Let’s prepare LED signal and continuity
Tell us what must appear, what your production supplies and which interruptions you want covered. We can evaluate compatible processing rental or purchase and mapping, connection, configuration, rehearsal and operation services in Argentina. Start with an idea, approximate size or identification photos; technical details can follow.
What we agree for the proposal
Separate processor and cabling supply from preparation, tile association and operation. Agree who supplies the source, preserves the project and checks each destination. Backup is scoped by path: source, data, processor and power need different solutions and checks. The proposal identifies equipment, versions and tasks to contract.
Purpose and covered system
Tessera S8 processes LED displays with compatible Brompton receiving hardware. It supports canvas preparation, tile association and image adjustment for events, installations and camera workflows.
Identify the S8, tile model and revision, and Fixture Pack. Sharing processing features with SX40 does not imply the same capacity or distribution system.
Video, data and control
- Video
- HDMI 2.0 and 12G-SDI with Thru connections; the local interface monitor uses DisplayPort and USB peripherals. Local DisplayPort is not a content input.
- LED outputs
- Eight 1G EtherCON ports carry Tessera data to compatible tiles. Management Ethernet ports provide control and do not replace these outputs.
- Synchronization and control
- Bi-level/tri-level reference with Thru, DMX In/Thru and network control through Tessera Remote. Blackout and Freeze are on the front panel.
Requirements
A supported video source, identified tiles with suitable receiving hardware and Fixture Pack, pixel map, Gigabit Cat5e or better cabling, and power. Local operation needs a DisplayPort monitor, keyboard and mouse; remote control needs a computer and management network.
Define ports and paths for the required frame rate, bit depth and redundancy. Nominal output loading is 525,000 pixels at 60 Hz and 8 bits per color; higher bit depth or frame rate reduces available loading.
Basic preparation
- Save the current project and record processor and tile versions before changing the configuration.
- Connect the local interface or Tessera Remote through the management network. Confirm Video In and the selected input; check Blackout and Freeze when the input is valid but the picture is absent or not moving.
- Associate the tiles with the processor and check canvas position and orientation using a pattern. Distinguish the logical map from cabling order.
- Prepare input area, scaling and framing for actual content. Compare output loading and mode in the project; validating the input does not validate all distribution.
- If using closed-loop redundancy, prepare and test it before the event. Enabling or disabling the mode briefly blacks out video; do not use it as an improvised live test.
Use and troubleshooting questions
- Does a 4K source guarantee that the whole image fits my LED wall?
- Video is valid, but part of the wall is black or frozen. What should I compare?
- Will a redundant loop keep the wall running if the S8 fails?
- What should we evaluate when the LED wall looks good in the room but shows bands on camera?
- Can I use the S8 with my existing LED wall or replace a NovaStar controller?
Does a 4K source guarantee that the whole image fits my LED wall?
No. Input and output loading have different limits. A large source can be scaled or framed within the project, but each output must remain within its capacity for that mode.
The official data sheet specifies 4K60 input and eight 1G outputs. Nominal per-port capacity at 8 bits and 60 Hz does not mean eight 4K video outputs. A high frame rate does not also permit maximum resolution.
A provisional map and source format let us prepare framing and allocation alternatives. Agree mode, load and required recovery before selecting processing and configuration services.
Video is valid, but part of the wall is black or frozen. What should I compare?
Separate the path: Video In confirms a valid input; Tessera Out indicates tile connectivity. Also check Blackout, Freeze, association and canvas placement.
Compare a pattern with actual content. If part of a path fails, record the port, tile and timing before changing one variable. An error counter or forum case alone does not identify the failed component.
Will a redundant loop keep the wall running if the S8 fails?
The loop returns from the last tile to another port on the same processor. It protects the data path under its stated conditions; it does not add another working processor. A port pair has the capacity of one port, so redundancy uses capacity.
The documentation reserves processor redundancy for SX40. An S8 loop does not keep the system running if the processor itself fails. If the show requires that risk to be covered, a different architecture and a recovery test are needed; automatic switching between two S8 units cannot be assumed.
What should we evaluate when the LED wall looks good in the room but shows bands on camera?
Compare shots of a pattern and actual content, recording camera, shutter, frame rate and tile. S8 ShutterSync Camera Viewer requires Genlock; adjustment depends on the tile and needs testing with the actual camera.
We can prepare a test with the intended cameras and retain accepted samples and settings. Coordinate exposure, panel or architecture changes with camera production and display design before the event.
Can I use the S8 with my existing LED wall or replace a NovaStar controller?
A matching cable is not enough: identify the installed receiver, panel model and revision, and Tessera compatibility. A compatible HDMI or SDI input at the processor does not confirm compatibility with the output panels.
Start with labels and available documentation without opening panels. We can evaluate retaining the existing compatible control and adapting the source, or quote a compatible panel and processing system. Rental, purchase, configuration and operation scope follows that identification.
Checks by symptom
| Symptom | Check | Path being investigated |
|---|---|---|
| No source picture | Selected input, Video In, progressive format and Blackout. | Video before blaming tiles. |
| Only some tiles fail | Association, position, wiring and port loading. | Mapping or affected distribution path. |
| Pattern is correct but content differs | Project scaling, framing and input region. | Content processing. |
| Backup behaves unexpectedly | Loop status, ports and documented mode. | Cable protection versus processor recovery. |
Limits and precautions
Maintain ventilation and an ambient temperature of 0–40 °C. Before arranging power, check the unit label, revision and applicable documentation; published ranges from different references are reviewed separately.
The SDI input supports 2SI; SQ is unsupported in the S8 documentation. A matching connector does not justify copying another processor configuration.
HDMI Thru is intended for confidence monitoring; the manual recommends upstream distribution for critical paths. Do not start troubleshooting with Reset: factory restoration deletes projects and Fixture Packs not included in base firmware.
Before planning software changes, check hardware compatibility. The consulted release notes require software 3.4 or later for S8 units whose serial number starts with 02; this is not an instruction to update during an event.
Use the LED worksheet and define the rehearsal result
Record unit and versions, source, ports, load, panels and starting state. For a loop, record the port pair supported for the identified revision/version, outgoing/return paths and failure to test outside the program. The pair carries one output’s capacity in that mode; verify allocation in the actual project.
Download the existing LED worksheet (.txt)
Leave details undefined where needed. The worksheet downloads blank; retain your copy and describe the goal in Contact. Preparing the worksheet or opening the form does not send an enquiry.
Compare the path and identified platform
Each guide retains its model and scope. If the panel uses another platform, follow its documentation before proposing a replacement processor.
Official model and feature documentation
Use S8 sections for connections and control, and redundancy sections to distinguish the loop from processor recovery. Verify system load, modes and versions. HTML sources open on Brompton’s site.
- Official model and feature documentation · 1
- Official model and feature documentation · 2
- Official model and feature documentation · 3
- Official model and feature documentation · 4
- Official model and feature documentation · 5
- Official model and feature documentation · 6
- Official model and feature documentation · 7
- Official model and feature documentation · 8
- Official model and feature documentation · 9
Documentation consulted
Review: October 30, 2026. S8 hardware, 1G connections, HFR output loading, redundancy, ShutterSync and compatibility checked in official HTML. No equipment configuration or recovery test.
