Let’s prepare the signal for your display
Tell us what you want to show and which display or projector the venue provides. We can evaluate equipment rental or purchase and the conversion, cabling, configuration and operation your event in Argentina needs. Start with a connection photo or description; models and formats can follow.
What to agree for the proposal
Define what each destination receives and who supplies the source, prepares content and approves framing. Separate equipment, installation, conversion, configuration, rehearsal and operation in the quoted scope. For LED displays, identify the controller and physical map as well.
Model and application
ImagePRO-4K is a video processor; it does not replace LED sending and receiving cards. Identify installed cards, version, and mode before defining connections and functions. Other ImagePRO generations require their own documentation.
Signal and formats
- Inputs and outputs
- The documented Tri-Combo configuration includes HDMI, DisplayPort, and SDI. Format, color, and content-protection capabilities depend on connector and installed card.
- Processing
- Scaling and conversion adapt signals to destinations within documented limits. A 4K label does not guarantee every resolution, frame-rate, and bit-depth combination.
- Operation
- Prepare source and output assignments, framing, and patterns for each destination; a preset validates neither physical connection nor downstream equipment.
System preparation
- Record model, cards, source, destination, complete format, and signal path; preserve initial settings.
- Agree destination resolution, frame rate, aspect ratio, and framing before conversion settings.
- Test output pattern and source separately; add adapters and extenders individually.
- Rehearse source selection and return to agreed settings; save clearly identified working configurations.
Planning questions
- When should we include it in an event system?
- Will an adapter make any signal work?
- Why does the source work directly but fail through the system?
- Is changing EDID the same as changing output format?
- How do we check an image that fills the screen but looks distorted?
- Do two outputs or a distributor provide full backup?
When should we include it in an event system?
When a source needs a different format or framing, identify connector, card and supported modes. This information helps choose processing and prepare a receiver test; record input and output formats separately.
Will an adapter make any signal work?
Matching connectors are insufficient. Compare conversion direction, format, frame rate, color, protection, and every device’s capacity. If output and destination differ, assess another documented port or compatible conversion; test the adapter within the actual chain.
Why does the source work directly but fail through the system?
Preserve the direct test and compare detected input, configured output, and the destination’s supported format. Try a pattern on the selected output: if it arrives, investigate source and processing; otherwise check output and downstream path. Add each segment separately to locate where the result changes.
Is changing EDID the same as changing output format?
They are different: EDID tells the source which input formats it can send; output configuration must match the destination. EDID does not apply to SDI. Record both ends and check received format before changing advanced values; do not begin with a full reset.
How do we check an image that fills the screen but looks distorted?
Compare a circle, border marks, and text with the agreed area. Check aspect ratio, size, crop, and output before altering content by trial and error. For a differently shaped destination, assess margins, approved cropping, or custom design; scaling adds no source detail.
Do two outputs or a distributor provide full backup?
Define which failure backup must cover and which elements paths share. Distributing the same signal may preserve a single failure point. We can assess alternative routes and a rehearsed change procedure, including destination synchronization where required; connector count does not guarantee continuity.
Checks by symptom
| Pattern arrives, source does not | Check detected input, selection, format, and source processing. |
|---|---|
| Pattern does not arrive either | Verify selected output, destination format, cable, and downstream devices. |
| Full but distorted image | Compare proportions and framing using a circle and border marks. |
Use and safety
Save configuration before changes; identify card and documentation before intervention. Cards are not hot-swappable.
Prepare rack mounting, power, and ventilation under the manual with competent personnel. Do not interrupt the live show for testing.
Prepare the information you already have
Use the existing conversion worksheet to record source, input, output and receiver; add what must remain visible and which crop is approved. Mark missing information “not yet defined”.
Download conversion worksheet (.txt)
The worksheet downloads blank for completion. Downloading it or opening Contact does not send an enquiry; review the message and chosen channel before sending.
Questions for preparing an enquiry
Can I enquire before the system is defined?
Yes. Describe the source, where you want it displayed and venue-supplied equipment. We help compare conversion, processing and content preparation to quote the part you need.
What do we check during rehearsal?
Pattern and actual content at the receiver, proportions, crop, legible text, audio where required and return to agreed settings. Identify who approves each destination and the alternative to rehearse for the planned failure.
Documentation by model and revision
Use the official ImagePRO-4K specifications to identify cards and formats. Check menu procedures against the revision’s manual before changing a system.
Documentation consulted
Review: October 30, 2026. Official ImagePRO-4K specifications checked. Detailed R5906167 procedures need validation before applying menu steps.
