info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

← Back to guides and resources

Reference documentation · Lighting

Avolites Quartz: prepare cues and receive a showfile

Plan lighting for a presentation, theater or show from the incoming file to the stage output. Separate version, patch, programming and testing so your production can agree who prepares each task and which services are needed.

These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.

Model, version and capacity

This guide covers Avolites Quartz. Menu references use the Titan 19.0 web manual consulted on October 31, 2026; they do not identify installed software. Record console, Titan version, showfile origin and programming responsibility. For a unit running another version, compare its documentation before transferring steps.

The current product page states 16 universes processed by the console and expansion through TitanNet Processor to a 64-universe system limit. That does not mean 16 XLR connectors or 64 locally processed universes. Review show lines, physical or network destinations and required processing separately. No particular unit has been identified or tested.

Quartz · product · Titan 19.0 · DMX Settings · Quartz · support

Program application

For a conference, start with program moments: presenter, video playback and closing. Agree what should be visible in each area, the controls available to the operator and who calls each change. This is a planning proposal; it describes no completed event and establishes no console availability for your date.

Worksheet for turning the program into lighting decisions

Worksheet for turning the program into lighting decisions
Moment to prepareAgreement with productionRecord before the test
PresenterPlanned front and background lighting; areas that must remain visible.Cue name, fixtures and attributes it should contain.
Video or contentLighting during playback and who calls the transition.Entry/exit cues, proposed timing and playbacks that remain active.
Closing and audience departureStage and room state agreed with the venue.Cue, responsible operator, return sequence and unresolved conditions.

From the patch to an output that reaches the destination

The patch links each fixture’s personality, mode, address and line. DMX Settings maps lines to connectors or Art-Net/sACN destinations. Titan 19.0 describes Art-Net disabled by default in a new show; record its actual activation state. Keep a Titan line → protocol/universe or physical output → node/fixture map. Seeing a fixture on screen does not prove reception on stage.

Titan 19.0 · Patching · Titan 19.0 · DMX Settings · Titan 19.0 · Patching New Fixtures or Dimmers

Separate the visible look from the recorded content

Titan distinguishes the Programmer from visible output; check Record Mode before assuming what a cue contains. For the presenter, record intended fixtures and attributes. For video and closing, also list controls that must remain active. Compare each look during an agreed test from a known state, without experimenting with Clear or releases during the program.

Titan 19.0 · Cues · Titan 19.0 · Creating a Cue

Prepare showfile receipt and review

  1. Preserve the original with its version and provenance; use a working copy with a different name. Agree who approves the file and when an off-program review is possible.
  2. Compare source and destination versions. Quartz support warns that newer showfiles are not backwards compatible; do not promise they will open because the brand matches.
  3. Review personalities, modes, patch and output mapping in the copy. Record what must be checked at each receiver before accepting the programming.
  4. Plan a run-through of program cues, including transitions and a return to the agreed state. Record actual observations and differences before changing other controls.
  5. If incompatibility appears, keep the message and consult support for that unit. Upgrade and recovery are different: support warns that recovery may delete showfiles. This guide downloads or runs no installers, recovery tools or firmware.

Quartz · support

Frequently asked questions

Do 16 universes mean 16 XLR outputs?

No. Processing capacity, connector count and network destinations are different quantities. Prepare the map for the actual system you will use.

Is a show ready as soon as it opens?

Opening the file allows review to continue. Patch, personalities, outputs, cues and destination response still need checking; opening is not a completed system test.

Can I record exactly what I see?

Do not infer that from appearance. Check the Programmer, Record Mode and playbacks. The manual describes different recording policies; compare saved content during a controlled test.

Should we update Titan to open an incoming file?

First identify versions and the documented option for that unit. Preserve an independent copy and arrange a technical window with the responsible operator; this guide performs no update.

How can we start a service proposal?

Tell us the date, venue, program and what your production provides. If you have a file, state its version and what needs reviewing. Equipment, preparation, programming and operation can be evaluated for the agreed scope.

From control to node and network

Worksheet for preparing showfile, patch and cue tests

Official version-specific documentation

The consulted documentation is official English HTML. No PDF or software file is included. Links open the manufacturer source; check its version if the documentation changes.

Plan lighting for your event

Tell us about your event and which part of lighting you want to arrange. We can evaluate equipment and services for cue preparation, signal-path review and coordinated operation. Mention Quartz and the Titan version if known; you can start without a final rider.

Enquire about equipment and servicesView the related serviceEvent preparation guide