer or a Dante/USB recording interface. Confirm console, firmware and the documented topology.
Connections and required equipment
Mic → shared preamp → AES50 → console channel/bus → AES50-A transmit → rack XLR output. Console Ethernet control and ULTRANET serve different functions.
Prepare the system
- Save console routing and identify the clock leader.
- Protect outputs and compare actual port labels, cable and sync indicators.
- Test one input and one stage return before opening all destinations.
Choose the next check
| Observation | Next check | What to record |
|---|---|---|
| No sync | Clock/cable/port | Both-end status |
| Silent outlet | AES50-A transmit map | Bus/channel/XLR |
| Shared gain changes | HA ownership | Consumers and settings |
Precautions
- Use the prescribed shielded AES50 cable, not an ordinary network switch path.
- Coordinate phantom and protect downstream systems before patching.
- Leave internal repairs to qualified service personnel. Identify the cause before considering an update or restart.
Synchronization is present but a microphone block is missing
- Keep the file and list working inputs. On an M32, for example, DL32 XLR9 need not feed session channel9: follow socket → receiving AES50 port → input position/bank → channel. Selecting a local bank instead of the intended AES50 bank can omit part of the rack. Menus and options depend on mixer/firmware.
- Compare a known source on a working and affected input with protected levels and agreed phantom settings. If signal reaches the AES50 receiver but not the channel, inspect channel source/bank and patch; if it reaches the channel but not its destination, follow bus and output.
- If the issue follows the microphone/cable, investigate that source. If it remains with a block, retain assignments and both-end states for review. Stable sync does not validate all 32 preamp routes; do not rebuild clocking or the whole scene for a local assignment issue.
More setup questions
Does stable AES50 sync prove every microphone reaches the mix?
No. Check each socket/received position against channel source/bank. For a missing block, compare its assignment with a working block before changing clocking or replacing the stagebox.
Distinguish connections, mixes and control
Count physical inputs separately from mixes. Record who generates each return, which AES50 position carries it and which stage XLR delivers it. In a shared system, receiving audio does not confirm HA control; agree gain and phantom with both operators and compare each destination.
Input and stage-return decisions
Where should I start when AES50 synchronization is unstable?
Record both ends, sample rate, port and planned clocking. Check documented link and cabling before patch changes. In rehearsal, compare a known cable/path and then verify audio; do not change several settings or open the unit to test it.
Why does a console output change but not the DL32 stage return?
They are separate destinations. DL32 documentation maps XLR1–16 to AES50-A1–16: follow bus, console transmit position and final connector. With a stable link, check that send and its mutes before changing clocking.
Can house and monitors set gain independently?
Digital sharing uses a shared analog preamp. Identify the HA/phantom owner and supported downstream trim. For different independence, compare source splitting with separate preamps and document outputs and power.
Can DL32 USB record the microphones?
The guide identifies that USB port for firmware maintenance. Prepare recording through a system interface or card. For ADAT, check its AES50 positions17–32, clocking and interface inputs; it is not an automatic copy of all 32 local inputs.
Can I connect AES50 to a Dante switch because both use RJ45?
Connector shape does not define transport. An ordinary Ethernet switch does not replace a compatible AES50 link. Confirm console, protocol and topology; compare a dedicated link or documented adaptation without inferring preamp control from passing audio.
Prepare the proposal and operator handover
Share city, date, running order and approximate source count. Identify venue-supplied items and tasks to delegate: equipment, setup, configuration, rehearsal or operation. Leave unknowns undecided. The worksheet is optional; downloading or completing it does not send an enquiry.
Continue with the console and sharing method
Official system references
Consult the official DL32 page and 15-page multilingual quick-start guide linked by the manufacturer. The guide separates controls and output mapping. Compare document version and actual system before preparing patching.
Documentation consulted
Document review: October 30, 2026. Official model-specific references and editions; no equipment changes or inventory verification performed.
