Model and documentation reference
Exact reference: CHAUVET Professional onAir Panel 1 IP, code ONAIRPANEL1IP, also called onAir IP Panel 1 by the manufacturer. The channel mapping here follows DMX Chart Rev. 2, pages 8–9. Record the unit version and personality to compare with the console profile. Other panels in the series need their own documentation.
CHAUVET Professional · onAir Panel 1 IP · ONAIRPANEL1IP
Event application
For a conference with an LED screen, separate light on faces from background brightness. Mark the speaker position, cameras and comparison area. Keep a reference framing and exposure so a change can be attributed to the panel. A good image from one camera does not establish the result from a different position or recording mode.
Selected 5Ch map: channels relative to start address
| Function | 5Ch channel | Record |
|---|---|---|
| Dimmer | 1 | Reference intensity |
| Fine dimmer | 2 | Fine adjustment with main dimmer |
| CCT | 3 | 4000 K: 090–096; 5600 K: 202–208 |
| Hue | 4 | Preserved comparison value |
| Strobe | 5 | 000–010: no function |
Console, output and final cable segment
Draw console → output or node → line → panel. Identify transport and universe on each segment: a physical connection alone does not establish matching patch data. In this five-channel map, start 101 occupies 101–105; 508 is the last start address fitting a 512-channel universe. These are patch calculations, not installation measurements. Record power separately from data and have the person responsible for the actual assembly assess supply and accessories.
onAir IP Panel 1 · DMX Chart Rev. 2 · EN · pp.8–9
Compare camera results one variable at a time
The official specification lists PWM at 600, 1200, 2000, 4000, 6000 and 25000 Hz. To investigate banding, our proposed comparison keeps camera, frame rate, shutter, exposure, CCT and intensity fixed while changing one setting at a time. Label clips and review recorded footage as well as the monitor. Then repeat the planned levels and fades. The conclusion applies to that tested combination; a frequency selection establishes no universal flicker-free result.
CHAUVET Professional · onAir Panel 1 IP · ONAIRPANEL1IP · onAir IP Panel 1 · DMX Chart Rev. 2 · EN · pp.8–9
Documentary preparation and agreed rehearsal
- Photograph the label and record version, personality, address, profile and panel owner.
- Mark faces, screen and camera positions; agree on a look and comparison criterion.
- Compare the 5Ch map with the actual console output. Record absolute address and transmitted value as well as the attribute name.
- Off program, record the camera comparison without changing PWM, exposure and intensity together in one take.
- Preserve original and selected states, repeat the cue recall and plan data-loss recovery separately using the applicable manual.
Frequently asked questions
Why does intensity respond while CCT does not?
Check the mode: 1Ch controls dimmer with locally selected color; 3Ch assigns CCT to channel 2. The table above is 5Ch. A different personality profile may move intensity without reaching the expected attribute.
Is a DMX value a linear temperature scale?
Do not convert it by proportional arithmetic. Check the chart range and actual output value; nominal white still needs evaluation with the camera and agreed white balance.
Does one clean clip validate every shot?
Record each combination of camera, recording mode and levels. When a condition changes, repeat the comparison and keep a clip that others can review.
Can this chart determine a data-loss blackout policy?
The channel chart does not document the complete loss and recovery policy. That decision needs the applicable manual and a rehearsal of the actual path, including downstream devices.
Does this guide confirm batteries or availability in Argentina?
It establishes no stock, supplied accessories or runtime. Include the intended supply, venue conditions and already defined equipment in the inquiry.
Follow control and distribution
Official edition-specific documentation
References: exact-model product specification and DMX Chart Rev. 2, pp. 8–9. Reading the channel chart does not replace the unit installation and operating manual. Contingency preparation awaits that document and the actual rehearsal.
