info@eventosglobales.com.arWhatsApp · +54 9 11 5626-6200

← Back to guides and resources

Reference documentation · Sound

QSC K8.2: correct input, THRU and mix to another speaker

Prepare speech and playback for a talk by separating incoming signal, what the audience hears and what feeds another destination. Choosing the right output avoids expecting the second speaker to follow a change the first never transmits.

These guides help you prepare and check your production systems. Documented models are technical references; enquire about the equipment and services we can prepare for your project.

Model and documentation reference

Exact model: QSC K8.2. The reference is K.2 Series manual TD-000523-01-G, 23 pages, which explicitly identifies K8.2 alongside other sizes. This guide uses its connections and signal path without transferring K10.2/K12.2 or original K8 supports, dispersion or capacity. Record the actual unit version and settings before planning the comparison.

QSC K.2 · TD-000523-01-G · EN · 23 pages · pp.10–14

Event application

For a presentation in a hall, name destinations by function: main audience, additional area and recording when required. Decide whether the second destination needs one source or the local mix. Our proposed segment list helps the operator identify which control affects each output. Speaker quantity and position need venue assessment rather than a calculation from catalog power.

Inputs and outputs: trace each path

Inputs and outputs: trace each path
PointDocumented functionPrepare
ALINE / MIC; no phantom powerSource type and sensitivity
BLINE / HI-Z; INST in menuLine or passive-pickup instrument
C3.5 mm stereo summed to monoMono destination or separate L/R path
A/B THRUCorresponding channel before GAINDistribute that source, not the local mix
MIX OUT (POST GAIN)A+B+C after GAIN, before DSPMix level and receiver settings

QSC K.2 · TD-000523-01-G · EN · 23 pages · pp.10–14

Trace level changes separately from processing

To distribute only input A, draw A → A THRU → second destination input. For locally mixed speech and music, draw A/B/C → MIX OUT → receiving line input. All three channel GAIN controls affect that mix; the first speaker EQ, subwoofer high-pass filter and delay do not travel through MIX OUT. The second therefore needs settings appropriate to its role. The manual prohibits feeding MIX OUT back into an input on the same unit.

QSC K.2 · TD-000523-01-G · EN · 23 pages · pp.10–14

Make the comparison locate the problem

Preserve the original state and compare with the same source and passage. Changing GAIN on the first speaker lets an agreed rehearsal reveal the difference between THRU and MIX OUT; do not make this comparison during the program. If SIG shows signal but audio is absent, that indicator does not establish complete amplifier and driver operation. Compare known source and cable and record which element the problem follows. A persistent unit anomaly requires removing it from that role and service assessment rather than an internal diagnosis from LEDs.

QSC · Mix Out vs Thru Out · 2024-08-30 · QSC · K.2 Mix Out and DSP · 2023-05-10

Prepare, compare and retain results

  1. Record K8.2 label, observed version, source, cable, sensitivity and GAIN. Preserve each speaker preset, SUB, EQ and DELAY.
  2. Assign source → input → selected output → destination. Identify who controls the outgoing mix and whether the destination needs full program or one source.
  3. Check LINE for a line-level console or keyboard output; do not select MIC automatically to compensate for a low level.
  4. During an agreed test, compare one path at a time and record SIG, heard level and second-destination response. Avoid changing source, cable and configuration together.
  5. Rehearse speech, playback and return; retain original, selected and outstanding settings. Do not start this comparison with resets or updates.

QSC K.2 · TD-000523-01-G · EN · 23 pages · pp.10–14

Frequently asked questions

Are HI-Z and MIC equivalent alternatives?

A provides MIC/LINE; B provides LINE/HI-Z. The B menu calls the passive-pickup option INST. A line source needs appropriate sensitivity; switching to MIC can raise level substantially and distort.

Can K8.2 provide microphone phantom power?

The manual states that A does not provide phantom power. If the microphone requires it, identify a compatible supply or console and its documentation before planning the connection.

Why does the second speaker not copy the preset or delay?

MIX OUT is before DSP. It receives the mix affected by GAIN, not the first speaker local processing. Document and verify each destination separately.

Will two speakers from MIX OUT retain stereo?

Input C sums to mono and MIX OUT carries the local mix. For left and right, plan separate source paths; duplicating that mix does not reconstruct L/R.

Can the datasheet establish audience capacity or a repair diagnosis?

It establishes neither venue coverage nor a specific fault. Record positions and actual listening. Preserve the comparison for service when a fault persists, without opening the unit.

Follow the audio path

Download input, THRU and mix worksheet

Official edition-specific documentation

QSC K.2 manual TD-000523-01-G: identity p. 1; safety pp. 2–3; ventilation p. 9; diagram p. 10; inputs pp. 11–12; outputs p. 13; sensitivity p. 14. Official support clarifications distinguish GAIN and DSP. No configuration, update or physical test was performed.

Plan audio for your event

For event audio planning in Argentina, share city, hall, audience layout, sources and additional destinations. If a K8.2 is already defined, include the chosen input/output and a diagram; stock assumptions are unnecessary to begin assessing the need.

Enquire about equipment and servicesView the related serviceEvent preparation guide