Let’s prepare program recording and show clips
Tell us what you need to retain and what must go on air. We can evaluate rental or purchase, program recording, clip playback, installation, configuration and integration in Argentina. A content sample and tentative schedule help define media, technician and rehearsal; if you provide switching or recorders, prepare the complementary connections.
What we define for a quote
Separate recording and playback as tasks: source, input, destination, codec, media, control, audio and power per path. Agree file preparation, cue operation, recording start/check and copy retention. If they overlap, size equipment and rehearsal for that concurrency.
Model and use
We can prepare camera or program recording and show-clip playback. With date, venue, source, destinations and duration, evaluate equipment, integration and operation; complete formats/media using a sample.
Blackmagic HyperDeck Studio 4K Pro is a video recorder and player for camera or program signals. It can record a system output and play prepared event clips.
Studio 4K Pro supports Ultra HD up to 2160p60 and 12G-SDI connections. It has SSD bays and dual AC power supplies. It differs from HyperDeck Extreme 4K and Studio HD Plus/HD Pro.
Signal, formats, and media
- Video
- Selectable 12G-SDI and HDMI 2.0 inputs; SDI loop, SDI A/B and HDMI outputs, plus SDI monitoring. Check the selected path through to the receiver.
- Formats
- ProRes HQ, 422, LT, and Proxy up to 2160p60. H.264 up to 1080p60 and H.265 for 2160p up to 60 fps. ProRes 4444 is playback only, with fill/key over SDI A/B up to 2160p60.
- Media and control
- 2 bays for 2.5-inch SATA SSDs, 2 UHS-I/UHS-II SD slots, and external USB-C recording. 10 Gb/s Ethernet and RS-422. Embedded audio: 16 SDI channels and 8 HDMI channels.
What to prepare
A supported input, suitable cabling, and manufacturer-approved media for the chosen format and codec. A card’s advertised speed does not replace this check.
A monitor and audio monitoring to inspect the file; sufficient space and planned duration. For critical recordings, plan a backup path and rehearse recovery.
Test the file on the delivery computer, operating system, and application. If one player shows black video while another opens it, preserve the original and note codec and versions before assigning a cause.
Basic preparation
- Identify the variant and note firmware, input, resolution, frame rate, codec, and media before rehearsal.
- Select the planned SDI or HDMI input and check format, clean picture and source-embedded audio. Verify selection and procedure against installed-version documentation.
- Choose a supported codec: ProRes up to 2160p60; H.264 up to 1080p60; H.265 for 2160p up to 60 fps.
- Check media against the official list. If formatting is required, back up its contents and identify the exact medium: formatting erases files. exFAT works with Mac/Windows; HFS+ is native on Mac.
- Record a sample, stop, and play it back. Listen to audio, check duration, and inspect the file in the delivery workflow before the event.
Technical questions and show decisions
- The source is missing or recording will not start before the show: what should I check?
- What should I check if REC flashes or frames are dropped?
- Can I play a transparent file as fill/key?
- Can it play show clips and graphics, or should I use a playback system?
- Should I deliver an editing file or a smaller review file?
The source is missing or recording will not start before the show: what should I check?
Compare the SDI/HDMI selection and actual source format with the formats supported by Studio 4K Pro. A connected cable does not confirm that the right input is selected.
The HDMI input cannot capture copy-protected sources. Also check that the camera sends clean video: its graphics can be recorded.
What should I check if REC flashes or frames are dropped?
Record warning, input, codec, format, media and connections. Inspect a sample and prepare a sustained test of the planned path to distinguish signal reception, recording control and file writing.
Check the exact media model and capacity against the official list for that mode. Test the entire chain; one successful short test does not establish that a freeze is resolved.
Can I play a transparent file as fill/key?
Studio 4K Pro plays ProRes 4444 with fill and key over SDI A/B up to 2160p60. This is playback, not ProRes 4444 recording.
Prepare a compatible file and check picture and key separately on the receiving switcher. Verify resolution and frame rate on both outputs before the event.
Can it play show clips and graphics, or should I use a playback system?
For prepared clips, we review format, audio, order, and triggering. Graphics needing transparency require a compatible file and fill/key path; an image that looks right on a computer must still be tested at the receiving switcher.
We can compare deck playback with a playback system for last-minute changes, multiple screens, or a more complex cue sequence. Send a sample and tentative cue list so we can define file preparation and operation.
Should I deliver an editing file or a smaller review file?
We can shape a proposal around the recipient and intended use. Codec choice connects required quality, size, duration, and compatibility with the editing or review system.
We check a sample in the destination application and size the media for the agreed format. If editing and review versions are needed, we define how to create and deliver them; choosing another codec does not establish a second simultaneous recording.
Checks by symptom
| Symptom | Check | What it helps distinguish |
|---|---|---|
| No picture | Selected input and source format. | Input selection versus unsupported signal. |
| REC flashes | Mode, approved media, and path speed. | Recording versus a throughput bottleneck. |
| No transparency | ProRes 4444, A/B outputs, and receiver settings. | File versus key routing. |
Limits and precautions
Do not remove media or interrupt power during recording. Stop and check the file before moving it.
Compare source, input format and receiver before defining the path. If conversion is required, identify that task, its equipment and a signal/audio test at the destination.
Retain version and configuration before reviewing a symptom. Prepare changes using applicable documentation, backup and off-air rehearsal; record results in the sample file.
It has 2 internal AC supplies. Two inlets do not establish independent power: plan the circuits and test recovery with the actual system.
Define each deliverable and the path that creates it
| Path | What to compare | What to confirm with production |
|---|---|---|
| Record an output | SDI/HDMI input, format, codec and media. | Sample played at destination and original-copy owner. |
| Play fill/key | Compatible ProRes 4444 file and SDI A/B to switching. | Picture, transparency and frame rate verified at receiver. |
| Overlapping tasks | Recording, playback and handoff schedule. | Equipment, media and operator per task; rehearsal of planned concurrency. |
Retain the plan and per-destination acceptance
Use the destination worksheet for input, format, codec, media and recording duration. For playback, add clip, audio, fill/key, receiver and cue. Mark overlapping tasks and rehearsal/handoff owners.
Download the existing destination worksheet (.txt)
Use not yet defined and complete details later. The worksheet downloads blank; retain your copy and describe the need in Contact. Preparing a worksheet or draft does not send an enquiry.
Continue with the production segment you need
Each guide retains model-specific connections and limits. Compare the handoff and each supplier’s contribution.
Official documentation by model and edition
The Studio 4K Pro section was consulted separately from Studio HD/HyperDeck Extreme for formats, connections, media and fill/key playback. Manual reading is pending due to size; verify exact menus, warnings and media before configuration.
Documentation consulted
Review: October 30, 2026. Official Studio 4K Pro section consulted. No physical recording, playback, fill/key, media or power test performed.
